Abstract:The increasing number of photovoltaic (PV) panels installed worldwide requires solutions for their disposal at their end-of-life. PV modules contain several valuable metals like copper and silver as well as toxic ones like lead used in solder. Another valuable component are silicon wafers, because of their high purity, which is obtained in energy and resource intensive production processes. Many recycling procedures, however, are downcycling processes that do not recover these components, but rather are based on shredding and landfilling the modules or obtaining only one of those materials. Often, nitric acid is used as leaching agent for the recovery of silver and copper resulting in harmful NO x emissions that necessitate additional gas treatment. We present an alternative electrochemical process by which leaching reagents are generated on boron-doped diamond electrodes as anode material, which are ideal for this task due to their high overpotential for the oxygen evolution reaction. By evaluating different electrolytes, sulfuric acid was found to be suitable by generating peroxydisulfate (S2O82−). With its standard redox potential of +2.0 V, it is possible to oxidize rather noble metals like silver. To evaluate the efficiency of the process S2O82− was generated from sulfuric acid in an H-cell setup and the leaching rate of copper, silver and tin was investigated and optimized by varying acid concentration and current density. Efficient leaching of all metals was achieved in 5 M sulfuric acid at 200 mA/cm2. The feasibility of the process for real waste streams was demonstrated by disassembling PV modules and leaching busbars and silver coatings from wafers. The complete removal of the metal coatings from the residual wafers was confirmed by EDX. A significant advantage of the process with S2O82− as leaching agent is, that the reaction with metals forms sulfate that can be oxidized again within a cyclic process driven by electricity as displayed in figure 1. Additionally, the metals can be recovered by electrowinning from the etching solution within the same cell. This was demonstrated by recovering Ag, Cu and Sn from sulfuric acid solution. By using potentiostatic conditions it was additionally possible to separate the metals by consecutively plating them in the order of their respective redox potentials. Leached metals from PV waste were recovered electrochemically with 99 % and 88 % yield for Cu and Ag, respectively. Sn could not be plated due to the high amounts of persulfate present in solution, however recovery by precipitation is possible. Pb is obtained as undissolved residue during leaching, due to the extremely low solubility of PbSO 4 and PbO 2 . Aside from the H-cell experiments the generation of S2O82− and electrowinning was successfully investigated in a flow cell setup. This system benefits from a significantly decreased cell voltage making the process more energy efficient and allows easier upscaling towards industrial applications. The presented process is energy efficient as both electrode reactions are utilized and furthermore does not require the continuous addition of chemicals, therefore, making it an eco-friendly and sustainable alternative to conventional recycling methods. Figure 1: Scheme for the cyclic process of peroxydisulfate generation, leaching and electrowinning during the electrochemical recycling of PV waste. Figure 1

Co-recovery of Ag and Si from PV cell panels: Directional solidification assisted by PV glass

Catalytic recovery of metals from end-of-life polycrystalline silicon photovoltaic cells: Experimental insights into silver recovery

Silver Recovery from End-of-Life Photovoltaic Panels Based on Microbial Fuel Cell Technology

Efficient and comprehensive recycling of valuable components from scrapped Si-based photovoltaic panels

A comprehensive hydrometallurgical recycling approach for the environmental impact mitigation of EoL solar cells

Silver Recovery from Wastewater, Simulating the Chemical Extract Originating from a PV Panel Using Microbial Fuel Cell Technology

Comprehensive recycling and utilization of photovoltaic waste: Use photovoltaic glass waste to refine silicon kerf waste

Efficient Recovery of Silver and Aluminum from End-of-Life Photovoltaics: A Two-Step Leaching Approach

Recycling of silicon from waste PV diamond wire sawing silicon powders: A strategy of Na2CO3-assisted pressure-less sintering and acid leaching

Recycling of diamond-wire sawing silicon powder by direct current assisted directional solidification

An Electrochemical Process for the Recovery of Metals and High Purity Silicon from Photovoltaic Modules

Recycling of materials from silicon base solar cell module

Recycling waste crystalline-silicon solar cells: Application as high performance Si-based anode materials for lithium-ion batteries

Recovering valuable metals from recycled photovoltaic modules

Toward sustainability for upcycling SoG-Si scrap by an immersion rotational segregation purification process

Hydrometallurgy recovery of copper, aluminum and silver from spent solar panels

A Kinetic Study of Silver Extraction from End-of-Life Photovoltaic Panels through Gold-REC1 Process

Nondestructive silicon wafer recovery by a novel method of solvothermal swelling coupled with thermal decomposition

Photovoltaic recycling: enhancing silicon wafer recovery process from damaged solar panels

A systematically integrated recycling and upgrading technology for waste crystalline silicon photovoltaic module

Recycling Si in waste crystalline silicon photovoltaic panels after mechanical crushing by electrostatic separation