Abstract:In-situ conversion of oil shale process has been appealing from economic and energy security perspectives. Conventional in-situ upgrading techniques use electric heaters to heat oil shale, not shale oil. However, the efficiency of electrical heating method is very slow which requires preheating more than a year. Most conventional heating technologies focused on using different heat injection methods converting the shale oil reservoirs. As shale is a poor heat conductor, many of attempts are still in the laboratory stage. The shale oil matrix is very tight and the pore scale ranges from micro to nano-meter. In this paper, we propose to inject air into hydraulically fractured horizontal wells to create in-situ combustion of shale oil in ultra-low permeability formations. Heat is introduced into the formation through multistage fractured horizontal wells, which enhances the contact area of exposed kerogen. This process uses combustion reactants as fuel feed stock to generate perpetual heating. Firstly, we used the laboratory tube combustion of shale oil results to validate the simulation model. Then, we upscale the simulation model to investigate the well productivity performance by in-situ upgrading of shale oil by air injection. The main objective of this work is to determine the technical feasibility of recovering shale oil resources by air injection. It involves the application of hydraulic fracturing technology to enhance the kerogen exposure to oxygen. Heat flows from the fracture into shale oil formation, gradually converting the solid kerogen into mobile oil and gas which can be produced via fractures to the production wells. Our simulation results in this paper have shown the potential of in-situ combustion process to improved oil recovery in shale oil reservoirs. Simulation result indicates that the key parameters controlling the well productivity include air injection rate, injected gas composition and fracture spacing. The available literature provides limited studies on the applicability of in-situ combustion of shale oil in very low permeability formations. The paper provides a comprehensive model that allows kerogen to undergo thermal cracking and oxidation process. The results of this study indicate that the developed kinetic model is feasible to model the kerogen in-situ conversion process induced by air injection.

Unveiling the mechanisms of in-situ combustion of post-steam driven heavy oil by electric heating method induced auto-ignition

Characterization on Ignition and Volatile Combustion of Dispersed Coal Particle Streams: in Situ Diagnostics and Transient Modeling

Experimental study on piloted ignition temperature and auto ignition temperature of heavy oils at high pressure

Study of the Ignition Characteristics of Light Fractions of Crude Oil and Their Surrogate Fuels under a Range of Low-to-Medium Temperatures

Combustion-tube Test of Air Injection for Light-Oil Resetvoir

An in situ combustion process for recovering heavy oil using scaled physical model

EXPERIMENTAL STUDY AND NUMERICAL SIMULATION OF TWO-STAGE OIL-LESS IGNITION SYSTEM

AN APPROACH TO LIL-SAVING FOR IGNITION OF PULVERIZED COAL FIRED BOILERS

Numerical investigation of the mechanisms in co-injection of steam and enriched air process using combustion tube tests

Experiment study on oil droplet induced pre-ignition in RCM

Numerical and experimental investigation of production performance of in-situ conversion of shale oil by air injection

Ignition and Burning Behaviors of Automobile Oil in Engine Compartment

Numerical Modelling of Hybrid Steam and In-Situ Combustion Performance for Oil Sands

Insights into In-Situ Upgrading of Bitumen in the Hybrid of Steam and Combustion Process: from Experimental Analysis Aspects

Explosion Mechanism of Lubricating Oil Droplets in High-Temperature and High-Pressure Combustion Environments

In Situ Combustion Characteristics of Heavy Oil in the Liaohe Oilfield at Different Temperatures

Experiment and Numerical Simulation on High-Temperature Oxygen-Enriched Oil-Free Pulverized Coal Ignition

Experimental Research On No-Oil Ignition Technique Of Pulverized Coal/Coal-Water-Slurry

Theoretical Analysis of the Effect of Electrical Heat In Situ Injection on the Kerogen Decomposition for the Development of Shale Oil Deposits

Enhanced heavy oil recovery and performance by application of catalytic in-situ combustion

Investigation of Mechanisms in Plasma-Assisted Ignition of Dispersed Coal Particle Streams