Abstract:Magnesium nitrate hexahydrate is a preferred material in building heat applications with a moderate temperature (89 °C), suitable latent heat (130~150 kJ·kg−1), and low cost (1000~2000 CNY/Ton). However, as the low heat source temperature in the engineering application (usually less than 150 °C), the temperature difference driving the phase transition of the phase change materials is small, resulting in the slower dynamic process of heat storage. Aiming at this problem, this paper proposes a new method to prepare solar-driven composite phase change materials by combining photo-thermal materials with salt hydrate phase change materials. Solar-driven composite phase change materials can absorb photons and convert them into heat, most of which is stored in the phase change materials as the form of latent heat. The energy driving phase transition of phase change materials came from the solar and the other heat source simultaneously. Herein, a novel solar-driven composite phase change material containing magnesium nitrate hexahydrate, carboxymethyl cellulose, and graphene is prepared successfully and its absorption capacity and photo-thermal storage performance are measured systematically in the full spectrum. Compared with pure magnesium nitrate hexahydrate, the absorption capacity of the composites with graphene can be increased to 79.12% from 46.54%. The photo-thermal conversion and storage efficiency of composite phase change materials as high as 69.73%, and for the pure magnesium nitrate hexahydrate, it is not enough to absorb much heat to make a phase transition due to low absorption capacity. Also, the thermal conductivity of composite phase change materials with 5 wt% of graphene was significantly enhanced by 191.18% (0.99 W∙m−1∙K−1), compared with 0.34 W∙m−1∙K−1 of one for composites without graphene. Although with graphene mass fractions increases, the latent heat slightly decreases, an acceptable latent heat value (122.8 kJ∙kg−1) is obtained. The prepared sample has excellent cycling performance, which is important in applications. Therefore, this novel solar-driven composite phase change material could be potential as a solar heat storage material in engineering applications due to its good photo-thermal conversion and storage performance.

Visible light driven low temperature photoactive energy storage materials for high rate thermal output system

A Low-Temperature Heat Output Photoactive Material-Based High-Performance Thermal Energy Storage Closed System

A high power density photoactive thermal energy storage material for rapid heat release at low temperatures

Fabrication of Novel Slurry Containing Graphene Oxide-Modified Microencapsulated Phase Change Material for Direct Absorption Solar Collector

High-energy and light-actuated phase change composite for solar energy storage and heat release

Co-harvesting Solar Energy with Ambient Heat and On-Demand Release of Thermal Energy below 0 Oc Through Visible-Light-Controlled Photochemical Phase Transitions of Azopyrazoles

Photochemical Phase Transitions Enable Coharvesting of Photon Energy and Ambient Heat for Energetic Molecular Solar Thermal Batteries That Upgrade Thermal Energy

Highly efficient solar-thermal storage coating based on phosphorene encapsulated phase change materials

An azobenzene-based photothermal energy storage system for co-harvesting photon energy and low-grade ambient heat via a photoinduced crystal-to-liquid transition

3D porous copper foam-based shape-stabilized composite phase change materials for high photothermal conversion, thermal conductivity and storage

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

Alkyl-grafted azobenzene molecules for photo-induced heat storage and release via integration function of phase change and photoisomerization

Visible‐Light‐Sensitive Photoliquefiable Arylazoisoxazoles for the Solar Energy Conversion, Storage and Controlled‐Release of Heat at Room Temperature or Lower Temperatures

Highly conductive phase change composites enabled by vertically-aligned reticulated graphite nanoplatelets for high-temperature solar photo/electro-thermal energy conversion, harvesting and storage

Vertical orientation graphene/MXene hybrid phase change materials with anisotropic properties, high enthalpy, and photothermal conversion

Preparation of flexible photo-responsive film based on novel photo-liquefiable azobenzene derivative for solar thermal fuel application

Development of lithium hydroxide-metal organic framework-derived porous carbon composite materials for efficient low temperature thermal energy storage

Photoliquefiable Azobenzene Surfactants toward Solar Thermal Fuels that Upgrade Photon Energy Storage via Molecular Design

Three-Dimensional Interpenetrating Network Phase-Change Composites with High Photothermal Conversion and Rapid Heat Storage and Release

An experimental study in full spectra of solar-driven magnesium nitrate hexahydrate/graphene composite phase change materials for solar thermal storage applications

A Helical Polycycle Molecular Semiconductor for Durable and Efficient Perovskite Solar Cells