Abstract:The impact loads have a significant influence on the dynamic strength and cracking behaviours of pre-cracked rocks, which plays a key role in the stability and safety of rock engineering. In this study, impact tests were performed by using a split Hopkinson pressure bar (SHPB) in conjunction with the high-speed photography technique. The dynamic strength of pre-cracked rocks under different strain rates and flaw angles was analysed, and the full-field cracking behaviours were elucidated by the evolution of strain localization zones based on the digital image correlation (DIC) analysis. By means of discrete element method (DEM), the impact tests were numerically reproduced to study the strength enhancement and the cracking processes. The results illustrate that the increase in the strain rate and flaw angle would lead to the increasing dynamic strength, the change of tensile and shear crack number is consistent with the strength variation, implying that the microcracking processes has a significant influence on the rate dependency of dynamic strength. As for the cracking behaviours, the strain localization zones would form around the flaw, and the crack branching phenomenon could be witnessed in dynamic tests. Furthermore, the complexity of cracking patterns becomes larger with the increasing strain rate, while the samples with the large flaw angle are difficult to generate strain localization zones and macroscopic cracks. By using a DIC-based method to analyse the crack initiation mechanisms, three types of stress-induced cracks were identified, i.e., mode I, II, and mixed mode I/II cracks. Among these cracks, the mode II cracks are the dominate type of cracks. Based on the mathematical analysis of Griffith model, the combined action of the tangential stress distribution and sliding deformation might be the reason for the crack initiation, and the rate-dependent strength might be induced by the increase of the maximum tangential stress regarding external stress.

Dynamic behavior of rock during its post failure stage in SHPB tests

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

Numerical simulation on rock failure under combined static and dynamic loading during SHPB tests

Dynamic Response and Failure Mechanism of Brittle Rocks Under Combined Compression-Shear Loading Experiments

Experimental and numerical investigation of crack propagation and dynamic properties of rock in SHPB indirect tension test

Numerical Simulation of the Rock SHPB Test with a Special Shape Striker Based on the Discrete Element Method

Experimental and Numerical Investigation on the Dynamic Failure Envelope and Cracking Mechanism of Precompressed Rock under Compression-Shear Loads

Dynamic Compression–Shear Response and Failure Criterion of Rocks with Hydrostatic Confining Pressure: An Experimental Investigation

Experimental study on the dynamic mechanical and progressive fracture behavior of multi-jointed rock mass under repetitive impact loading

Experimental and Numerical Study of Fracture Behavior of Rock-Like Material Specimens with Single Pre-Set Joint under Dynamic Loading

Experimental investigations of the dynamic mechanical properties and fracturing behavior of cracked rocks under dynamic loading

A modified triaxial split Hopkinson pressure bar (SHPB) system for quantifying the dynamic compressive response of porous rocks subjected to coupled hydraulic-mechanical loading

Dynamic mechanical properties of different types of rocks under impact loading

Experimental Study on the Effect of Brittleness on the Dynamic Mechanical Behaviors of the Coal Measures Sandstone

Dynamic strength and full-field cracking behaviours of pre-cracked rocks under impact loads

A Method for Testing Dynamic Tensile Strength and Elastic Modulus of Rock Materials Using SHPB

A Study of Dynamic Compressive Strength and Microscopic Mechanism on Water-Bearing Rock

Dynamic Brazilian Test of Rock Under Intermediate Strain Rate: Pendulum Hammer-Driven SHPB Test and Numerical Simulation

Mechanical properties and failure modes of CRCB specimen under impact loading

Dynamic mechanical responses and failure characteristics of fractured rocks with hydrostatic confining pressures: An experimental study