Abstract:The present work addresses the topic of automated calibration of numerical models starting from the experimental characterization of the structure's dynamic behaviour. The importance of the topic is well known in the literature, especially in cases where it is necessary to have at disposal validated numerical models, necessary for the correct evaluation of the safety of existing buildings. Generally, the calibration problem is developed with a manual approach (manual tuning), with a positive outcome whenever there is a good knowledge of the boundary and internal constraint conditions and the elastic mechanical properties of the construction's constituent materials. Conversely, the positive outcome is particularly difficult to achieve manually when there are non-homogeneous and/or complex structures, as in the cases of historic masonry structures, which are often the result of constructions carried out at different times, organized in aggregates whose interaction between the portions is not simple to understand. For this purpose, the present work, using commercial software and specially prepared routines, illustrates a semi-automatic procedure, which employs genetic algorithms, suitable for the optimized identification of the numerical model that best represents the structure's experimental dynamic behaviour. The procedure is presented with reference to two case studies: the Gabbia Tower historic masonry aggregate in Mantua and the bell tower of the Monastery of the Ursuline nuns in Capriolo, Brescia. In the first case, in addition to the experimental dynamic characterization, a good instrumental characterization of the tower's masonry mechanical properties is available. In the second case, alongside a good experimental dynamic characterization, only a qualitative estimate of the masonry mechanical properties, based on visual inspections, is available. The two case studies allow for testing the validity of the numerical models' calibration procedure, necessary for their application in the field of safety checks. Finally, for the case studies analysed the work presents an assessment of seismic vulnerability starting from the models identified with the semi-automatic procedure. The seismic vulnerability assessment was obtained using non-linear static analysis following the N2 method.

Application of OMA technique to masonry slender towers: FEM updating and sensitivity analysis

Operational modal analysis, seismic vulnerability assessment and retrofit of a degraded RC bell tower

VULNERABILITY ASSESSMENT OF A CIVIC TOWER USING AMBIENT VIBRATION TESTS

Effects of Geometrical Features on the Seismic Response of Historical Masonry Towers

Influence of soil deformability on the seismic response of a masonry tower

Evaluation of different approaches for the estimation of the seismic vulnerability of masonry towers

Structural performance assessment of full-scale masonry wall systems using operational modal analysis: Laboratory testing and numerical simulations

Output-Only Modal Identification of Ancient L’Aquila City Hall and Civic Tower

Observed damage and simplified risk assessment of Italian masonry bell towers struck by past seismic events

Assessment of Seismic Retrofitting Interventions of a Masonry Palace Using Operational Modal Analysis

Semi-automatic calibration of numerical models for the seismic safety assessment of masonry towers embedded in building aggregates

Synergistic application of operational modal analysis and ambient noise deconvolution interferometry for structural and damage identification in historic masonry structures: three case studies of Italian architectural heritage

Dynamic Characterisation and Seismic Vulnerability Assessment of Existing Masonry Port Structures

Long-Term Seismometric Monitoring of the Two Towers of Bologna (Italy): Modal Frequencies Identification and Effects Due to Traffic Induced Vibrations

Investigations of masonry churches seismic performance with numerical models: application to a case study

Environmental effects on the experimental modal parameters of masonry buildings: experiences from the Italian Seismic Observatory of Structures (OSS) network

Fast Vulnerability Evaluation of Masonry Towers by Means of an Interactive and Adaptive 3D Kinematic Limit Analysis with Pre-assigned Failure Mechanisms

Simple model for predicting the vibration transmission of a squat masonry tower by base forced vibrations

Ambient Vibrations of Age-old Masonry Towers: Results of Long-term Dynamic Monitoring in the Historic Centre of Lucca

Machine learning‐based automatic operational modal analysis: A structural health monitoring application to masonry arch bridges

Structural modal identification and MCMC-based model updating by a Bayesian approach