Abstract:Metal additive manufacturing (AM) processes, such as laser powder bed fusion (L-PBF), can yield high-value parts with unique geometries and features, substantially reducing costs and enhancing performance. However, the material properties from L-PBF processes are highly sensitive to the laser processing conditions and the resulting dynamic temperature fields around the melt pool. In this study, we develop a methodology to measure thermal gradients, cooling rates, and solidification velocities during solidification of refractory alloy C103 using in situ high-speed infrared (IR) imaging with a high frame rate of approximately 15,000 frames per second (fps). Radiation intensity maps are converted to temperature maps by integrating thermal radiation over the wavelength range of the camera detector while also considering signal attenuation caused by optical parts. Using a simple method that assigns the liquidus temperature to the melt pool boundary identified ex situ, a scaling relationship between temperature and the IR signal was obtained. The spatial temperature gradients (dT/dx), heating/cooling rates (dT/dt), and solidification velocities (R) are resolved with sufficient temporal resolution under various laser processing conditions, and the resulting microstructures are analyzed, revealing epitaxial growth and nucleated grain growth. Thermal data shows that a decreasing temperature gradient and increasing solidification velocity from the edge to the center of the melt pool can induce a transition from epitaxial to equiaxed grain morphology, consistent with the previously reported columnar to equiaxed transition (CET) trend. The methodology presented can reduce the uncertainty and variability in AM and guide microstructure control during AM of metallic alloys.

Unveiling gas–liquid metal reactions in metal additive manufacturing: High-fidelity modeling validated with experiments

Influence of oxygen content on melt pool dynamics in metal additive manufacturing: High-fidelity modeling with experimental validation

Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing

Innovative Liquid Metal Strategy for Real-time Thermal Control in Additive Manufacturing

Study of the Mechanism of a Stable Deposited Height During GMAW-Based Additive Manufacturing

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

Metal Vaporization and Its Influence During Laser Powder Bed Fusion Process

On the nanoscale oxide dispersion via in-situ atmospheric oxidation during laser powder bed fusion

A Review of the Vaporization Behavior of Some Metal Elements in the LPBF Process

Phase change and solute mixing in multicomponent metal additive manufacturing: A new numerical approach

Switching of controlling mechanisms during the rapid solidification of a melt pool in additive manufacturing

Resolving thermal gradients and solidification velocities during laser melting of a refractory alloy

Quantification of Interdependent Dynamics during Laser Additive Manufacturing Using X‐Ray Imaging Informed Multi‐Physics and Multiphase Simulation

Numerical Analysis of Fused-Coating Metal Additive Manufacturing

Convective Flow Redistribution of Oxygen by Laser Melting of a Zr-Based Amorphous Alloy

Understanding Melt Pool Behavior of 316L Stainless Steel in Laser Powder Bed Fusion Additive Manufacturing

Numerical Simulation of Gas Atomization and Powder Flowability for Metallic Additive Manufacturing

A Novel High-Efficiency Methodology for Metal Additive Manufacturing

Evolution of molten pool during selective laser melting of Ti–6Al–4V

A numerical model-based deposition strategy for heat input regulation during plasma arc-based additive manufacturing

Dispersion of reinforcing micro-particles in the powder bed fusion additive manufacturing of metal matrix composites