An X-band Fabry-Perot Cavity Antenna with Broadband and High-gain

Chang Peng,Hui Liang,Weixing Gao,Zhaoneng Jiang,Shuai Meng
DOI: https://doi.org/10.1109/PIERS62282.2024.10618740
2024-04-21
Abstract:In this paper, a broadband gain-stabilized Fabry-Perot cavity antenna (FPCA) is designed for X-band. The feed portion of the antenna is a coupled driver patch, and four trapezoidal sheets are located around the driver patch so that a resonant mode is introduced, and electrical coupling is formed with the driver patch to produce a radiation zero point, which in turn increases the bandwidth. The feed section is fed through a simple gap so that a higher bandwidth and more stable gain can be obtained. The designed Partial Reflective Surface (PRS) cell uses a relatively compact double-sided structure with a positive phase gradient using a uniform arrangement. And the gain enhancement can be obtained by having a 6 × 6 unit array through theoretical calculations. The feed antenna and the single-layer PRS establish the cavity structure, which constitutes an X-band FPCA with an overall dimension of 2.37λ0× 2.37λ0× 0.63λ0 (λ0 is the free-space wavelength at the center frequency), and the designed antenna is verified by simulation. The impedance bandwidth of the antenna is obtained to be 35.6% (8.37–12GHz), and the maximum gain can reach 15.7dBi. The relatively wide bandwidth and stable gain within the band can satisfy the bandwidth requirement of the communication system for the drastic increase in the amount of data in the era of big data, and at the same time, the simple antenna structure can be used in many wireless transmission fields.
Physics,Engineering
What problem does this paper attempt to address?