Abstract:Titanium dioxide (TiO2) in the form of thin films has attracted enormous attention for photocatalysis. It combines the fundamental properties of TiO2 as a large bandgap semiconductor with the advantage of thin films, making it competitive with TiO2 powders for recycling and maintenance in photocatalytic applications. There are many aspects affecting the photocatalytic performance of thin film structures, such as the nanocrystalline size, surface morphology, and phase composition. However, the quantification of each influencing aspect needs to be better studied and correlated. Here, we prepared a series of TiO2 thin films using a sol-gel process and spin-coated on p-type, (100)-oriented silicon substrates with a native oxide layer. The as-deposited TiO2 thin films were then annealed at different temperatures from 400 °C to 800 °C for 3 h in an ambient atmosphere. This sample synthesis provided systemic parameter variation regarding the aspects mentioned above. To characterize thin films, several techniques were used. Spectroscopic ellipsometry (SE) was employed for the investigation of the film thickness and the optical properties. The results revealed that an increasing annealing temperature reduced the film thickness with an increase in the refractive index. Atomic force microscopy (AFM) was utilized to examine the surface morphology, revealing an increased surface roughness and grain sizes. X-ray diffractometry (XRD) and UV-Raman spectroscopy were used to study the phase composition and crystallite size. The annealing process initially led to the formation of pure anatase, followed by a transformation from anatase to rutile as the annealing temperature increased. An overall enhancement in crystallinity was also observed. The photocatalytic properties of the thin films were tested using the photocatalytic decomposition of acetone gas in a home-built solid (photocatalyst)-gas (reactant) reactor. The composition of the gas mixture in the reaction chamber was monitored using in situ Fourier transform infrared spectroscopy. Finally, all of the structural and spectroscopic characteristics of the TiO2 thin films were quantified and correlated with their photocatalytic properties using a correlation matrix. This provided a good overview of which film properties affect the photocatalytic efficiency the most.

TiO2 for efficient photocatalytic decomposition of acetaldehyde: An investigation of the effects of annealing temperature, humidity, and binder

Study on in-situ Modification of Vinyl Acetate-Acrylate Latex by Anatase TiO2 Sol

Single platinum atoms on TiO2 photocatalysts for acetaldehyde oxidation under visible-light irradiation

An efficient TiO2 thin-film photocatalyst: photocatalytic properties in gas-phase acetaldehyde degradation

Photocatalytic acetaldehyde oxidation in air using spacious TiO2 films prepared by atomic layer deposition on supported carbonaceous sacrificial templates

Photocatalytic Performance of Sol-Gel Prepared TiO2 Thin Films Annealed at Various Temperatures

In-situ preparation of Ti3C2/Ti3+-TiO2 composites with mosaic structures for the adsorption and Photo-degradation of flowing acetaldehyde under visible light

Ozone-assisted Photocatalytic Oxidation of Gaseous Acetaldehyde on TiO2/H-ZSM-5 Catalysts.

Photocatalytic Degradation of Acetaldehyde on Mesoporous Tio2: Effects of Surface Area and Crystallinity on the Photocatalytic Activity

Improved photocatalytic oxidation performance of gaseous acetaldehyde by ternary g-C3N4/Ag-TiO2 composites under visible light

Effect of Calcination Temperature on Crystal Structure and Photocatalytic Prop- Erty of TiO2/Diatomite Nanoparticles

TiO2/SiO2 Composite Films Immobilized on Foam Nickel Substrate for the Photocatalytic Degradation of Gaseous Acetaldehyde

High Photocatalytic Activity and Stability for Decomposition of Gaseous Acetaldehyde on TiO 2 /al 2 O 3 Composite Films Coated on Foam Nickel Substrates by Sol-Gel Processes

Time-resolved spectroscopic investigation for the practical application of a photocatalytic air purifier

Immobilisation of TiO 2 Films on Activated Carbon Fibres by a Hydrothermal Method for Photocatalytic Degradation of Toluene

The Effect of Calcination Temperature on the Structure and Activity of TiO2/SiO2 Composite Catalysts Derived from Titanium Sulfate and Fly Ash Acid Sludge

Preparations of TiO2 Film Coated on Foam Nickel Substrate by Sol-Gel Processes and Its Photocatalytic Activity for Degradation of Acetaldehyde

Assessing the Adsorption and Photocatalytic Activity of TiO2 Nanoparticles for the Gas Phase Acetaldehyde: A Computational and Experimental Study

Oxygen-deficient WO3 for Stable Visible-Light Photocatalytic Degradation of Acetaldehyde Within a Wide Humidity Range

Acid-assisted hydrothermal synthesis of nanocrystalline TiO2 from titanate nanotubes: influence of acids on the photodegradation of gaseous toluene.

TiO2/TaS2 with Superior Charge Separation and Adsorptive Capacity to the Photodegradation of Gaseous Acetaldehyde