Abstract:Lithium ion batteries (LIB) are representing a milestone in electrochemical energy storage and are still the state-of-the-art battery system for various mobile and stationary energy storage applications. However, the practical energy density of LIBs starts to reach an asymptotic limit. Beside LIBs, an auspicious variety of battery systems comprising a better option for specific applications in terms of e.g. energy density, so establishing a diversity of specific battery systems for specific applications is a good strategy. [1 ] After initially paving the way for the LIB, the lithium metal battery (LMB) experiences a revival due to an outstanding theoretical specific capacity (3 860 mAh g −1 ) and low electrochemical potential (−3.04 V vs. SHE). However, continuous electrolyte consumption, the formation of an inhomogeneous SEI and high surface area lithium (HSAL), whose growth is induced by the heterogeneous and fragile structure of the SEI film, are still dominant challenges that need to be overcome. The liquid electrolytes also deal with safety issues like risk of leakage and flammability. The combination of Li metal with solid polymer electrolytes (SPE) could supress HSAL formation and avoid those safety hazards. However, SPEs deal with poor ionic conductivity at room temperature (10 −8 S cm −1 ≤ σ ≤ 10 −5 S cm −1 ) and, additionally, it is necessary to control the Li morphology during electrodeposition/dissolution to realize high-energy all-solid-state batteries (ASSB) based on Li metal anodes. [2 ,3 ] Several artificial protective coatings have been proposed to improve the LMA/SPE interface by facilitating the Li ion flux, promoting a homogeneous Li electrodeposition/dissolution and protecting the LMA against electrolyte degradation as well as enhancing the Li wetting interface. The SPE induces a more flexible interphase that withstands the volume change. Recently, metal oxides coated by atomic layer deposition (ALD) have gained attention due to a great thickness control, the possibility of monolayer deposition as well as a consequential homogeneity of the deposited protection layer. Furthermore, ALD is suitable for roll-to-roll coatings which is feasible for industrial application. [3,4 ] Herein, the setup of Li-metal-polymer batteries (LMP® technology) commercialized by Blue Solutions and applied in their "blue cars" (30 kWh, 100 Wh kg -1 ) was modified in several points. Li metal was coated with a metal oxide via atomic layer deposition (ALD) to form an intermetallic phase as protective layer and to improve the Li + flux. The artificial protective coating at Li metal was combined with a PEO- and/or polyether-based SPE and the effect of the modifications on the electrochemical performance in different ASSB setups was investigated and characterized. [1] Placke, T.; Kloepsch, R.; Dühnen, S.; Winter, M. Lithium ion, lithium metal, and alternative rechargeable battery technologies: the odyssey for high energy density. Journal of Solid State Electrochemistry 2017, 21, 1939-1964. [2] Cheng, X.-B.; Zhang, R.; Zhao, C.-Z.; Zhang, Q. Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review. Chemical Reviews 2017, 117, 10403-10473. [3] Han, Z.; Zhang, C.; Lin, Q.; Zhang, Y.; Deng, Y.; Han, J.; Wu, D.; Kang, F.; Yang, Q. H.; Lv, W. A Protective Layer for Lithium Metal Anode: Why and How. Small Methods 2021, 5, 2001035. [4] Han, Y.; Liu, B.; Xiao, Z.; Zhang, W.; Wang, X.; Pan, G.; Xia, Y.; Xia, X.; Tu, J. Interface issues of lithium metal anode for high‐energy batteries: Challenges, strategies, and perspectives. InfoMat 2021, 3, 155-174.

Tunable LiZn‐Intermetallic Coating Thickness on Lithium Metal and Its Effect on Morphology and Performance in Lithium Metal Batteries

Li–Zn Overlayer to Facilitate Uniform Lithium Deposition for Lithium Metal Batteries

Dual-Protective Artificial Layer on Lithium Metal Anodes for Improved Electrochemical Performance – an in-Depth Morphological and Electrochemical Characterization

Modulating Lithium Nucleation Behavior Through Ultrathin Interfacial Layer for Superior Lithium Metal Batteries

Interface Engineering Enabling Thin Lithium Metal Electrodes Down to 0.78 Μm for Garnet-Type Solid-State Batteries

Advancing Anode-Less Lithium Metal Batteries: ZnF2 Modification and In-Situ Structural Regulation for Enhanced Performance

Molten-Li infusion of ultra-thin interfacial modification layer towards the highly-reversible, energy-dense metallic batteries

Uniformizing the lithium deposition by gradient lithiophilicity and conductivity for stable lithium-metal batteries

Lithium Zinc/Lithium Iodide Composite Modified Layer toward Highly Stable Lithium Metal Anodes

Liquid metal as an efficient protective layer for lithium metal anodes in all‐solid‐state batteries

Effect of Liquid Metal Coating on Improved Cycle Performance of Anode-Free Lithium Metal Battery

Mechanical Surface Modification of Lithium Metal: Towards Improved Li Metal Anode Performance by Directed Li Plating

Interfacial friction enabling ≤ 20 μm thin free-standing lithium strips for lithium metal batteries

Tuning wettability of molten lithium via a chemical strategy for lithium metal anodes

Molecular-Level Engineering of Protected Li Metal Anodes for High Performance Next-Generation Batteries

Towards Safer All-Solid-State Lithium Metal Batteries by an Artificial Protection Layers

Suppressing Lithium Dendrite Growth by Metallic Coating on a Separator

Chemical Prelithiated 3D Lithiophilic/-Phobic Interlayer Enables Long-Term Li Plating/Stripping

Flaky and Dense Lithium Deposition Enabled by a Nanoporous Copper Surface Layer on Lithium Metal Anode

Fabrication of Hybrid Silicate Coatings by a Simple Vapor Deposition Method for Lithium Metal Anodes

ZrO2 Thin Film Protected Li Metal Anode for Improved Electrochemical Performance