Abstract:The biggest obstacle to the widespread implementation of polymer electrolyte membrane fuel cells (PEMFCs) is their cost, primarily due to the use of platinum catalysts. The high intrinsic catalyst activity exhibited on a rotating disk electrode (RDE) is rarely realized in a membrane electrode assembly (MEA), which is a long-standing challenge for PEMFCs and a cause of low catalyst utilization. To translate the high RDE performance of a catalyst into a MEA, the design of an ideal ionomer/catalyst interface is proposed: a thin, conformal ionomer film covers the maximum surface of a Pt nanoparticle and thus simultaneously maximizes catalyst utilization, ( i.e. , high mass activity and electrochemically active surface area) and O 2 diffusion rate ( i.e. , high current density performance) without compromising proton conduction. Building such an interface is a long-standing challenge due to the lack of interaction between the ionomer and catalyst particles, resulting in large ionomer agglomerates and inhomogeneous ionomer coverage over the catalyst nanoparticle, with consequent poor fuel cell performance. In this work, this ionomer/catalyst interface has been engineered, utilizing the electrostatic attraction between positively charged catalyst and negatively charged ionomer particles in a catalyst ink and preserved in a solid catalyst layer. As a result, this interface leads to previously unachieved proton exchange membrane fuel cell performance in terms of both catalyst utilization (75% vs. 45%) and peak/rated power density ( i.e. , 1.430/0.930 W cm −2 , H 2 /air, cathode Pt loading: 0.1 mg Pt cm −2 ) for pure Pt catalysts, even better than those of Pt alloy catalysts. This work demonstrates the formation of an interface in the liquid phase (using ultra-small-angle X-ray scattering in combination with cryo-TEM, isothermal–titration–calorimetry) and the preservation of the interface in the solid catalyst layer (using TEM) and estimates the effective coverage and thickness of the ionomer film (using limiting current density, RDE and fuel cell performance).

Ir-Pt/C composite with high metal loading as a high-performance anti-reversal anode catalyst for proton exchange membrane fuel cells

Engineered metal coverage of anode catalyst layer enhancing cell reversal tolerance for proton exchange membrane fuel cells

IrO X Supported onto Niobium-Doped Titanium Dioxide as an Anode Reversal Tolerant Electrocatalyst for Proton Exchange Membrane Fuel Cells

Bifunctional Electrocatalyst Materials for Improved Cell Reversal Tolerance in PEM Fuel Cell

Thickness effects of anode catalyst layer on reversal tolerant performance in proton exchange membrane fuel cell

Introducing Catalyst in Alkaline Membrane for Improved Performance Direct Borohydride Fuel Cells

Constructing highly durable reversal-tolerant anodes via integrating high-surface-area Ti 4 O 7 supported Pt and Ir@IrO x for proton exchange membrane fuel cells

Study on Anode Catalyst Layer Configuration for Proton Exchange Membrane Fuel Cell with Enhanced Reversal Tolerance and Polarization Performance

Irreducible IrO2 Anode Co-Catalysts for PEM Fuel Cell Voltage Reversal Mitigation and Their Stability Under Start-Up/Shut-Down Conditions

High Performance Bifunctional Pt/C-RuO 2 /Ti 3 C 2 T x Catalyst for Reversal-Tolerant Anodes of Polymer Electrolyte Membrane Fuel Cells

A Universal Strategy to Enhance Polarization Performance and Anode Reversal Tolerance by Polyaniline‐Coated Carbon Support for Proton Exchange Membrane Fuel Cells

Influence of mixing time on a reversal tolerant anode measured ex situ for a PEMFC

Phosphorus-Doped Pt-Ir Nanoalloy for the Improved Voltage Reversal Durability Anode in H2/O2 Fuel Cells

Cobalt-doped IrRu Bifunctional Nanocrystals for Reversal-Tolerant Anodes in Proton-Exchange Membrane Fuel Cells

Ionomer Cross-Linking Immobilization of Catalyst Nanoparticles for High Performance Alkaline Membrane Fuel Cells

A Comparative Study on the Activity and Stability of Iridium-Based Co-Catalysts for Cell Reversal Tolerant PEMFC Anodes

Composite Anode for PEM Water Electrolyzers: Lowering Iridium Loadings and Reducing Material Costs with a Conductive Additive

Hydrogenated TiO2 Carbon Support for PtRu Anode Catalyst in High‐Performance Anion‐Exchange Membrane Fuel Cells

Study of Failure Mechanisms of the Reversal Tolerant Fuel Cell Anode Via Novel In-Situ Measurements

Highly dispersed ultrafine PtCo alloy nanoparticles on unique composite carbon supports for proton exchange membrane fuel cells

Unraveling the core of fuel cell performance: engineering the ionomer/catalyst interface