Abstract:Three series of silicone modified polyurethane acrylate (SPUA) prepolymers were prepared from dicyclohexylmethane-4, 4′-diisocyanate (HMDI), PPG1000, triethylene glycol (TEG), 2-hydroxyethyl acrylate (HEA), and multi-hydroxyalkyl silicone (MI-III) with tris(trimethylsiloxy)silyl propyl side groups. Their structures were confirmed by 1H NMR, 13C NMR, and Fourier transformed infrared (FTIR) analysis, and SPUA films were obtained by UV curing. The properties of films were investigated by attenuated total reflection (ATR)-FTIR, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), water contact angle (WCA), thermogravimetric analysis (TGA), differential scanning calorimeter (DSC), water and hexane resistance, and tensile testing. The results showed that the structures and dosages of MI-III could influence the polymerization properties, surface properties, water and n-hexane resistance, and thermal and tensile properties of SPUA. For instance, the surface aggregation of tris(trimethylsiloxy)silyl propyl groups (even ~2.5 wt%) could endow SPUA films with less microphase separation, good hydrophobicity, lipophilicity, thermal stability, and mechanical properties. Interestingly, obvious regular winkles appeared on the surfaces of SPUAIII films, which are characterized by relatively high WCA values. However, relatively smooth were observed on the surfaces of SPUAIII films, which also exhibit lower water absorption ratio values. Furthermore, the ordinary cotton textiles would be transformed into hydrophobic and oleophilic textiles after treating with SPUA simply, and they were used in the oil/water separation study. Among them, consistent with water and hexane resistance analysis of SPUA films, SPUAII treated cotton textiles are characterized by relatively small liquid absorption capacity (LAC) values. Thus, phenyl groups and side-chain tris(trimethylsiloxy)silyl propyl groups are helpful to improve the hydrophobicity and lipophilicity of SPUA films. SPUAII-5 (even with 5 wt% MII) treated cotton textiles could efficiently separate the oil/water mixture, such as n-hexane, cyclohexane, or methylbenzene with water. Thus, this material has great potential in the application of hydrophobic treatment, oil/water separation, and industrial sewage emissions, among others.

Synthesis and characterization of bola polyhydroxy silicon quaternary ammonium and colorfastness for cotton fabric

Synthesis of Linear Piperazine/polyether Functional Polysiloxane and Its Modification of Surface Properties on Cotton Fabrics.

Synthesis, Film Morphology, and Performance on Cotton Substrates of Dodecyl/piperazine Functional Polysiloxane

Preparation of structural colors on cotton fabrics with hydrophobicity and high color fastness through chemical bonds between polyphenolic hydroxyl groups and polysiloxanes

Bioinspired Bola Polysiloxane for Wettability, Breathability, and Softness in Fabrics

Preparation and Characterization of Tris(trimethylsiloxy)silyl Modified Polyurethane Acrylates and Their Application in Textile Treatment

Fabrication and investigation of multifunctional fluorinated polysiloxane coatings with phenyl as bridging group

Enhanced hydrophobicity and UV resistance of cotton fabrics through the synergistic effect of raspberry-shaped colored nanoparticles and polymethylhydrosiloxane

Regulating the surface charge and reactivity of cellulose through quaternized modification to achieve salt-free reactive dyeing process

Preparation of Quaternary Ammonium Salt-Modified Chitosan Microspheres and Their Application in Dyeing Wastewater Treatment

Cotton fabrics modified with Si@ hyperbranched poly(amidoamine): their salt-free dyeing properties and thermal behaviors

Multifunctional bionic hydrophobic cotton fabrics modified with cationic nano-SiO 2 /polyurethane acrylate

Synthesis and characterization of comb structure polyether acrylate silicone softener for cotton fabrics

Preparation of Polyether Modified Silicones and Its Application in Comfortable Finishing of Cotton Fabric

Multifunctional coating of cotton fabric via the assembly of amino-quinone networks with polyamine biomacromolecules and dopamine quinone

Antibacterial cotton with endurance and skin affinity treated by P(DMDAAC-AGE-Si)/(ZnO@CQDs)

The effects of molecular tanglement between traditional polysiloxane softener and nonlinear polysiloxane-modified polyurethane to the hand feeling of textile

Synthesis of polysiloxane and its co-application with nano-SiO2 for antibacterial and hydrophobic cotton fabrics

Enhancement of natural dyeing properties and UV resistance of silk fibers modified by phenylboronic acid/hydroxypropyl‐β‐cyclodextrin functionalized Fe 3 O 4 particle

Synthesis of 2, 3-dibromo-succinic anhydride and application on cotton, polyester and polyester/cotton blended fabric

Use of quaternary ammonium salt as a dye fixing agent and antimicrobial agent in sustainable, single-step single-bath dyeing and finishing