Abstract:To further improve the Fe45Mn35Co10Cr10 high–entropy alloy coating prepared by plasma spraying, laser remelting was used to improve its structures and tribological properties. The effects of laser remelting on the microstructure, element composition, phase and hardness of obtained coating were investigated using a super depth of field microscope, energy dispersive spectrometer, X–ray diffraction and hardness tester, respectively. The tribological properties were measured via a ball–on–disk tester at room temperature and 500 °C, and the wear mechanisms were also discussed. The results show that the laser–remelted HEA coating is still composed of face–centered cubic structure, and its hardness is increased by ~301.4% compared with the plasma–sprayed coating, which is attributed to the grain refinement and solid solution strengthening effects. The average coefficient of friction and wear rate of laser–remelted HEA coating is superior to the plasma–sprayed HEA coating, showing that the laser remelting process plays the roles of friction reduction and wear resistance. The wear mechanism of plasma–sprayed HEA coating at room temperature is fatigue wear, abrasive wear and oxidative wear; while that of laser–remelted coating is abrasive wear and oxidative wear. Moreover, the wear mechanism of plasma–sprayed coating at 500 °C is adhesive wear, abrasive wear and oxidative wear, while that of laser–remelted HEA coating is adhesive wear and oxidative wear, which is attributed to the reduction of plastic deformation by the softening effect at high temperature.

Laser polishing of a high-entropy alloy manufactured by selective laser melting

Progress of high-entropy alloys prepared using selective laser melting

Recent progress on the microstructure and properties of high entropy alloy coatings prepared by laser processing technology: A review

Enhanced Surface Properties of the Al0.65CoCrFeNi High-Entropy Alloy via Laser Remelting

Optimization of microstructure and properties of laser sintered Ni30Cr25Al15Co15Mo5Ti5Y5 high-entropy alloy coatings via controlling plasma

Improving surface quality and superficial microstructure of LDED Inconel 718 superalloy processed by hybrid laser polishing

Selective laser melting of the Al0.3CoCrFeNiCu high-entropy alloy: Processing parameters, microstructure and mechanical properties

Optimization of Laser-Wavelength Dependence for Open-Air Atmospheric Pressure Pulsed Laser Deposition of AlCrFeMnTi High-Entropy Alloy for Tailored Surface Properties

Research on the laser melting coating process of an AlCoCrFeNi high‐entropy alloy

Gradient structured high-entropy alloy with high hardness and corrosion resistance after laser shock peening

Surface modification for AlCoCrFeNi2.1 eutectic high-entropy alloy via laser remelting technology and subsequent aging heat treatment

Strengthening CrFeCoNiMn0.75Cu0.25 high entropy alloy via laser shock peening

Laser-cladding of high entropy alloy coatings: an overview

Effects of laser remelting on microstructure and tribological properties of plasma–sprayed Fe45Mn35Co10Cr10 high–entropy alloy coating

Selective Laser Melting (SLM) Additively Manufactured CoCrFeNiMn High-Entropy Alloy: Process Optimization, Microscale Mechanical Mechanism, and High-Cycle Fatigue Behavior

Laser repairing of FeCoCrNiV high-entropy alloy and its mechanical and cutting characteristics

Hybrid Nanostructures and Stabilized Mechanical Properties of High‐Entropy Alloy Induced by Warm Laser Shock Peening

Effects of Laser Powers on Microstructures and Mechanical Properties of Al0.5FeCoCrNi High-Entropy Alloys Fabricated by Laser Melting Deposition

In-situ synthesis of CoCrFeMnNi high-entropy alloy by selective laser melting

Enhanced wear and corrosion resistances of AlCoCrFeNi high-entropy alloy coatings via high-speed laser cladding

High-strength Fe32Cr33Ni29Al3Ti3 fabricated by selective laser melting