Abstract:In China, the district heating (DH) substation serves as a large heating area and has different functions in buildings. However, the control methods of DH substations are yet to adjust the water supply temperature according to the existing outdoor meteorological parameters. Due to hydraulic imbalance, it is difficult to implement flexible control according to building functions, resulting in uneven heating in different buildings and high energy use. This study aims to implement demand heating through a hybrid control method (HCM) based on the dynamic demand of room temperatures. The HCM integrates centralized and distributed controls. First, the resistance identification and hydraulic balance calculations of the pipe network were performed according to the flow and pressure balance equation to maintain conditions close to the real working condition. Second, according to the most unfavorable loop room temperature, the secondary water supply temperature was corrected to ensure that the heat supply of the substation met the requirements. Finally, the distributed valve opening was corrected by room temperature feedback from each building to achieve accurate control of room temperature. This study considered a DH substation serving both residential and office buildings as an example. The dynamic simulation model was built for analysis. Compared with the conventional control method (CCM), the HCM can effectively overcome the uneven heating phenomenon, the fluctuation of room temperature was significantly reduced, and the thermal comfort was enhanced. The heating energy use of the DH substation was reduced by 12%. The energy use of office buildings was reduced by 27.5%–38.3%. The energy consumed by circulation pump operation was reduced by 16%. The cost-saving was approximately 2.57 RMB/m 2 , and the total cost-saving was 4.12 × 10 5 RMB. In this study, the problem of dynamic thermal balance of DH substations was solved with the proposed system, which effectively responds to the demand for heating while improving energy efficiency through a flexible control system.

Development of the heating load prediction model for the residential building of district heating based on model calibration

Research on the framework and meteorological parameter optimization method of dynamic heating load prediction model for heat-exchange stations

A novel combined model for heat load prediction in district heating systems

A study on data-driven hybrid heating load prediction methods in low-temperature district heating: An example for nursing homes in Nordic countries

Dynamic Temperature Model of District Heating System Based on Operation Data

Precise Control for Heating Supply to Households Based on Heating Load Prediction

How to better match predicted loads of district heating system: A novel control approach focused on coupling source and network by data-driven methods

Simplified Model of HVAC Load Prediction for Urban Building Districts

Occupant-centric Dynamic Heating and Cooling Loads Simplified Prediction Model for Urban Community at Energy Planning Stage

Building heating load forecasting based on the theory of transient heat transfer and deep learning

Dynamic modeling and intelligent heating strategies of district heating system based on the standardized thermal resistance

A dynamic control strategy of district heating substations based on online prediction and indoor temperature feedback

Steady-State Performance Prediction for a Variable Speed Direct Expansion Air Conditioning System Using a White-Box Based Modeling Approach

A Prior-Knowledge-based Time Series Model for Heat Demand Prediction of District Heating Systems

Energy Planning-oriented Simplified Models of Envelope Dynamic Load Prediction for Individual Buildings

Prediction of residential district heating load based on machine learning: A case study

Data-driven application on the optimization of a heat pump system for district heating load supply: A validation based on onsite test

Operational optimization of district heating system based on an integrated model in TRNSYS

A hybrid control method for district heating substations based on time-based room temperature demand

Application of Combined Models Based on Empirical Mode Decomposition, Deep Learning, and Autoregressive Integrated Moving Average Model for Short-Term Heating Load Predictions

An artificial intelligence (AI)-driven method for forecasting cooling and heating loads in office buildings by integrating building thermal load characteristics