Abstract:Metal organic frameworks (MOFs) are of significant interest for photocatalysis using visible light, but they are typically limited by the instability and high recombination ratio of photoexcited pairs. Integrating MOFs into an inorganic semiconductor is one of the most widespread methods to promote their activity. In this study, a core-shell structured MOF@TiO2 (NH2-UiO-66@TiO2) was synthesized as an efficient photocatalyst for the degradation of toluene. Pristine NH2-UiO-66 was synthesized by a hydrothermal method as the core, which was then coated with an amorphous TiO2 shell. Compared with pristine NH2-UiO-66 and other samples prepared by the direct mixing of NH2-UiO-66 and TiO2, NH2- UiO-66@TiO2 exhibited a higher degradation rate of toluene. Using NH2- UiO-66@TiO2 as a catalyst, the degradation efficiency of toluene reached 76.7% within 3 h, which is 1.48 times higher than that of NH2-UiO-66. The degradation performance was also stable in four repeated reuse experiments, and the slight deactivation was reactivated after washing with ethanol. A series of characterization methods were used to determine the physicochemical properties of NH2-UiO-66@TiO2, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Using the measured physicochemical properties, the photocatalytic mechanism of NH2-UiO-66@TiO2 was explored. NH2-UiO-66 is an ideal photocatalyst, with visible-light response and a huge specific surface area (914.9 m(2).g(-1)), which is favorable for the utilization of sunlight as well as the absorption of pollutants in indoor air. In addition, a new interface formed between the two components (NH2-UiO-66 and TiO2), which efficiently broaden the light absorption area and enhanced the utilization of photogenerated species. The photogenerated holes and electrons could transfer through the interlayer as soon as they were formed. It is speculated that holes would transfer to the HOMO of NH2-UiO-66, and then combine with H2O molecules to form hydroxyl radicals (center dot OH). At the same time, more electrons tended to combine with oxygen molecules in the conduction band of TiO2 rather than recombine with holes. Consequently, the recombination rate of electrons and holes decreased, while the quantity of oxygen radicals and hydroxyl radicals increased. Toluene was efficiently oxidized by these two types of radicals. Owing to the outstanding properties mentioned above, the strategy of constructing NH2-UiO-66@TiO2 is considered to be an effective approach. This work may provide new insights into the design of core-shell structured MOF@photocatalysts for the photocatalytic degradation of indoor air pollutants.

A Visible Light-Driven α-MnO 2 /UiO-66-NH 2 S-Scheme Photocatalyst toward Ameliorated Oxy-TCH Degradation and H 2 Evolution

Enhanced hydrogen evolution via interlaced Ni 3 S 2 /MoS 2 heterojunction photocatalysts with efficient interfacial contact and broadband absorption

UiO-66-NH2 Metal-Organic Frameworks with Embedded MoS2 Nanoflakes for Visible-Light-Mediated H2 and O2 Evolution

A Hierarchical Hollow Pt@H-UiO-66-NH 2 /CdS Ternary Catalyst for Efficient Visible Light Prompted Photocatalysis

Strategic integration of MoO2 onto Mn0.5Cd0.5S/Cu2O p-n junction: Rational design with efficient charge transfer for boosting photocatalytic hydrogen production

Highly effective visible-photocatalytic hydrogen evolution and simultaneous organic pollutant degradation over an urchin-like oxygen-doped MoS2/ZnIn2S4 composite

A 3D C@TiO2 multishell nanoframe for simultaneous photothermal catalytic hydrogen generation and organic pollutant degradation

Core-Shell Structured NH2-UiO-66@TiO2 Photocatalyst for the Degradation of Toluene under Visible Light Irradiation

Non-noble metal ultrathin MoS2 nanosheets modified Mn0.2Cd0.8S heterostructures for efficient photocatalytic H2 evolution with visible light irradiation

Efficient Photocatalytic H2 Production Via Rational Design of Synergistic Spatially-Separated Dual Cocatalysts Modified Mn0.5Cd0.5S Photocatalyst under Visible Light Irradiation

Promoted Interfacial Charge Transport and Separation of Size-Uniform Zn, Ni-Doped CdS-1T/2H O-MoS 2 Nanoassemblies for Efficient Visible-Light Photocatalytic Water Splitting

TiO 2 NTs/MoS 2 -CdS Hybrid Photocathode for Visible Light-driven Photoelectrochemical Performance: Waste Water Remediation, Photoelectric Conversion and Hydrogen Generation

Construction of S-scheme p-n heterojunction between protonated g-C3N4 and α-MnS nanosphere for photocatalytic H2O2 production and in situ degradation of oxytetracycline

Efficient Electron Transfer across a ZnO-MoS2 -Reduced Graphene Oxide Heterojunction for Enhanced Sunlight-Driven Photocatalytic Hydrogen Evolution

Unique 1D Cd1-xZnxS@O-MoS2/NiOx Nanohybrids: Highly Efficient Visible-Light-Driven Photocatalytic Hydrogen Evolution Via Integrated Structural Regulation

Linker Engineering of Sandwich‐Structured Metal‐Organic Framework Composites for Optimized Photocatalytic H2 Production

MOCHAs: An Emerging Class of Materials for Photocatalytic H2 Production

MXene Schottky Functionalized Z-scheme Ternary Heterostructure for Enhanced Photocatalytic H 2 O 2 Production and H 2 Evolution

Fabrication of CuMnO2/XMoO4 (X=Ni, Co, Fe) heterostructure for hydrogen evolution under visible light irradaiation

Enhancement of visible light driven dye degradation and photocatalytic H<sub>2</sub> evolution over MoS<sub>2</sub> through combination with perylene diimide aggregates

Boosting Visible-Light Photocatalytic H-2 Evolution Via UiO-66-NH2 Octahedrons Decorated with Ultrasmall NiO Nanoparticles