Abstract:The mechanical behaviors of binary mixtures are different from that of uniform soils. However, experimental studies on the dynamic responses of sand-silt mixtures considering the combined effects of fines content (FC) and host sand gradation are limited in the literature. In this paper, an experimental program was designed concerning five binary mixtures with three grain size ratios ( R d ) and three sand uniformity coefficients ( C us ) for investigating the effects of fines content and host sand gradation on both the liquefaction resistance and the excess pore water pressure (EPWP) generation of sand-silt mixtures. Results show that the effect of FC on the liquefaction resistance of sand-silt mixtures depends on relative density ( D r ), grain size ratio, and sand uniformity coefficient. The liquefaction resistance of sand-silt mixture can be uniquely characterized by the equivalent relative density D r * regardless of FC, D r , and host sand gradation. Relationship between the EPWP ratio R u and the cycle ratio N / N L for the sand-silt mixtures can be well expressed by the Seed model, which is significantly affected by cyclic stress ratio (CSR), FC, and D r but insensitive to the change of host sand gradation. A trained artificial neural networks (ANN) model is conducted to predict the fitting parameter β of the Seed model with a maximum difference of 25% between the predicted and measured values. Moreover, there is an arctangent relationship between R u and shear strain amplitude γ a of each specimen, and the fitting parameter A for the relationship is sensitive to the particle size distribution and stress amplitude. A unique relationship between a density-corrected parameter A / D r * and CSR is proposed regardless of FC and host sand gradation.

Estimation of maximum void ratio with effect of fines content for soil mixtures

Influences of fines content on cyclic resistance ratio of fines-sand-gravel mixtures

Comparative Modelling of Indirect Tensile Strength of Asphalt Mixtures with and Without Considering Air Void Characteristics

Effects of Asphalt-Aggregate Ratios and Compaction Efforts on Horizontal Aggregate Homogeneity in Asphalt Mixtures

Experimental Investigation into Limit Void Ratio Characteristics of Calcareous Sands considering Various Factors

Prediction Model for Small-Strain Shear Modulus of Non-Plastic Fine–coarse-Grained Soil Mixtures Based on Extreme Void Ratios

Effects of particle morphology on the minimum and maximum void ratios of granular materials

A hypoplastic model for sand-fines mixtures

Influences of particle size distribution and fines content on the excess pore water pressure generation of sand-silt mixtures under cyclic loading

An improved characterization model of liquefaction resistance by shear wave velocity for binary mixtures with consideration of coarse content

Vertical Void Distribution and Uniformity Analysis of Asphalt Mixtures Using Three-Stage Exponential Model

Exploring Packing Density, Critical State, and Liquefaction Resistance of Sand-Fines Mixture Using DEM

Void Effect Study on the Compressive Behavior of RFC Based on the 3D Four-Phase Mesoscopic Finite Element Model

Equivalent state parameter dependency on gradation properties of medium sand-fines mixtures

Experimental Investigation On Liquefaction Resistance Of Soil Mixtures Incorporating Intergrain Contact State

Porosity of Bimodal Sediment Mixture with Particle Filling

Particle Flow Simulations of the Compaction of Filling Materials in Highly Filled Foundation with Analyses of the Transverse Isotropy

A thermodynamically consistent constitutive model for soil-rock mixtures: A focus on initial fine content and particle crushing

Estimation of critical ratio of bentonite addition to tuff sand

Improved Mechanical Models for Self-Compacting Concrete in the Paste Rheological Thresholds Theory Considering the Pressure Between Particles

Evaluation of volumetric threshold shear strain of gravel-sand mixtures in centrifuge model tests