Abstract:Abstract Global warming is one of the most significant issues the world is facing. Capturing carbon dioxide from the atmosphere or industrial processes and storing it in geological formations (carbon capture and storage, CCS) can help counteract climate change. Nevertheless, the interaction between well barrier elements such as cement, casing, tubulars, packers, and valves can lead to possible leakages. To accomplish successful carbon dioxide sequestration, injecting the carbon dioxide in its supercritical state is necessary. The supercritical carbon dioxide can corrode steel and elastomers and react with the calcium compounds in the cement, dissolving them and forming calcium carbonate and bicarbonate in the process. This carbonation can lead to channels forming on the cement-to-rock interface or cracking due to the carbonate precipitation, resulting in a loss of well integrity. This study focusses on finding ways that enable the continuous monitoring of cement integrity, under in-situ conditions, in a lab setup. The construction of an autoclave, capable of withstanding supercritical conditions of carbon dioxide, facilitates the in-situ monitoring. This autoclave also makes CT-scans of the pressurized sample possible, as well as acoustic measurements, using state-of-the-art piezo elements. The first tests will establish a baseline using neat Class G Portland cement to verify the design and sensors. The set up consists of a rock core in the middle of the autoclave surrounded by a cement sheath. A prepared channel in the center of the core expedites the distribution of the carbon dioxide. Once the ability of the sensors to monitor the integrity is verified, different cement compositions and their interaction with supercritical carbon dioxide can be studied. The experimental setup and the procedure discussed here closely simulate the downhole condition. Hence, the results obtained using this setup and procedure is representative of what could be observed downhole. The direction is not to remove the sample from the autoclave for analysis, as is the current industry practice, but to measure cement integrity under in-situ conditions over an extended period of time. Digitalization is powering the in-situ analysis in these tests. The first two tests of this study, using the afore mentioned autoclave, investigated the carbonation behaviour of two Class G Portland cement slurrys, one with a low and one with a high slurry-density. The low-density slurry showed extensive degradation and even the high-density slurry showed carbonation, but only close to the sandstone core. The results from this study can lead to the prevention of leakage of carbon dioxide to the environment and other formations, which defeats the purpose of carbon dioxide sequestration. These results should improve the economics of these wells as well as the health, safety, and environmental aspects.

Calorimetry of amorphous calcium carbonate is correlated with its lithification and durability as synthetic stone—implications for CO2 storage and utilization

Mechanochemical formation of highly stable amorphous calcium carbonate in calcium silicates: Potential long-term storage of CO2 in cement

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

Carboxymethyl Chitosan As a Reversible Template of Calcium Phosphate for Multifunctional Conservation of Carbonate Stone.

Transformation and crystallization energetics of synthetic and biogenic amorphous calcium carbonate

Amorphous Calcium Carbonate is Stabilized in Confinement

Insights into the amorphous calcium carbonate (ACC) → ikaite → calcite transformations

1,3-Diamino-2-hydroxypropane-n,n,n′,n′-tetraacetic Acid Stabilized Amorphous Calcium Carbonate: Nucleation, Transformation and Crystal Growth

Coprecipitation of Crystalline Calcium Silicates and Carbonates from the Hydrothermal Reaction of Pseudowollastonite

Colloidal pathways of amorphous calcium carbonate formation lead to distinct water environments and conductivity

Water Activity Controls the Stability of Amorphous Ca–Mg- and Mg-Carbonates

The Crystallization of Amorphous Calcium Carbonate is Kinetically Governed by Ion Impurities and Water

The synthesis of long-term stable amorphous calcium carbonate in water-free ethylene glycol system without any phase stabilizer

Alterations of Fractures in Carbonate Rocks by CO2-Acidified Brines

Pressure-induced crystallization and densification of amorphized calcium carbonate hexahydrate controlled by interfacial water

Nanoscale Ion Dynamics Control on Amorphous Calcium Carbonate Crystallization: Precise Control of Calcite Crystal Sizes

Stabilization and crystallization mechanism of amorphous calcium carbonate

Microdroplet-Based in Situ Characterization of the Dynamic Evolution of Amorphous Calcium Carbonate During Microbially Induced Calcium Carbonate Precipitation

Real-Time Monitoring of the Effect of CO2 on the Cement Sheath

Energetic and structural studies of amorphous Ca1−Mg CO3·nH2O (0 ⩽x⩽ 1)

Transformation of amorphous calcium carbonate in the presence of magnesium, phosphate, and mineral surfaces