Abstract:Oil and gas exploration increasingly requires high-resolution imaging of small, irregularly shaped, and highly heterogeneous well-side complex and abnormal geo-bodies. Conventional borehole acoustic imaging is often unable to accurately obtain the position and azimuth of small-scale abnormal geo-bodies. This study presents an inversion method that uses scattered waves for borehole 3D acoustic imaging and an implementation scheme that combines plane and spherical scanning imaging. The finite-difference time-domain method was used to simulate the acoustic fields for borehole azimuthal acoustic imaging of one and two caves next to a well. The proposed inversion method of 3D spatial scanning based on multi-mode wave information was validated through numerical simulations investigating the effect of different parameters on the imaging results. The simulation results show that the cave-scattered waves include the PP-, PS-, SP-, and SS-waves. When plane scanning imaging is performed based on a single wave mode, the other wave modes become interference factors. After the weighted processing of the PP-, PS-, SP-, and SS-waves, plane scanning imaging based on multi-mode scattered acoustic waves is shown to weaken pseudo-solutions, enhance the signal-to-noise ratio, and improve the radial and axial positioning accuracy of scatterers. When the scatterer is close to the borehole axis, the echo received by the receiver is not a real plane wave. In contrast with the 3D slowness time coherence (STC) and beamforming methods, spherical scanning imaging based on single-mode scattered acoustic waves completely considers this fact, which improves its azimuth positioning accuracy. Furthermore, spherical scanning imaging based on multi-mode scattered acoustic waves accurately estimates the azimuth of caves beside a well with a high imaging resolution. Finally, numerical simulation results were validated using the field measurement data of a well, and the actual imaging effect of the new method was tested. Therefore, rather than using single-mode reflected waves with limited information, the proposed method of scanning imaging using scattered acoustic waves can substantially improve the imaging resolution and positioning accuracy of small-scale abnormal geo-bodies beside a well and enhance the detection range.

Numerical simulation of radiation, reflection, and reception of elastic waves from a borehole dipole source

Borehole radiation and reception responses for azimuthal shear-wave reflection imaging with an off-centred dipole acoustic tool

Characterizing the borehole response for single-well shear-wave reflection imaging

Single-well S-wave imaging using multicomponent dipole acoustic-log data

A theoretical analysis of the logging-while-drilling dipole acoustic reflection measurement

Identifying reflector azimuth from borehole multicomponent cross-dipole acoustic measurement

Factors Influencing Radiation Sound Fields in Logging While Drilling Using an Acoustic Dipole Source

Modeling and Inversions of Acoustic Reflection Logging Imaging Using the Combined Monopole–dipole Measurement Mode

A Simple Method for Fast Simulation of Total Reflection Waves of Single-Well Imaging with Eccentric Tools

A Fast Algorithm for Simulation and Analysis of Wavefields in Acoustic Single-Well Imaging of Logging-While-drilling Considering Arbitrary Types of Sources

A 3D plane-wave beamforming method for borehole azimuthal acoustic reflection imaging

Numerical simulation of borehole 3D scanning acoustic imaging using scattered waves

Simulation of the Borehole Quasistatic Electric Field Excited by the Acoustic Wave During Logging While Drilling Due to Electrokinetic Effect

Eliminating the azimuth ambiguity in reflected S-wave imaging logging based on the azimuthal receiver mode

Borehole azimuthal acoustic imaging using 3D spatial scanning: Application in acoustic detection of nearby wells

Feasibility of Estimating Parameters and Enhancing Reflections of Dipping Moho from Teleseismic P Wave Coda Autocorrelation

Wavefield simulation and analysis with the finite-element method for acoustic logging while drilling in horizontal and deviated wells

Radiating and accompanying electromagnetic fields during acousto-electromagnetic logging

Theoretical Simulation of the Multipole Seismoelectric Logging While Drilling

Field test of directional borehole radar in a hydrocarbon production well

Interface Detection of Near-Borehole Stratified Formation under Different Permeabilities Based on Seismoelectric Logs: A Finite-Difference Modeling