Abstract:AC pulse heating is a promising preheating method for lithium-ion batteries due to its low energy cost and high efficiency. To avoid the lithium plating in the AC heating, upper bound of heating current (UBHC) should be obtained. In this paper, the dual RC model is developed, and coupled with the thermal model to predict the battery temperature and potential of negative electrode (PNE). PNE = 0 V is used as the lithium plating criteria. If the PNE falls to 0 V during the heating process, the lithium plating is triggered, and the corresponding pulse amplitude is the UBHC. Moreover, because the UBHC increases with the battery temperature, the pulse amplitude should be automatically raised to increase the heating efficiency. When the battery temperature is too low, the UBHC is so small that the AC pulse heating is inapplicable. Through the self-adaptive AC pulse based on the UBHC, the heat strategy is built, and the heating time is calculated. The total heating time reached by the proposed strategy increases with the increment of the initial SOC, and it falls with the decrease of the initial battery temperature. Moreover, the heating time has a temperature limit. If the battery temperature is lower than the limit, the battery cannot be heated to the target temperature in the required time. The proposed strategy is applied to heating the battery at the different SOCs, and its performance is compared to the constant amplitude pulse. In the same heating time, the battery temperature achieved by the proposed strategy is at least 7.6 °C higher than the constant amplitude pulse. Moreover, the UBHC is enlarged by 10% to prove the original UBHC can reduce the degradation. The cyclic heating experiment shows that the 110% UBHC reaches a capacity loss of 0.49 Ah after 60 heating cycles and that of the original UBHC is only 0.1 Ah.

A Self-heating and Charging Coordinated Strategy for Low-temperature Lithium-ion Batteries based on a Novel DAB-LC Converter

A Novel DC-AC Fast Charging Technology for Lithium-Ion Power Battery at Low-Temperatures

Pulse self-heating strategy for low-temperature batteries based on bidirectional charging systems

An ultra-fast charging strategy for lithium-ion battery at low temperature without lithium plating

Research on the Combined Control Strategy of Low Temperature Charging and Heating of Lithium-Ion Power Battery Based on Adaptive Fuzzy Control

A rapid self-heating strategy of lithium-ion battery at low temperatures based on bidirectional pulse current without external power

Temperature-aware charging strategy for lithium-ion batteries with adaptive current sequences in cold environments

A Multi-objective Optimized Self-heating Strategy for All-Climate Batteries at Low Temperatures

A health-aware AC heating strategy with lithium plating criterion for batteries at low temperatures

Frequency varying heating strategy for lithium-ion battery rapid preheating under subzero temperature considering the limitation of on-board current

An Internal Heating Strategy for Lithium-Ion Batteries Without Lithium Plating Based on Self-Adaptive Alternating Current Pulse

Integrated All-Climate Heating/Cooling System Design and Preheating Strategy for Lithium-Ion Battery Pack

An optimized internal heating strategy based on bidirectional pulsed current for lithium-ion battery at low temperature

Experimental study on self-heating strategy of lithium-ion battery at low temperatures based on bidirectional pulse current

Targeting the low-temperature performance degradation of lithium-ion batteries: a non-destructive bidirectional pulse current heating framework

Battery heating for lithium-ion batteries based on multi-stage alternative currents

Synergetic modulation on solvation structure and electrode interface to achieve lithium-ion batteries cycled at ultra-low temperature

A Self-adaptive Multistage Constant Current Fast Charging Strategy for Lithium-ion Batteries Integrating Cooling Strategy

An Adaptive Low-Temperature Mutual Pulse Heating Method Based on Multiplexing Converters for Power-Redistributable Lithium-Ion Battery Pack

Multistage CC-CV Charge Method for Li-Ion Battery

Optimal external heating resistance enabling rapid compound self-heating for lithium-ion batteries at low temperatures