Abstract:Dry casks for spent nuclear fuel (SNF) ensure the safe storage of SNF and provide radiation shielding. However, the presence of the thick casks encompassing several layers of steel and concrete makes inspection of the SNF a challenging task. Fast neutron interrogation is a viable method for the nondestructive assay of dry storage casks. In this study, we performed a Monte Carlo simulation-based study associated with a machine-learning-based image reconstruction method to verify the content of SNF dry storage casks. We studied the use of neutron transmission and back-scattered measurements to assess the potential damage to fuel assemblies or fuel pin diversion during transportation of dry casks. We used Geant4 to model a realistic HI-STAR 100 cask, MPC-68 canister and basket, and GE-14 fuel assembly irradiated by a D-T neutron generator. Several bundle diversion scenarios were simulated. The angular distribution of the neutrons scattered by the cask was used to identify the diversions inside the fuel cask. A fuel bundle with at least 75% of its pins removed can be identified with a drop in the back-scattered signature larger than 2σ\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$$2\sigma$$\end{document} compared with a fully loaded scenario. We combined an iterative reconstruction algorithm with a convolutional neural network (CNN) to obtain a cross-sectional image of the fuel inside the cask. The proposed imaging approach allows locating the position of a missing fuel bundle with at least 75% of the pins removed when performing tomographic imaging of a canister with an overall scan time of less than two hours, when using a commercial neutron generator with a source strength of 1010\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$$10^{10}$$\end{document} n/s in the 4π\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$$\pi$$\end{document} solid angle.

On the behavior of a concrete-based dry cask for spent nuclear fuel in off-normal and accidental conditions

Uncertainty and Sensitivity Analysis of a Dry Cask for Spent Nuclear Fuel

Thermal analysis of HI-STORM 100S dry cask with the MELCOR code

Sensitivity of the neutron multiplication factor to water ingress into a spent fuel cask

Thermal Analysis on NAC-STC Spent Fuel Transport Cask under Different Transport Conditions

Monte Carlo Simulations of Spent Nuclear Fuel Dry Storage Cask Measurements with a New External Remote Monitoring System for Developing Safeguards Approaches

Monitoring for Actinide Neutron Emissions From Spent Nuclear Fuel Under Extreme Gamma Fields Using Centrifugally Tensioned Metastable Fluid Detector Sensor Technology

Neutron Measurements and Monte Carlo Simulations of Spent Nuclear Fuel in Dry Cask Storage Using a New Remote Monitoring System Prototype

Study on the Structural Evaluation and Optimization of Spent Nuclear Fuel Cask

Design and Analysis of an Internal Remote Monitoring System for Spent Nuclear Fuel Stored in a Dry Cask

Preliminary Modeling of Chloride Deposition on Spent Nuclear Fuel Canisters in Dry Storage Relevant to Stress Corrosion Cracking

Destructive and non-destructive evaluation of reinforced concrete dry casks affected by alkali-silica reactivity damage

Investigating the Natural Convection Behavior in the Transportable Storage Canister of Dry Storage Systems Through CFD Simulation

Neutron Tomography of Spent Fuel Casks

A Limited-Scope Probabilistic Risk Assessment Study to Risk-Inform the Design of a Fuel Storage System for Spent Pebble-Filled Dry Casks

Design and dynamic analysis of transport cask for SMR fresh fuel assembly

Impact Analysis of a Commercial Airplane Over a Nuclear Spent Fuel Dry Storage Cask

Turbulent Particle Flow in Spent Nuclear Fuel Storage Systems

A Methodology for Optimizing the Management of Spent Fuel of Nuclear Power Plants Using Dry Storage Casks

Analysis of the Long-Term Interaction Between Molten Core and Dry Concrete at Fukushima Daiichi Unit 1

Uncertainty analysis of ATF Cr-coated-Zircaloy on BWR in-vessel accident progression during a station blackout