Abstract:The lithium-sulfur (Li-S) battery has received widespread attention because of the high theoretical energy density and inexpensive raw material. However, some issues still restrict its commercialization, including the shuttle effect, the lithium dendrite growth and low safety, etc. In this work, a PMMA-LLZO/PP/AB multifunctional separator was designed and facilely prepared to overcome these problems. A composite dense layer of the PMMA and LLZO sheets with excellent interface stability was coated on one side of the PP separator to face lithium metal anode, which can inhibit the lithium dendrites growth and increase the safety. Meanwhile, this composite coating possesses high affinity with the liquid electrolyte and the soluble polysulfides, which can improve the ionic conductivity, effectively adsorb the polysulfides. An acetylene black (AB) layer was further coated on the other side of the PP separator to not only act as an electron conductor but also adsorb and hinder the migration of lithium polysulfides. The co-modified PMMA-LLZO/PP/AB separator displays remarkable electrochemical performances and an excellent thermal stability. The cell with the co-modified separator exhibits high specific capacities of 1456 mAh g−1 at 0.1 C and 969 mAh g−1 at 1.0 C, and retains a capacity of 413 mAh g−1 after 500 cycles, corresponding to a retention of 42.6% as well as a low decay of 0.114%/cycle. Especially, the cell with the multifunctional separator also displays a high capacity and a low decay even for a high sulfur mass loading cathode of 2.5-3.0 mg cm−2 or at a high temperature of 60 °C. The co-modified multifunctional separator has great application potential in the high-performance Li-S battery.

Improved Li–S batteries obtained by using multifunctional separators modified with vapor grown carbon Fiber/MoS2 composites

Three-Dimensional Ordered Fevo4 Nanocatalyst-Modified Separator Enables Suppressed Polysulfides Shuttling and Boosted Redox Conversion in Li-S Batteries

Enhanced cycle performance of lithium-sulfur batteries using a separator modified with a PVDF-C layer.

Enhanced Sulfur Redox and Polysulfide Regulation via Porous VN-Modified Separator for Li-S Batteries

Porous polymer composite separators with three-dimensional ion-selective nanochannels for high-performance Li–S batteries

Towards High-performance Lithium-Sulfur Batteries: the Modification of Polypropylene Separator by 3D Porous Carbon Structure Embedded with Fe3C/Fe Nanoparticles

A bifunctional double-layer Fe 3 O 4 -Polyvinylidene fluoride(PVDF)/PVDF separator with enhanced thermal stability for Li-S batteries

A Multifunctional Separator for High-Performance Lithium-Sulfur Batteries

A robust electrospun separator modified with in situ grown metal-organic frameworks for lithium-sulfur batteries

A 3D MoS2/Graphene Microsphere Coated Separator for Excellent Performance Li-S Batteries

Multifunctional interlayer with simultaneously capturing and catalytically converting polysulfides for boosting safety and performance of lithium-sulfur batteries at high-low temperatures

Empowering polypropylene separator with enhanced polysulfide adsorption and reutilization ability for high-performance Li-S batteries

Enhanced sulfur utilization in lithium-sulfur batteries by hybrid modified separators

A multifunctional separator modified with cobalt and nitrogen co-doped porous carbon nanofibers for Li–S batteries

Ni/SiO2/Graphene-modified separator as a multifunctional polysulfide barrier for advanced lithium-sulfur batteries

Ultralight carbon flakes modified separator as an effective polysulfide barrier for lithium-sulfur batteries

A viscous oligomer multifunctional separator coating to enable high specific energy lithium-sulfur battery

Efficient capture and conversion of polysulfides by zinc protoporphyrin framework-embedded triple-layer nanofiber separator for advanced Li-S batteries

Efficient polysulfides trapping and redox enabled by Co/N-carbon implanted Li+-montmorillonite for advanced lithium-sulfur batteries

A dual-coated multifunctional separator for the high-performance lithium-sulfur batteries

A flame retardant separator modified by MOFs-derived hybrid for safe and efficient Li-S batteries