Abstract:Anisotropic heat transfer in nanosecond pulse laser processing of CFRP. Nanosecond pulsed laser processing is an efficient method of processing carbon fiber reinforced plastic(CFRP), which is widely used in the manufacturing field of aviation, medical, and auto industries. The anisotropic heat transfer of carbon fiber is a key factor degrading the surface integrity of laser processing CFRP. So it is urgent to explore the significant mechanism of anisotropic heat transfer of laser interacting with CFRP. A novel numerical model considering anisotropic heat transfer was established to analyze heat transfer and thermal damage of CFRP laser machining. By comparison of simulation and experiments, the average error of ablation depth and width ranges from 4.71% to 15.09%, so the model could precisely simulate the CFRP laser machining. It demonstrates that the heat conductivity along the axial carbon fiber is higher than that along the radial, resulting in an elliptical ablation morphology. And when the laser scanning direction is parallel to the direction of the carbon fiber, deeper and narrower microgrooves can be obtained. In addition, laser processing at the edge of the CFRP plate causes serious heat accumulation, leading to severe thermal damage. The simulation and experiments were conducted to explore the effect of parameters including laser energy, scanning speed, and scanning space on the depth and width of laser ablation. A deeper micro‐channel with a smooth machined surface and small thermal damage was obtained when laser energy E = 0.275 mJ, scanning speed v = 630 mm/s, and scanning space h = 21 μm.

Numerical simulation of paint stripping on CFRP by pulsed laser

Towards low-temperature laser paint stripping by photochemical mechanism on CFRP substrates

Shape evolution and characteristics of carbon fiber reinforced polymer surface in laser ablation

Comparative Study of Infrared Nanosecond Laser Surface Paint Removal for Carbon Fiber Reinforced Polymer and Glass Fiber Reinforced Polymer

Experimental and numerical simulation analysis of laser paint removal of aluminum alloy

Simulation and Experimental Study on Continuous Wave Fiber Laser Removal of Epoxy Resin Paint Film on the Surface of 6061 Aluminum Alloy

Numerical simulation and experimental study of cleaning mechanisms in multipulse laser paint removal of acrylic polyurethane composite paint layers on aluminum alloy

Investigation on ablative process of CFRP laminates under laser irradiations

Thermodynamic simulation, surface morphology and bending property of carbon fiber reinforced polymer composite material subjected to laser cleaning

Experimental Investigation on Ablation Behaviors of CFRP Laminates in an Atmospheric Environment Irradiated by Continuous Wave Laser

Study on anisotropic heat transfer and thermal damage in nanosecond pulsed laser processing of CFRP

Simulation and Experimental Study of Nanosecond Pulse Laser Removal of Epoxy Paint on 6061 Aluminum Alloy Surface

Laser cleaning performance and mechanism in stripping of Polyacrylate resin paint

Investigation on heat transfer and ablation mechanism of CFRP by different laser scanning directions

Study of experimental and numerical simulation of high-energy laser processing on carbon fiber reinforced polymer

Modeling continuous laser ablation of glass fiber-reinforced epoxy resin plate with two-dimensional finite element

Effect of laser cleaning on adhesive properties of carbon fiber composite materials

Simulation of nanosecond laser cleaning the paint based on the thermal stress

Experimental probe into the femtosecond laser ablation thresholds in carbon fiber reinforced polymer and assessment of the measurement theories

Formation and effect of rough surface in pulsed laser removal of thick paint layer on 2024 aluminum

Investigation on dynamic behavior of laser paint removal based on high-speed shadow imaging technology