Abstract:Graphene encapsulated liquid metal particles is a novel and promising class of biphasic composite, with application in the next generation of electronic devices. Here, rapid, low‐cost, and scalable fabrication of solution processed large area rGO@EGaIn electrodes is demonstrated. rGO@EGaIn solution is first deposited over the substrate through spray coating, and then processed through a low‐cost laser (master oscillator power amplifier (MOPA)). This allows simultaneous reduction, thinning, ablation, and high resolution patterning of the deposited films. Surprisingly, it is found that by adjusting the laser parameters, it is possible to make semitransparent conductors via laser thinning of the films. Scanning electronic microscopy (SEM) and energy dispersive X‐ray spectroscopy (EDS) spectroscopy confirm that although the rGO/EGaIn weight ratio is only ≈0.08, the composite has a considerably different microstructure compared to the eutectic gallium–indium alloy (EGaIn) particles alone. Graphene oxide (GO) protects the EGaIn from extreme morphology change under laser irradiation. Therefore, various “shades” of rGO@EGaIn can be fabricated in a single film. This allows development of large electrodes with complex geometries in a few seconds. The conductivity, transparency, and reduction of the laser processed films are characterized by several techniques and an example of application is demonstrated by laser patterning a highly sensitive breath‐monitoring sensor. In this article, for the first time, the laser irradiation of spray coated liquid metal particles encapsulated with graphene oxide (GO) is reported. The laser reduction process of GO is demonstrated to fabricate opaque and semitransparent electrodes on a glass substrate. Finally, an application of high‐resolution laser patterns is developed for human breath sensing.

A laser-assisted chlorination process for reversible writing of doping patterns in graphene

Programmable graphene doping via electron beam irradiation

Laser Writing of Eutectic Gallium–Indium Alloy Graphene‐Oxide Electrodes and Semitransparent Conductors

Reversible optical doping of graphene

Nanoscale Control of Rewriteable Doping Patterns in Pristine Graphene/Boron Nitride Heterostructures

Laser Direct Writing of Graphene Nanostructures Beyond the Diffraction Limit by Graphene Oxidation

Reversible writing of high-mobility and high-carrier-density doping patterns in two-dimensional van der Waals heterostructures

Laser‐Driven Modular Precision Chemistry of Graphene Using λ3‐iodanes

Laser-Scribing Technology for Wafer-Scale Graphene Devices

Phase shifting mask modulated laser patterning on graphene.

An All-Optical Modulation Method in Sub-Micron Scale.

Laser-mediated programmable n doping and simultaneous reduction of graphene oxides

Tunable Graphene Oxide Reduction and Graphene Patterning at Room Temperature on Arbitrary Substrates

Doping of Laser‐Induced Graphene and Its Applications

Direct Laser Writing of Vertical Junctions in Graphene Oxide Films for Broad Spectral Position-Sensitive Detectors

Tailorable Electronic and Electric Properties of Graphene with Selective Decoration of Silver Nanoparticles by Laser-Assisted Photoreduction

Selective-area Fluorination of Graphene with Fluoropolymer and Laser Irradiation.

Simultaneous transfer and doping of CVD-grown graphene by fluoropolymer for transparent conductive films on plastic.

Doping of Cr in Graphene Using Electron Beam Manipulation for Functional Defect Engineering

Droplet-Pen Writing of Ultra-Uniform Graphene Pattern for Multi-Spectral Applications