An online tunable TE11 dual-circular polarizer applied for modern high-power radar system

Lihao Wei,Yixin Wan,Xinjie Li,Zihao Dai,Chenrui Wei,Jianxun Wang

DOI: https://doi.org/10.1063/5.0181461

IF: 1.697

2024-01-01

AIP Advances

Abstract:Circular polarizers have essential applications in modern radar and communication systems. However, an online tunable wideband dual-circular polarizer with a power capability of more than 150 kW in the Ku band has not been reported yet, and it has recently become a fundamental problem for developing some high-power radar systems. This paper has designed an overmoded waveguide operating in the TE11 mode with a non-contact cutting-off choke to imply a high power capability. A high-precision stepping motor is used to control the rotation of an elliptical waveguide remotely, and then, the left-hand and right-hand circular polarizations can be switched online. The dual-circular polarizer has been fitted on a 150 kW gyro-TWT high-power test system, and the experimental results show a tremendous high-power capability. The microwave leakage caused by the non-contact gap is reduced to less than −35 dB. The polarization bandwidth exceeds 2.5 GHz in the Ku band, and the axial ratio is better than 1.3 dB. This design concept provides a reference for future high-power radar systems.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology

What problem does this paper attempt to address?

This paper aims to address the need for dual - circular polarizers in modern high - power radar systems. Specifically, the paper designs an on - line tunable broadband dual - circular polarizer that can provide a power capacity of over 150 kilowatts in the Ku - band. The following are the main problems and solutions in the paper:

### Main Problems
1. **High - Power Requirement**: Existing dual - circular polarizers usually have a power capacity of no more than 150 kilowatts in the Ku - band, which limits their application in high - power radar systems.
2. **On - line Tunability**: Traditional dual - circular polarizers usually do not have the ability to adjust the polarization direction on - line, which is an important limitation in practical applications.
3. **Microwave Leakage**: Due to the non - contact gaps introduced by mechanical structure adjustment, there is a risk of microwave leakage in high - power systems.

### Solutions
1. **Over - moded Elliptic Waveguide**: The paper designs an over - moded elliptic waveguide operating in the TE11 mode, achieving high - power capacity through a non - contact cutoff choke.
2. **Remote Control**: Use a high - precision stepping motor to remotely control the rotation of the elliptic waveguide, thereby achieving on - line switching between left - hand and right - hand circular polarizations.
3. **Reduce Microwave Leakage**: Design a non - contact cutoff choke, successfully reducing microwave leakage to below - 35 dB.

### Experimental Verification
- **High - Power Test**: The dual - circular polarizer was installed on a 150 - kilowatt gyro - traveling - wave - tube (gyro - TWT) high - power test system, and the experimental results show that it has extremely high power capacity.
- **Microwave Leakage**: Through optimized design, microwave leakage is effectively controlled below - 35 dB.
- **Polarization Bandwidth**: In the Ku - band, the polarization bandwidth exceeds 2.5 GHz, and the axial ratio is better than 1.3 dB, meeting the requirements of engineering applications.

### Conclusion
The paper proposes an on - line tunable high - power dual - circular polarizer suitable for modern high - power radar systems. Through the design of the over - moded elliptic waveguide and the non - contact cutoff choke, the problems of high - power capacity and microwave leakage are solved, and its effectiveness and stability are verified by experiments. This design provides a feasible reference for future high - power radar systems.