Abstract:With the fast consumption of traditional fossil fuels and the urgent requirement for a low-carbon economy and sustainable development, supercapacitors are gaining more and more attention as a clean energy storage and conversion device. The research on electrode materials for supercapacitors has become a hot topic nowadays. An electrode material for a supercapacitor, comprising the ZIF-67 in-built carbon-based material, was prepared from a biomass pre-hydrolysate via a hydrothermal process. As a by-product of dissolving slurry, the pre-hydrolysate is rich in carbon, which is an excellent biomass resource. The utilization of pre-hydrolysate to prepare carbon energy materials could realize the high value utilization of pre-hydrolysate and the efficient energy conversion of biomass. Meanwhile, the cobalt-based MOF (such as ZIF-67), as a porous crystalline material, has the advantages of having a regular order, high specific surface area and controllable pore size, as well as good thermal and chemical stability. The addition of ZIF-67 modified the morphology and pore structure of the carbon, and the obtained samples showed outstanding electrochemical performance. One- and two-step synthetic processes generated specimens with a coral-like cross-linked structure and a new type of rough, hollow, dandelion-like structure, respectively, and the pore size was in the range of 2.0–5.0 nm, which is conducive to ion transport and charge transfer. In C2-ZIF-67, the hollow structures could effectively prevent the accumulation of the electrochemical active center, which could provide enough space for the shrinkage and expansion of particles to protect them from the interference of electrolytes and the formation of solid electrolyte interphase film layers. Additionally, the plush tentacle structure with low density and a large specific surface area could expose more active sites and a large electrolyte electrode contact area, and short electron and charge transport paths. Importantly, active, free electrons of small amounts of Co-MOF (1 wt%) could be stored and released through the redox reaction, further improving the electrical conductivity of Carbon-ZIF-67 materials in this work. Consequently, C2-ZIF-67 exhibited superior specific capacitance (400 F g−1, at 0.5 A g−1) and stability (90%, after 10,000 cycles).

Revealing 1T-MoS 2 with 76 % purity induced by various saccharides for supercapacitor performance

Design of few-layered 1T-MoS2 by supramolecular-assisted assembly with N-doped carbon quantum dots for supercapacitor

Layer-By-Layer Polyelectrolyte Assisted Growth of 2d Ultrathin Mos2 Nanosheets on Various 1d Carbons for Superior Li-Storage

Hierarchical 1T-MoS2 nanotubular structures for enhanced supercapacitive performance

Electrochemical method integrating exfoliation and in-situ growth to synthesize MoS2 nanosheets/MnO2 heterojunction for performance-enhanced supercapacitor

Porous Hybrid Composites of Few-Layer MoS2 Nanosheets Embedded in a Carbon Matrix with an Excellent Supercapacitor Electrode Performance.

Tailoring the morphologies of molybdenum selenides with improving their electrochemical performances for supercapacitors

Unveiling highly ambient-stable multilayered 1T-MoS2 towards all-solid-state flexible supercapacitors

One-step Synthesis of MnS/MoS2/C Through the Calcination and Sulfurization of a Bi-Metal-organic Framework for a High-Performance Supercapacitor and Its Photocurrent Investigation.

Preparation of Few-Layered MoS2 by One-Pot Hydrothermal Method for High Supercapacitor Performance

Phase engineering of Mo1-xWxS2 nanosheets for flexible supercapacitors

One-Step Hydrothermal Synthesis of MoO2/MoS2 Nanocomposites as High-Performance Electrode Material for Supercapacitors.

Formation of molybdenum–cobalt sulfide by one-step hydrothermal reaction for high-performance supercapacitors

Stable Sandwich-Like Biomass Carbon@MoS 2 Composite Material with Enhanced Sodium Storage Performance

Capacitive behavior of MoS2 decorated with FeS2@carbon nanospheres

In-Built Fabrication of MOF Assimilated Porous Hollow Carbon from Pre-Hydrolysate for Supercapacitor

Use of a diatomite template to prepare a MoS2/amorphous carbon composite and exploration of its electrochemical properties as a supercapacitor

Designed fabrication of MoS2 hollow structures with different geometries and the comparative investigation toward capacitive properties

Facile synthesis Zn-Ni bimetallic MOF with enhanced crystallinity for high power density supercapacitor applications

Synthesis, formation mechanism and supercapacitor performance of MoS2/Mo2C/C nanofibers

In‐situ formation and intercalation of carbon dots induced high‐yield 1T‐molybdenum disulfide as electrode materials