Abstract:The fractured granite reservoir is well developed in Yongle block, which leads to severe drilling fluid loss-circulation. To solve the technical problem of both plugging and reservoir protection, on the basis of comprehensive literature research and laboratory tests at home and abroad, a polymer with an appropriate molecular weight, an organic crosslinking agent and other auxiliary materials were screened. In addition, a kind of high-temperature resistant loss-circulation plugging gel, which could be formed by timing and self-degradation, was developed. The high-strength gel loss-circulation system can be established by the development of a dynamic covalent borate ester bond crosslinking agent, which can crosslink with polyvinyl alcohol and xanthan gum. This system is of formidable strength and can be used for loss-circulation control in a fractured formation. The dynamic covalent borate ester bond tends to break due to the peroxide glue breaker under low pH levels, which can accelerate the degradation of the plugging gel into small molecules. The degradable temporary plugging material can ensure high-performance sealing and self-degradation capabilities of the fractured granite reservoir. The laboratory results showed that the high-performance degradable gel system was of adjustable gelling time, high gelling strength and high sealing capability. Its pressure-bearing could reach 5.8 MPa under 110 °C with 3.5 mm width of fractured granite core. Before crosslinking, the system also boasted promising thixotropy and rheology. The gel breaking time of the system was short, which could be completely broken with 6.1 h in 6% peroxide solution with pH of 4. The gelation time was related to the type of crosslinking agent, the amount of crosslinking agent and temperature. With the increase of temperature, the gelation time of gel system decreased. With the increase of the amount of the agent, the gelation time of gel system decreased. The gelation time was 105 min when using a 1% dynamic covalent borate ester bond crosslinking agent at 80 °C; the gelation time was 72 min when using a 1% dynamic covalent borate ester bond crosslinking agent at 110 °C; the gelation time was 71 min when using a 2% dynamic covalent borate ester bond crosslinking agent at 80 °C; the gelation time was 65 min when using a 2% dynamic covalent borate ester bond crosslinking agent at 110 °C; the gelation time was 72 min when using a 1% chromium crosslinking agent at 80 °C; the gelation time was 63 min when using a 2% chromium crosslinking agent at 80 °C; and the gel system had good reservoir protection performance. The permeability recovery rate was introduced to evaluate reservoir protection performance. The permeability recovery rate of using the dynamic covalent borate ester bond crosslinking agent was superior to that of using the chromium crosslinking agent. Using the dynamic covalent borate ester bond crosslinking agent, when the fracture width was 1.6 mm, the temperature was 80 °C and the soaking time was 8 h, the permeability recovery rate was 90.32%; when the fracture width was 0.75 mm, the temperature was 80 °C and the soaking time was 8 h, the permeability recovery rate was 84.53%. Using the chromium crosslinking agent, when the fracture width was 1.6 mm, the temperature was 80 °C and the soaking time was 12 h, the permeability recovery rate was 59.58%; when the fracture width was 0.75 mm, the temperature was 80 °C and the soaking time was 12 h, the permeability recovery rate was 45.65%. The viscosity of the residual solution was low and was helpful for reservoir protection during loss-circulation control under the fractured granite reservoir condition. The novel degradable temporary plugging material can solve the loss-circulation problem of the ultra-deepwater fractured granite reservoir. In addition, the material can pave the way for the exploration and development of a vast amount of hydrocarbon resources in the South China Sea.

A re-crosslinkable composite gel based on curdlan for lost circulation control

A Self-Healing Gel with an Organic-Inorganic Network Structure for Mitigating Circulation Loss

Low-Temperature Recrosslinkable Preformed Particle Gel as a Material for Lost Circulation Control

Strengthening the Hydrogel for Lost Circulation Control through In Situ Self-Assembled Nanocomposite Networks

A laboratory study of self-healing hydrophobic association gels used as lost circulation material

Application of Solvent-Assisted Dual-Network Hydrogel in Water-Based Drilling Fluid for Lost Circulation Treatment in Fractured Formation

Research Progress of High-Temperature Resistant Functional Gel Materials and Their Application in Oil and Gas Drilling

Synthesis and Performance of A Self Crosslinkable Acrylate Copolymer with High Compatibility for an Oil Well Cement Modifier

Experimental study of polymeric composite reinforced with carbon fiber for mud lost control application

Preparation and Performance of Resin-Gel–Rubber Expandable Lost Circulation Material Blend

The Development and Deployment of Degradable Temporary Plugging Material for Ultra-Deepwater Wells

Experimental study of a novel oil-based crosslinking-curing lost circulation material for shale gas well

Temperature- and Salt-Resistant Micro-Crosslinked Polyampholyte Gel as Fluid-Loss Additive for Water-Based Drilling Fluids

Development and Application of the Anti-High-Temperature Delayed Crosslinking Polymer as a Gel Plugging Additive for Drilling Fluid

Improved understanding nanocomposite gel working mechanisms: From laboratory investigation to wellbore plugging application

Polymer Gels Used in Oil-Gas Drilling and Production Engineering

Experimental Study on Physicochemical Properties of a Shear Thixotropic Polymer Gel for Lost Circulation Control

Water Management and Oil Recovery Improvement Performance of High-Strength Preformed Particle Gels in Fractured Conglomerate Reservoirs

Development and Performance Evaluation of a New Conformance Control Agent Gel

A Novel Branched Polymer Gel System with Delayed Gelation Property for Conformance Control

Unlocking the potentials of gel conformance for water shutoff in fractured reservoirs: Favorable attributes of the double network gel for enhancing oil recovery