Abstract:A novel micropatterning technique that harnesses controlled fracture of 2D Ruddlesden–Popper perovskites are developed, enabling precise control over size and shape variations. Pixelated light‐emitting diodes (LEDs) are fabricated by using this method, showcasing minimal degradation even as pixel sizes decrease. Additionally, patterning strategies that can be easily adapted for constructing heterostructures and future optoelectronic devices are presented. Quasi‐2D Ruddlesden–Popper perovskite (RPP) have surfaced as a promising candidate for light emitting diodes (LEDs) due to its outstanding optoelectronic properties. However, a reliable approach for patterning RPPs remains elusive due to the use of polar solvents in lithographic processes, which can damage the RPP. Here, a reliable and damage‐free dry micropatterning method of RPPs is reported, which also offers a cost/time advantage compared to conventional patterning methods. The sharp edges of high aspect ratio silicon micropillars are used to cut RPPs to a pre‐defined shape and then the cut RPPs are delaminated to obtain a patterned array of RPPs. The resultant patterned array exhibits no sign of degradation or discernable difference between adjacent pixels, achieving a ≈100% yield. The obtained array is utilized to fabricate a pixelated LED where a sharp electroluminescence (EL) spectrum peaking at 410 nm with full‐width‐at‐half‐maximum (FWHM) of 10 nm is observed. The pixelated devices demonstrate the potential to suppress EQE drops as the pixel size decreases, attributed to both the damage‐free micropatterning process and the defect tolerance of RPPs. Moreover, further improvements of the patterning method are demonstrated to avoid parasitic emission and suggest a promising strategy to fabricate pixel‐accessible micro‐LEDs.

Solution‐Processed Large‐Scale Concentric‐Ring Laser on Two‐Dimensional Ruddlesden–Popper Perovskites Thin Films

Periodic Organic–Inorganic Halide Perovskite Microplatelet Arrays on Silicon Substrates for Room‐Temperature Lasing

Low‐Threshold, External‐Cavity‐Free Flexible Perovskite Lasers

Low Threshold Lasing from 2D Homologous Organic-Inorganic Hybrid Ruddlesden-Popper Perovskite Single-Crystals.

Lasing from Mechanically Exfoliated 2D Homologous Ruddlesden-Popper Perovskite Engineered by Inorganic Layer Thickness.

Quasi-two Dimensional Ruddlesden-Popper Halide Perovskites for Laser Applications

Direct Observation of Competition between Amplified Spontaneous Emission and Auger Recombination in Quasi-Two-Dimensional Perovskites.

Controlled Fracture‐Based Micropatterning of Ruddlesden–Popper Halide Perovskite for Ultra High‐Density Arrays of Micro Light Emitting Diodes

Self‐Healing Lithographic Patterning of Perovskite Nanocrystals for Large‐Area Single‐Mode Laser Array

A Photonic Crystal Laser from Solution Based Organo-Lead Iodide Perovskite Thin Films

Giant and Tunable Optical Nonlinearity in Single‐Crystalline 2D Perovskites due to Excitonic and Plasma Effects

Amplified Spontaneous Emission with a Low Threshold from Quasi‐2D Perovskite Films via Phase Engineering and Surface Passivation

Fabry-Perot Oscillation and Resonance Energy Transfer: Mechanism for Ultralow-Threshold Optically and Electrically Driven Random Laser in Quasi-2D Ruddlesden-Popper Perovskites

Phase Tailoring of Ruddlesden–Popper Perovskite at Fixed Large Spacer Cation Ratio

Quasi 2D Perovskite Single-Mode Vertical-Cavity Lasers Through Large-Area Film Transfer

Large-Scale Thin CsPbBr3 Single-Crystal Film Grown on Sapphire Via Chemical Vapor Deposition: Toward Laser Array Application

Enhanced amplified spontaneous emission performance through effective regulation of phase distribution in Ruddlesden-Popper perovskite films

Multifunctional Molecule-Assisted Crystallization Control for Efficient Perovskite Light-Emitting Diodes

High-Resolution in Situ Crystallization and Patterning of a CsPbBr3 Film Via Femtosecond Laser Printing

Mask-Free Patterned Perovskite Microcavity Arrays via Inkjet Printing Targeting Laser Emission

High-Resolution In Situ Crystallization and Patterning of a CsPbBr 3 Film via Femtosecond Laser Printing