Abstract:The reaction kinetics and efficiency in any catalytic process is controlled by the adsorption and desorption of reactant and intermediates on the surface of catalyst. As a consequence, the surface properties, composition and geometry of the catalyst dictates the mechanism of reactions. The surface electronic structure is modulated by variations in surface and subsurface atomic configurations, e.g., ordering and surface segregation, which in turn can vividly affects catalytic properties. 1,2 A great deal of efforts are being devoted to develop efficient heterogenous catalyst by critically controlling the surface structure and chemistry. Here, I would like to present results on two different strategies for controlling the surface composition in ultrathin bimetallic AuPd nanowires. Au nanowire template-based method was used to grow AuPd wires by gradually increasing the amount of Pd. 3 Percentage of composition of Au and Pd in AuPd nanowires gave either alloy nanowires with Au-rich compositions or core-shell structure at higher Pd compositions with Au-rich core and Pd-rich shell. Surface morphology of alloyed nanowires were induced through segregation of Pd to the surface by annealing under controlled CO atmosphere. High resolution microscopic imaging was possible due to the fact of substantial difference in the atomic number between Au and Pd. Electrocatalytic methanol oxidation reaction (MOR) in alkaline medium is important for energy conversion and was selected to study the catalytic activity of AuPd nanowires. A nearly monotonic increase of MOR potential was observed with increase in Pd content. Interestingly, a typical volcano type behavior of the specific activity was observed with different composition and with 40 and 50% Pd samples showed the optimum values in terms of current, potential and I f /I b values. Owing to a higher Pd content of CO-annealed nanowires, a lowering of potential was observed though the specific activity was maintained. These findings provide clear strategies to independently control the reaction potential and the activities of nanocatalysts with smaller amounts of the expensive active metal. The compositional effects on the electronic structure of the AuPd nanowires (catalyst surface) as well as binding energy of intermediates involved in the MOR was investigated using DFT calculations. d-band center analysis was employed to check interaction of CO* which a major intermediate of MOR with the catalyst surface. The theoretical investigation align well with the experimental results where it was found that the MOR potential increases with increasing amount of Pd and for the Au rich case the reaction does not reach up to CO 2 but yields HCHO as a product at lower potentials. From our experimental finding it was evident that it is possible to lower the MOR potential to attain comparable or better activity through enrichment with the precious metal on the surface while essentially dropping the real quantity used. References: (1) Zhang, N.; Shao, Q.; Xiao, X.; Huang, X. Advanced Catalysts Derived from Composition-Segregated Platinum–Nickel Nanostructures: New Opportunities and Challenges. Adv. Funct. Mater. 2019, 29 (13), 1–28. (2) Ruban, A. V.; Skriver, H. L.; Nørskov, J. K. Surface Segregation Energies in Transition-Metal Alloys. Phys. Rev. B - Condens. Matter Mater. Phys. 1999, 59 (24), 15990–16000. (3) Chatterjee, D.; Shetty, S.; Müller-Caspary, K.; Grieb, T.; Krause, F. F.; Schowalter, M.; Rosenauer, A.; Ravishankar, N. Ultrathin Au-Alloy Nanowires at the Liquid–Liquid Interface. Nano Letters 2018, 18 (3), 1903–1907. Figure 1

Porous PdAg alloy nanostructures with a concave surface for efficient electrocatalytic methanol oxidation

Hollow PtPd Nanorods with Mesoporous Shells As an Efficient Electrocatalyst for the Methanol-Oxidation Reaction.

Highly Active Nanoporous Pt-based Alloy As Anode and Cathode Catalyst for Direct Methanol Fuel Cells

PdCu Alloy Nanodendrites with Tunable Composition As Highly Active Electrocatalysts for Methanol Oxidation

Facile synthesis of Pd-Pt alloy concave nanocubes with high-index facets as electrocatalysts for methanol oxidation

Tuning Surface Structure of Pd3Pb/PtnPb Nanocrystals for Boosting the Methanol Oxidation Reaction

Facile Synthesis of Ternary PtPdCu Alloy Hexapods As Highly Efficient Electrocatalysts for Methanol Oxidation

Facile Synthesis of PtCu3alloy Hexapods and Hollow Nanoframes As Highly Active Electrocatalysts for Methanol Oxidation

Engineering Porosity into Trimetallic PtPdNi Nanospheres for Enhanced Electrocatalytic Oxygen Reduction Activity

Stepwise synthesis of "Pt-on-PdAg" hybrid trigonal/hexagonal nanocrystals for efficient electroxidation of methanol: Interface engineering for trimetallic electrocatalyst

Controlled synthesis of Pd–Ag nanowire networks with high-density defects as highly efficient electrocatalysts for methanol oxidation reaction

Synthesis of Ultrathin and Composition-Tunable PdPt Porous Nanowires with Enhanced Electrocatalytic Performance

2H‐au Nanosheet‐Templated Growth of PdFe for Electrocatalytic Methanol Oxidation

Ultrafine PdAgAu alloy nanowires for ethanol oxidation electrocatalysis

Seeded growth of PdPtAg-on-Au heterogeneous nanoplates for efficient methanol oxidation Reaction: Interface engineering in quaternary metallic electrocatalysts

Modulating the Electronic Structure of PdCoP Nanonetworks Alloy for Efficient Electro-Catalysis of Methanol Oxidation

Hierarchical defective palladium-silver alloy nanosheets for ethanol electrooxidation

Sustainable solid-state synthesis of uniformly distributed PdAg alloy nanoparticles for electrocatalytic hydrogen oxidation and evolution

Enhancing electrocatalytic methanol oxidation of Pd-Ir nanoalloy through electron-rich catalytic interface induced by incorporating phosphorus

One-pot Fabrication of Single-Crystalline Octahedral Pd-Pt Nanocrystals with Enhanced Electrocatalytic Activity for Methanol Oxidation

Tuning Catalytic Activity in Ultrathin Bimetallic Nanowires Via Surface Segregation: Application in Electrochemical Methanol Oxidation