Abstract:Biopolymer-based blends of solid electrolytes capable of conducting sodium ions were prepared via solution casting by incorporating sodium carboxymethyl cellulose (NaCMC) and polyvinyl alcohol (PVA) with varying concentrations of sodium perchlorate monohydrate (NaClO 4 .H 2 O) was used as the dopant. The prepared electrolytes were characterized to reveal their structural, vibrational, electrical, and electrochemical properties that make them promising as solid polymer electrolytes (SPEs). X-ray diffraction (XRD) analysis showed that the amorphous nature of the sample increased with the addition of NaClO 4 .H 2 O salt concentrations of up to 30 wt.%. The complexation between the polymers and salt was confirmed by Fourier-Transform Infrared (FTIR) analysis. The SPE exhibited an optimal ionic conductivity of (1.90±0.05) ×10 −5 S cm −1 , which is three orders higher than that of the pristine polymer blend with (5.31±0.61) ×10 −8 S cm −1 , as determined by electrochemical impedance spectroscopy (EIS) analysis. Scaling studies conducted based on AC conductivity and tangent loss revealed that these measurements could be represented by a single master curve, which suggests that the optimal sample adheres to the time-temperature superposition principle (TTSP). The temperature dependence of Jonscher's exponent indicates that the conduction mechanism can be effectively represented by the Quantum Mechanical Tunneling model (QMT). Both transference number measurement (TNM) and linear sweep voltammetry (LSV) analyses validated the electrolyte's suitability for energy device applications by demonstrating its high ion transference number and electrochemical potential window of 3.93 V. The optimized SPE film was subsequently utilized in an electrochemical double-layer capacitor (EDLC) device to evaluate its performance as both an electrolyte and separator. The supercapacitor exhibited an impressive energy density of 15.18 Wh kg −1 and a power density of 4512.5 W kg −1 , along with remarkable stability in terms of cycle life.

Improving supercapacitor performance with novel potato starch-PVA solid polymer electrolyte blend modified by sodium perchlorate-glycerol additives

Compositional dependence of electrochemical properties in biopolymer blend-based solid electrolytes doped with sodium perchlorate for EDLC applications

Insight into structure-property correlations in plasticized sodium carboxymethyl cellulose/pectin blend-based polymer electrolyte for EDLC application

Environmentally friendly plasticized electrolyte based on chitosan (CS): Potato starch (PS) polymers for EDLC application: Steps toward the greener energy storage devices derived from biopolymers

High Performance Electrospun Li+-functionalized Sulfonated Poly(ether Ether Ketone)/pva Based Nanocomposite Gel Polymer Electrolyte for Solid-State Electric Double Layer Capacitors.

The ionic conductivity and electrochemical performance of Alginate-PVA based polymer electrolyte with Li + charge carriers for supercapacitor

Insight into the Effect of Glycerol on Dielectric Relaxation and Transport Properties of Potassium-Ion-Conducting Solid Biopolymer Electrolytes for Application in Solid-State Electrochemical Double-Layer Capacitor

A Polymer Blend Electrolyte Based on CS with Enhanced Ion Transport and Electrochemical Properties for Electrical Double Layer Capacitor Applications

Synthesis of PVA/corn starch hydrogel polymer electrolytes for supercapacitors

Preparation and characterization of 1-ethyl-3-methylimidazolium chloride–based gel polymer electrolyte in electrochemical double-layer capacitors

The Development of Chitosan-Maltodextrin Polymer Electrolyte with the Addition of Ionic Liquid for Electrochemical Double Layer Capacitor (EDLC) Application

Structural, Impedance and Electrochemical Characteristics of Electrical Double Layer Capacitor Devices Based on Chitosan: Dextran Biopolymer Blend Electrolytes

Electric double-layer capacitors with tea waste derived activated carbon electrodes and plastic crystal based flexible gel polymer electrolytes

Excellent film-forming, ion-conductive, zwitterionic graft copolymer electrolytes for solid-state supercapacitors

Cross-Linking of Polymer and Ionic Liquid As High-Performance Gel Electrolyte for Flexible Solid-State Supercapacitors

Characterizing sodium-conducting biopolymer blend electrolytes with glycerol plasticizer for EDLC application

A Low-Cost PAN-b-PEG-b-PAN/TEABF4 Gel Electrolyte for Flexible All-Solid-state Supercapacitors

High Performance Poly(vinyl alcohol)-Based Li-Ion Conducting Gel Polymer Electrolyte Films for Electric Double-Layer Capacitors

Proton conducting flexible solid blend polymer electrolytes based on poly(ethylene oxide) and poly(vinylidene fluoride-co-hexa fluoropropylene) for electric double-layer capacitor applications

Flexible electric double-layer capacitors fabricated with micro-/mesoporous carbon electrodes and plastic crystal incorporated gel polymer electrolytes containing room temperature ionic liquids

Characteristics of a Plasticized PVA-Based Polymer Electrolyte Membrane and H+ Conductor for an Electrical Double-Layer Capacitor: Structural, Morphological, and Ion Transport Properties