Enhancing 5G propagation into vehicles and buildings using optically transparent and polarisation insensitive metasurfaces over wide-incidence angles

Amirmasood Bagheri,Shadi Danesh,Fan Wang,Seyed Ehsan Hosseininejad,Mohsen Khalily,Rahim Tafazolli

DOI: https://doi.org/10.1038/s41598-024-51447-3

IF: 4.6

2024-03-23

Scientific Reports

Abstract:This article introduces two transmissive metasurfaces applied to normal windows, aiming to improve the 5G outdoor-to-indoor (O2I) coverage. These windows can be utilized in various settings, such as vehicles or buildings. The proposed unit cells, designed to be wide-incident angle and polarization insensitive, are implemented in both single-glazing and double-glazing glasses, arranged in a periodic structure to form the transmission surfaces. Both metasurfaces maintain optical transparency by incorporating Indium Tin Oxide (ITO) as the conductive element in each unit cell. These engineered transmission surfaces enhance the 5G signal indoor coverage at the 3.5 GHz band across a broad range of incident angles. While multi-layer structures typically exhibit heightened sensitivity to the angle of incidence, the proposed two-layered transmissive surfaces demonstrate substantial angular stability, reaching up to 65 and 75 degrees for double- and single-glazed glass, respectively. To achieve this wide and stable angular response, evolutionary optimization techniques were employed to fine-tune the proposed unit cells. Both designs exhibit a high transmission coefficient across the operating frequency for a variety of incident angles, surpassing those reported in the existing literature. Experimental evaluations of the fabricated prototypes indicate that both metasurfaces hold significant potential for enhancing signal propagation into buildings and vehicles.

multidisciplinary sciences

What problem does this paper attempt to address?

This paper mainly addresses the problem of insufficient coverage of 5G signals when propagating from outdoors to indoors (O2I). The researchers propose an innovative approach by applying two types of transmissive metasurfaces on ordinary windows to enhance the indoor coverage of 5G signals in the 3.5 GHz frequency band, especially for vehicles and buildings. These metasurfaces are designed to have wide incident angles and polarization insensitivity, can be implemented on single-layer and double-layer glass, and maintain optical transparency. By using evolutionary optimization techniques to fine-tune the unit cell designs, stable wide-angle responses of up to 65 degrees (double-layer glass) and 75 degrees (single-layer glass) were achieved, thereby improving the ability of 5G signals to penetrate glass and enter indoor spaces. The paper also compares the attenuation of 5G signals by different building materials and points out the limitations of conventional frequency selective surfaces (FSS), such as sensitivity to angles and polarization. The proposed metasurface solution aims to overcome these limitations and provide a simple, cost-effective, and applicable method for enhancing indoor 5G coverage using existing windows.