Abstract:Arterial stiffness (AS) refers to the loss of arterial compliance and alterations in vessel wall properties. The study of local carotid stiffness (CS) is particularly important since carotid artery stiffening raises the risk of stroke, cognitive impairment, and dementia. So, stiffness measurement as a screening tool approach is crucial because it can reduce mortality and facilitate therapy planning. This study aims to evaluate the stiffness of the CCA using machine learning (ML) through the features of diameter change (ΔD) and stiffness parameters. This study was conducted in seven stages: data collection, preprocessing, CCA segmentation, CCA lumen diameter (DCCA) computing during cardiac cycles, denoising signals of DCCA, computational of AS parameters, and stiffness assessment using ML. The 51 videos (with 25 s) of CCA B-mode ultrasound (US) were used and analyzed. Each US video yielded approximately 750 sequential frames spanning about 24 cardiac cycles. Firstly, US preset settings with time gain compensation with a U-pattern were employed to enhance CCA segmentations. The study showed that auto region-growing, employed three times, is appropriate for segmenting walls with a short running time (4.56 s/frame). The diameter computed for frames constructs a signal (diameter signal) with noisy parts in the shape of peak variance and an un-smooth side. Among the 12 employed smoothing methods, spline fitting with a mean peak difference per cycle (MPDCY) of 0.58 pixels was the most effective for the diameter signal. The authors propose the MPDCY as a new selection criterion for smoothing methods with highly preserved peaks. The ΔD (Dsys-Ddia) determined in this study was validated by statistical analysis as a viable replacement for manual ΔD measurement. Statistical analysis was carried out by Mann-Whitney t-test with a p-value of 0.81, regression line R2 = 0.907, and there was no difference in means between the two groups for box plots. The stiffness parameters of the carotid arteries were calculated based on auto-ΔD and pulse pressure. Five ML models, including K-nearest neighbor (KNN), support vector machine (SVM), decision tree (DT), logistic regression (LR), and random forest (RF), fed by distension (ΔD) and five stiffness parameters, were used to distinguish between the stiffened and un-stiffened CCA. Except for SVM, all models performed excellently in terms of specificity, sensitivity, precision, and area under the curve (AUC). In addition, the scatterplot and statistical analysis of the fed features confirm these remarkable outcomes. The scatter plot demonstrates that a linear hyperline can easily distinguish between the two classes. The statistical analysis shows that the stiffness parameters computed from the database of this work were statistically (p < 0.05) distributed into the non-stiffness and stiffness groups. The presented models are validated by applying them to additional datasets. Applying models to other datasets reveals a model performance of 100%. The proposed ML models could be applied in clinical practice to detect CS early, which is essential for preventing stroke.

A Quadruple-Sweep Bioimpedance Sensing Method for Arterial Stenosis Detection

New Technologies in the Assessment of Carotid Stenosis: Beyond the Color-Doppler Ultrasound—High Frame Rate Vector-Flow and 3D Arterial Analysis Ultrasound

An image-free ultrasound method to estimate artery wall thickness surrogate for screening

Continuous Assessment of Carotid Diameter using an Accelerometer Patch Probe for Ambulatory Arterial Stiffness Monitoring

Towards Estimating Arterial Diameter Using Bioimpedance Spectroscopy: A Computational Simulation and Tissue Phantom Analysis

Automatic Diagnosis of Carotid Atherosclerosis Using a Portable Freehand 3D Ultrasound Imaging System

Development of a Tetherless Bioimpedance Device That Uses Morphologic Changes to Predict Blood Flow Restrictions Mimicking Peripheral Artery Disease Progression

Fully automatic carotid arterial stiffness assessment from ultrasound videos based on machine learning

Evaluation of Intima-Media Thickness and Arterial Stiffness as Early Ultrasound Biomarkers of Carotid Artery Atherosclerosis

Automated 3D geometry segmentation of the healthy and diseased carotid artery in free-hand, probe tracked ultrasound images

Arteriosclerosis Assessment based on Single‐Point Fingertip Pulse Monitoring Using a Wearable Iontronic Sensor

A Feasibility Study of Carotid Elastography for Risk Assessment of Atherosclerotic Plaques Validated by Magnetic Resonance Imaging

Simultaneous Coherent and Displacement Compounding for 2-D Noninvasive Carotid Strain Imaging: A Proof of Principle Study

A semi‐active human digital twin model for detecting severity of carotid stenoses from head vibration—A coupled computational mechanics and computer vision method

A Video-based Automated Tracking and Analysis System of Plaque Burden in Carotid Artery Using Deep Learning: A Comparison with Senior Sonographers

Biomechanical mechanism of noninvasive plaque detection based on multi-sensor fusion

A proof of concept study for machine learning application to stenosis detection

Imaging of Carotid Stenosis: Where Are We Standing? Comparison of Multiparametric Ultrasound, CT Angiography, and MRI Angiography, with Recent Developments

Detection of Subclinical Atherosclerosis in Asymptomatic Subjects Using Ultrasound Radiofrequency-Tracking Technology.

CASMatching Strategy for Automated Detection and Quantification of Carotid Artery Stenosis Based on Digital Subtraction Angiography

Software that combines deep learning, 3D reconstruction and CFD to analyze the state of carotid arteries from ultrasound imaging