Abstract:International trends of increasing dairy herd sizes coupled with scarcity of labor has necessitated the enhancement of labor efficiency for dairy production systems. This study quantified the effects of infrastructure, automation, and management practices on the milking and operator efficiency of herringbone and rotary parlors used on pasture-based farms in Ireland. Data from 592 milkings across 26 farms (16 herringbones and 10 rotaries) was used. The metrics of cows milked per hour (cows/h), cows milked per operator per hour (cows/h per operator) and liters of milk harvested per hour (L/h) described milking efficiency. The metrics of total process time per cow (TPT, s/cow), milk process time per cow (MPT, s/cow), work routine time (WRT, s/cow), cluster time (CT, s/cluster), and attachment time per cow (ATC, s/cow) described operator efficiency. Automations investigated were backing gates, cluster flush, plant wash, cluster removers (ACRs), feeders, entry gates, rapid-exit, and teat spray. Additional operator presence at milking was also investigated. Herringbone and rotary parlors were assigned to quartiles from their cows/h per operator values to examine infrastructure, automations, and management practices variations. Fourth quartile herringbones based on cows/h per operator values (Q4) averaged 93 cows/h per operator using average system sizes of 24 clusters with 5 parlor automations. Q4 rotaries averaged 164 cows/h per operator using average system sizes of 47 clusters and an average CT of 13 s/cluster. Cows/h per operator values for Q4 herringbone and rotary parlors were 82% and 54% higher, respectively, than values observed on Q1 parlors, indicating the considerable potential to improve efficiency. To determine if infrastructure, automations, or additional operators at milking significantly affected operator efficiencies, general linear mixed models were developed. For parlor infrastructure, additional clusters had greater significance on operator efficiencies (MPT) for herringbones (-1.3 s/cow) as opposed to rotaries (-0.2 s/cow). Hence, increases in system size was likely to result in improved efficiencies for herringbones but less so for rotaries. For automations, ACRs significantly reduced herringbone TPT, CT, and WRT values by 13.3 s/cow, 18.9 s/cluster, and 32.6 s/cow, respectively, whereas rapid-exit significantly lowered CT by 18.6 s/cluster. We found no significant effect on rotary TPT, MPT, CT, or WRT values from the use of automatic teat sprayers. An additional operator at milking was found to significantly reduce herringbone TPT but not MPT or CT. For rotaries, a second operator had no significant effect on TPT, MPT, CT, or WRT values. We documented strong negative correlations between operator efficiencies (TPT, MPT) and milking efficiency (cows/h) for both herringbone (-0.91, -0.84) and rotaries (-0.98, -0.89). Strong negative correlations between the herringbone automation count and TPT (-0.80), MPT (-0.72), and CT (-0.75) suggested highly automated parlors were likely to achieve greater operator efficiencies than less automated parlors. The strong negative correlation (-0.81) between rotary milking efficiency (cows/h) and CT suggested lower CT values (i.e., rotation speed) resulted in increased milking efficiency. In conclusion, our study quantified the effects of parlor infrastructure, automation, and management practices on the milking and operator efficiency of herringbone and rotary parlors.

Effort and time in pipeline milking.

Studies on the Use of Permanent Milk Pipelines in Dairy Barns. I. Effect of Different Types of Installation on Milk Quality

The behaviour of dairy cows in an automatic milking system where selection for milking takes place in the milking stalls

Effect of milk flow rate switch-point settings on cow comfort and milking duration

Comparison of Functional Aspects in Two Automatic Milking Systems and Auto-Tandem Milking Parlors

The effect of pulsation ratio on teat condition, milk somatic cell count and productivity in dairy cows in automatic milking

Stress Responses during Milking; Comparing Conventional and Automatic Milking in Primiparous Dairy Cows

Effects of Pulsation Ratio, Pulsation Rate, and Teatcup Liner Design on Milking Rate and Milk Production

The Rate of Machine Milking of Dairy Cows. II. Effect of Vacuum and Pulsation Rate

Milking interval, milk production and milk flow-rate in an automatic milking system

Relationship of Pulsation Rate, Pulsation Ratio, and Vacuum Decrease Time to Milking Performance

Measurement of cow comfort during milking on different cluster removal settings through the use of leg-mounted accelerometers

Milking Systems for Large Herds

Reduced liner-open phase and vacuum instead of prestimulation increase parlor efficiency in dairy cows

Milk flow-controlled changes of pulsation ratio and pulsation rate affect milking characteristics in dairy cows

The effects of seasonality, management, infrastructure, and automation on the milking efficiency of herringbone and rotary milking parlors in Ireland

Identifying strategies to enhance the milking and operator efficiency of herringbone and rotary parlor systems in Ireland

A method for assessing teatcup liner performance during the peak milk flow period

Comparison of Mechanized and Automated Technologies in the Scope of Cumulative Energy in Sustainable Milk Production

Effects of Early Lactation Milking Frequency in an Automated Milking System on Cow Performance