Abstract:AGS technology has been studied for decades, and many successful experimental research approaches and full-scale processes have been proposed. However, a precise, comprehensive understanding of the granulation mechanism remains lacking. In this study, sequencing batch reactors were partially inoculated with (S1) or without AGS (S2) to explore aerobic granulation performance in simulative low-strength wastewater. The COD, NH4+-N removal efficiency and SND rate were 91.61%, 92.47%, and 84%, respectively, in S1 and higher in this reactor than in S2 (86.76%, 85.21%, and 75%, respectively), indicating the superiority of partial inoculation with AGS. The ratios of P release/NaAc uptake both increased to nearly 0.250, revealing the robust capacity for phosphorus enrichment. Moreover, the increment of EPS content in S2 (31.73 mg/g MLSS) was 47% higher than that in S1 (21.54 mg/g MLSS) and was contributed mainly by PS, which increased to 30.17 mg/g MLSS (S2). These findings indicated active sludge for granulation was more sensitive to the ambient conditions, and secrete greater PS. FTIR and 3D-EEM revealed that numerous hydroxyl groups were assembled within EPS upon granulation, and humic acid-like substances first increased and then decreased over the operation, implying robust cohesion and positive microbial activities. Microbial community analysis demonstrated that Paracoccus and unclassified_Cytophagales dominated in both reactors, accounting for 29.42% and 10.87%, respectively, of the community in S1 and 26.62% and 18.54%, respectively, of the community in S2. Metabolic pathway analysis revealed enhancement of microbial metabolism, cellular processes, and signaling pathways, such as methanol oxidation, methylotrophy, and nitrite denitrification pathways.

Impact of stepwisely reducing settling time on the formation and performance of aerobic granular sludge

A Case for Aerobic Sludge Granulation: from Pilot to Full Scale

Rapid aerobic sludge granulation in an integrated oxidation ditch with two-zone clarifiers.

Rapid cultivation of aerobic granular sludge and analysis of sludge characteristics

Enhanced aerobic granulation by inoculating dewatered activated sludge under short settling time in a sequencing batch reactor

Effect of settling time and organic loading rates on aerobic granulation processes treating high strength wastewater

Essential roles of eDNA and AI-2 in aerobic granulation in sequencing batch reactors operated at different settling times

[Effects of Settling Time and Biofilm on the Cultivation of Nitrifying Aerobic Granular Sludge].

Improving aerobic sludge granulation in sequential batch reactor by natural drying: Effluent sludge recovery and feeding back into reactor

Effects of Wash-Out Dynamics on Nitrifying Bacteria in Aerobic Granular Sludge During Start-Up at Gradually Decreased Settling Time

Reviewing bottlenecks in aerobic granular sludge technology: Slow granulation and low granular stability

Effect of different feeding strategies on performance of aerobic granular sludge: From perspective of extracellular polymeric substances and microorganisms

Rapid cultivation of aerobic granular sludge in a pilot scale sequencing batch reactor

Optimization of selective sludge discharge mode for enhancing the stability of aerobic granular sludge process

Understanding of aerobic sludge granulation enhanced by sludge retention time in the aspect of quorum sensing.

Promoting the Granulation Process of Aerobic Sludge Via a Sustainable Strategy of Effluent Reflux in View of AHLs-mediated Quorum Sensing

Impact of Extracellular Polymeric Substances on the Settlement Ability of Aerobic Granular Sludge

Cultivation of aerobic granular sludge in sequencing batch reactor with short cycle

Long-term aerobic granular sludge stability through anaerobic slow feeding, fixed feast-famine period ratio, and fixed SRT

Inoculation of aerobic granular sludge to achieve granulation under high dissolved oxygen and the associated mechanisms