Abstract:Developing stable and highly efficient photoactive materials is desirable to their extensive application in photoelectrochemical (PEC) sensors. Herein, a nickel–cobalt layered double hydroxides (NiCo-LDHs) cocatalyst-modified TiO2 nanotube arrays (TiO2NTAs) photoelectrode (NiCo-LDHs/TiO2NTAs/Ti) was fabricated and used to construct a PEC sensing platform for hexavalent chromium, Cr(VI), detection. The resultant NiCo-LDHs/TiO2NTAs/Ti showed higher photocatalytic water-splitting activity than the pristine TiO2NTAs/Ti, and an enhanced anodic photocurrent was realized at a potential of 0 V (vs Ag/AgCl). On the basis of changes of the photocurrent signal induced by the interaction between photogenerated electrons and Cr(VI) as an effective electron scavenger in solution, a PEC sensor for Cr(VI) detection was developed and showed a linearly decreased photocurrent with increasing Cr(VI) concentration between 0.5−20 μM, 20−400 μM, and 400−1800 μM with a 0.12 μM detection limit under the optimized test conditions. The method showed simplicity, excellent selectivity and sensitivity, a wide linearity range, and high stability. The prepared PEC sensor succeeded in the Cr(VI) detection of river water and tap water samples, and it presented good applicability.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsanm.2c00521.Materials and apparatuses, preparation of real samples, UV–vis diffuse-reflectance spectra and Tauc plots of TiO2NTAs and NiCo-LDHs/TiO2NTAs, optimization of the deposition time of NiCo-LDHs and the pH of the supporting electrolyte, photocurrent responses of a TiO2NTAs/Ti photoeletrode to Cr(VI) under UV-light irradiation and the derived calibration curves, photocurrent responses of a NiCo-LDHs/TiO2NTAs/Ti photoelectrode to Cr(VI) under visible-light irradiation and the corresponding derived calibration curves, reproducibility and repeatability of the PEC sensor, and a comparison of Cr(VI) the detection performances of different photoelectrodes (PDF)This article has not yet been cited by other publications.

Sensitive Cr 3+ sensor based on novel poly(luminol- co -1,8-diaminonaphthalene)/CeO 2 /MWCNTs nanocomposites

Study of A Qcm Dimethyl Methylphosphonate Sensor Based on A Zno-Modified Nanowire-Structured Manganese Dioxide Film

Lanthanide Coordination Polymer-Based Composite Films for Selective and Highly Sensitive Detection of Cr2O72- in Aqueous Media.

Novel Thin Film Cadmium Ion Selective Sensor Based on Pulse Laser Deposition

Development of an efficient electrochemical sensing platform based on ter-poly(luminol- o -anisidine- o -toluidine)/ZnO/GNPs nanocomposites for the detection of antimony (Sb 3+ ) ions

PdRuO2/PVP nanomaterial as a highly selective, stable, and applicable potentiometric sensor for the detection of Cr3

Photo-electrochemical sensor based on MoO 3 /ZnCdS Z-type heterojunction for detecting 4-Nitrophenol and hexavalent chromium

Colorimetric Detection of Cr3+ in Aqueous Solution Based on Cofunctionalized Silver Nanoparticles Modified with 4-Nitrobenzenethiol and 4-Mercaptobenzoic Acid

Ce-doped Molybdenum Selenide: a Promising Electrochemical Sensor for Sensitive Determination of P-Nitrophenol

Highly sensitive chemiluminescent sensing of intracellular Al3+ based on the phosphatase mimetic activity of cerium oxide nanoparticles

Ionic Organic Network-based C3-symmetric@Triazine core as a selective Hg+2 sensor

Polyaniline/Ag nanoparticles/graphene oxide nanocomposite fluorescent sensor for recognition of chromium (VI) ions

Multi-responsive Luminescent Sensor Based on Zn (II) Metal-Organic Framework for Selective Sensing of Cr(III), Cr(VI) Ions and P-Nitrotolune

Fabrication of CuS-MoO 3 nanocomposite for high-performance photocatalysis and biosensing

A Stimuli-Responsive Nanogel-Based Sensitive And Selective Fluorescent Sensor For Cr 3 With Thermo-Induced Tunable Detection Sensitivity

Facile synthesis of magnetic intelligent sensors for the pH-sensitive controlled capture of Cr(VI)

A Photoelectrochemical Sensor Based on TiO 2 Nanotube Arrays Decorated with Nickel-Cobalt Layered Double Hydroxides for the Effective and Sensitive Detection of Chromium(VI)

A hybrid composite of Polypyrole/carboxymethyl cellulose/MWCNT fiber with antimicrobial properties and Sb3+ determination on a glassy carbon electrode

Electrochemiluminescence Sensor Based on Partial Sulfonation of Polystyrene with Carbon Nanotubes

A Stable 3D Zn-Coordination Polymer Sensor Based on Dual Luminescent Ligands for Efficient Detection of Multiple Analytes under Acid or Alkaline Environment

A Highly Selective Perylenediimide-Based Chemosensor: “Naked-Eye” Colorimetric and Fluorescent Turn-On Recognition for Al3+