Abstract:Improving the mixing homogeneity of heterogeneous powder in real time plays an essential role in ensuring the forming quality of functionally graded materials (FGM) produced by laser-directed energy deposition (L-DED). In order to achieve a high performance of material composition and proportion control as forming FGM parts, this paper investigates the mixing mechanism of several typical powders including 316L and NiCrCoAlY used for the L-DED process driven by compressed gas. An innovative pneumatic powder mixer is designed and optimized by the CFD-DEM simulation method to analyze the mixing characteristics of heterogeneous particles. To improve the real-time mixing homogeneity of different mixing ratios in the conveying process, mixing experiments based on differences in powder properties were conducted by the additive-subtractive composite machining center, and a coefficient of variation method was proposed to describe the mixing homogeneity of non-uniform powders. The results of micro-morphology and EDS indicate that the mixing quality of the two-phase flow is significantly enhanced with the four 45° compression inlets and 2 m/s inlet velocity structure. The results show that the numerical analysis method proposed in this paper can effectively describe the mixing law of heterogeneous particles, and the compressed air intake velocity should not exceed the initial two-phase flow velocity. The horizontal and vertical components generated by the compressed air intake at 45° are more conducive to the formation of favorable perturbations to the two-phase flow, and the number of four and eight compressed air intakes that act uniformly on the flow field is more appropriate. After a certain period of time, the two-phase flow with low error of mixed powder quality can be produced continuously. The mixed powder quality is obviously improved after the disturbance of compressed air intake. The mixing uniformity of powder with low spherical particle proportion can be effectively improved by increasing the preset mixing proportion of non-spherical particles.

Impact of online mixing via KSM on the accuracy of ingredient deposition in manufacturing FGMs

Fabrication process of smooth functionally graded materials through a real-time inline control of the component ratio

Gradient Printing Alginate Herero Gel Microspheres for Three-Dimensional Cell Culture

Performance Evaluation and Scale-Up Behavior of an Engineered In-Line Mixer for 3D Printing

Numerical Simulation of Hydrodynamics and Mixing Characteristics of High-Viscosity Non-Newtonian Fluid in Twin-Shaft Kneaders

Automating the Design Process and Powder Processing of Functionally Gradient Materials

An active mixing printhead for PDMS-based functionally gradient material substrate using variable stiffness electric-field-driven jet deposition 3D printing

Enhanced Mixing Efficiency for a Novel 3D Tesla Micromixer for Newtonian and Non-Newtonian Fluids

Quantitative Analysis of Surface Profile in Fused Deposition Modelling

Characterization of a functionally graded material produced using a new designed blender

Evaluation of powder mixing homogeneity for laser-directed energy deposition (L-DED) of functionally graded materials

3D printing of polycaprolactone-based composites with diversely tunable mechanical gradients via multi-material fused deposition modeling

Scheil-Gulliver simulations for the design of functionally graded alloys by additive manufacturing using pycalphad

Numerical Assessment of In-Line Rotor–Stator Mixers in High-Shear Melt Conditioning (HSMC) Technology

Characterization of Interfacial Transition Zone of Functionally Graded Materials with Graded Composition from a Single Material in Electron Beam Powder Bed Fusion

Fabrication of SiC/Al functionally graded materials via filtration extrusion

A heterogeneous pore design algorithm for material extrusion additive manufacturing

FEM-DEM coupling analysis for solid granule medium forming new technology

Using a material database and data fusion method to accelerate the process model development of high shear wet granulation

Process parameter modeling for the fabrication of functionally graded materials via direct ink writing

Parameter Optimization and Precision Control of Water-Soluble Support Cores for Hollow Composite Castings Fabricated by Slurry Microextrusion Direct Forming Method