Abstract:Previous studies suggest that selective adsorption of additive molecules onto certain zinc facets enhances zinc anode's performance by promoting (002)‐textured zinc deposits. Yet, it is unclear why the (002) plane, despite its lower surface energy, is not naturally dominant during electrodeposition. This research reveals that the (002)‐textured zinc deposition is influenced not only by thermodynamic equilibrium but also by interface dynamics. Facilitating (002)‐textured zinc growth is crucial for achieving dendrite‐free zinc deposition in zinc‐ion batteries. Electrolyte engineering holds promise in directing zinc electrodeposition toward this desired orientation. However, despite the (002) plane's lower surface energy compared to other facets, it remains unclear why this plane does not dominate zinc crystal faces during electrodeposition under normal conditions. This knowledge gap underscores the need to better understand zinc electrodeposition behaviors and the influence of electrolyte compositions on its crystallographic texture. This study explores different tetraazamacrocycle derivatives as electrolyte additives. It reveals that achieving (002)‐textured zinc deposition is not solely dictated by thermodynamic equilibrium but also significantly influenced by interface dynamics. In typical ZnSO4 electrolytes, imbalanced kinetics among reduction, ion diffusion, and adatom diffusion processes lead to electroconvection and disorderly zinc accumulation, hindering proper zinc growth. In contrast, introducing specific tetraazamacrocycle derivative in the electrolyte regulates reduction rate, enhances limiting current density, and expedites adatom diffusion, mitigating hydrodynamic instability and dendrite growth. This regulation restores the thermodynamically favorable flat (002)‐textured zinc deposition, extending the zinc anode's lifespan to 1800 h at 5 mA cm−2 and 5 mAh cm−2, enabling the fabrication of a high‐performance zinc ion hybrid capacitor prototype capable of stable operation for 40 000 cycles.

Emulating "Curvature‐Enhanced Adsorbate Coverage" for Superconformal and Orientated Zn Electrodeposition in Zinc‐ion‐Batteries

A Homogeneous Plating/stripping Mode with Fine Grains for Highly Reversible Zn Anodes

In Situ Nafion-nanofilm Oriented (002) Zn Electrodeposition for Long-Term Zinc-Ion Batteries.

Epitaxial Deposition of Zn (002) for Stable Zinc Metal Anodes

Outer Helmholtz Plane Regulation and In Situ Zn Surface Reconstruction for Highly Reversible Zn Anodes

Highly Reversible Zn Anode Design Through Oriented ZnO(002) Facets

Building Near‐Unity Stacked (002) Texture for High‐Stable Zinc Anode

Adjusting Interface Dynamics: A New Insight into the Role of Electrolyte Additive in Facilitating Highly Reversible (002)‐Textured Zinc Anode at High Current and Areal Densities

Crystallographic Reorientation Induced by Gradient Solid‐Electrolyte Interphase for Highly Stable Zinc Anode

Ultra‐Stable Zinc Metal Anodes Enabled by Uniform Zn Deposition on A Preferential Crystal Plane

Zincophilic Ion-Conductive Layer with Desolvation Effect and Oriented Deposition Behavior Achieving Superior Reversibility of Zn Metal Anode

Mass Transfer Limitation within Molecular Crowding Electrolyte Reorienting (100) and (101) Texture for Dendrite‐Free Zinc Metal Batteries

Promoting Preferential Zn (002) Deposition with a Low-Concentration Electrolyte Additive for Highly Reversible Zn-Ion Batteries

Effective Orientation Control of the Zinc Anode for High-Performance Aqueous Zinc-Ion Batteries: A Key Approach to Address Dendrite Growth and Side Reactions

Highly enhanced reversibility of a Zn anode by in-situ texturing

Planar Deposition via In Situ Conversion Engineering for Dendrite‐Free Zinc Batteries

A Zincophilic Ion-Conductive Layer with the Desolvation Effect and Oriented Deposition Behavior Achieving Superior Reversibility of Zn Metal Anodes

Stable interphase chemistry of textured Zn anode for rechargeable aqueous batteries

Customizing H2O‐Poor Electric Double Layer and Boosting Texture Exposure of Zn (101) Plane towards Super‐High Areal Capacity Zinc Metal Batteries

Realizing Highly Reversible Zinc Anode via Controlled‐current Pre‐deposition

Facilitating Oriented Dense Deposition: Utilizing Crystal Plane End-Capping Reagent to Construct Dendrite-Free and Highly Corrosion-Resistant (100) Crystal Plane Zinc Anode