Kexin Wang,Zelong Wang,Yuxuan Wu,Lifang Du,Haoran Zheng,Jing Jiao,Fang Wu,Yuchang Xun,Yuan Xia
Abstract:Lidar observations of metal layers play a significant role in research on the chemistry and dynamics of the mesosphere and lower thermosphere. This work reports on Fe lidar observations conducted in Beijing and Mohe. Utilizing the same laser emission system, a 1064 nm seed laser was injected into an Nd: YAG laser to generate a single longitudinal-mode pulse 532 nm laser, which pumped a dye laser to produce a 572 nm laser. The 572 nm laser and the remaining 1064 nm fundamental frequency laser passed through a sum–frequency module to generate a 372 nm laser to detect the Fe layer. According to a total of 52.6 h of observations for 10 nights in Beijing, the Fe layer has an average column density of 1.24 × 1010 cm−2, an RMS width of 4.4 km and a centroid altitude of 89.4 km. In Mohe, observed for 16 nights and a total of 91.5 h, the Fe layer has an average column density of 1.08 × 1010 cm−2, an RMS width of 4.6 km and a centroid altitude of 89.5 km. The probability of the occurrence of sporadic Fe layers was 42.4% in Beijing and 29.4% in Mohe. Compared to simultaneously observed Na layers, the occurrence probabilities of sporadic Fe layers were higher than those of sporadic Na layers in both stations. Based on the two cases observed in Beijing, it is conjectured that the formation mechanism of sporadic metal layers above approximately 100 km has a more significant influence on sporadic Fe layers than on sporadic Na layers. The lower thermospheric Fe layers with densities significantly larger than those of the main layer were observed during two nights in Mohe. This work contributes to the refinement of the global distribution of Fe layers and provides abundant observational data for the modeling and study of the metal layers.
What problem does this paper attempt to address?
This paper aims to solve the problem of insufficient observational data of the Fe layer in the Mesopause and Lower Thermosphere (MLT). Specifically, the study attempts to fill the gap in Fe - layer observations in East Asia, especially in the mid - high latitudes, by conducting Lidar observations in Beijing (40.5°N, 116.0°E) and Mohe (53.5°N, 122.4°E), and provide more observational data for the global Fe - layer distribution. In addition, the study also explores the formation mechanisms of sporadic Fe layers and lower thermospheric Fe layers and their relationships with other metal layers (such as the Na layer).
### Research Background
The Mesopause and Lower Thermosphere are regions in the atmosphere from 50 to 120 kilometers in altitude. When meteors and extraterrestrial dust enter the Earth's atmosphere, they will be ionized, evaporated or sputtered to produce metal vapors, forming metal layers covering the global atmosphere. These metal layers are composed of various metal atoms, ions and oxides, including sodium (Na), potassium (K), iron (Fe), nickel (Ni), calcium (Ca), magnesium (Mg), etc. These metal particles are important tracers for studying the chemical and kinetic processes in this region.
### Research Purposes
1. **Fill the Gap in Fe - layer Observations in East Asia**: Currently, there are few Fe - layer observation sites in East Asia, especially in the mid - high latitudes. In this study, Lidar observations of the Fe layer were carried out in Beijing and Mohe, providing valuable observational data.
2. **Analyze the Characteristics of the Fe Layer**: By observing the Fe layers in Beijing and Mohe, study their characteristics such as column density, RMS width and centroid height, and compare them with data from other global observation sites.
3. **Explore the Formation Mechanisms of Sporadic Fe Layers and Lower Thermospheric Fe Layers**: The study found that sporadic Fe layers appear in the altitude range of 90 to 110 kilometers, with different structures and dynamic characteristics. The study also explored the relationship between these sporadic Fe layers and the Na layer, as well as their formation mechanisms.
### Main Findings
- **Average Characteristics of the Fe Layer**:
- In Beijing, the average column density of the Fe layer is \(1.24\times10^{10}\text{cm}^{-2}\), the RMS width is 4.4 kilometers, and the centroid height is 89.4 kilometers.
- In Mohe, the average column density of the Fe layer is \(1.08\times10^{10}\text{cm}^{-2}\), the RMS width is 4.6 kilometers, and the centroid height is 89.5 kilometers.
- **Sporadic Fe Layers**:
- In Beijing, the occurrence probability of sporadic Fe layers is 42.4%, while in Mohe it is 29.4%.
- The occurrence frequency of sporadic Fe layers is higher than that of sporadic Na layers, indicating that there may be different formation mechanisms between them.
- **Lower Thermospheric Fe Layers**:
- In two night - time observations in Mohe, lower thermospheric Fe layers were found, and their densities were significantly higher than those of the main layer, indicating that the Fe layers in the lower thermosphere may be affected by different mechanisms.
### Conclusion
This study, through Lidar observations in Beijing and Mohe, provides new data on the Fe layer, which is helpful for improving the global Fe - layer distribution database. At the same time, the research results provide an important basis for further understanding the chemical and kinetic evolution characteristics of the Mesopause and Lower Thermosphere.