Abstract:The electrochemical nitrate reduction reaction (NO3RR) is considered as a promising strategy to degrade nitrate-containing wastewater and synthesize recyclable ammonia at atmospheric pressure and room temperature. In this work, the copper oxides-derived nano-polycrystalline Cu (NPC Cu) was integrated with Ti3+-self-doped TiO2 nanotube arrays (NTA) to fabricate the NPC Cu/H-TiO2 NTA. Ti3+-self-doped TiO2 NTAs and the NPC Cu facilitate electron transfer and mass transportation and create abundant active sites. The unique nanostructure in which Cu nano-polycrystals interlace with the TiO2 nanotube accelerates the electron transfer from the substrate to surface NPC Cu. The density functional theory calculations confirm that the built-in electric field between Cu and TiO2 improves the adsorption characteristic of the NPC Cu/H-TiO2 NTA, thereby converting the endothermic NO3- adsorption step into an exothermic process. Therefore, the high NO3- conversion of 98.97%, the Faradic efficiency of 95.59%, and the ammonia production yield of 0.81 mg cm-2 h-1 are achieved at -0.45 V vs reversible hydrogen electrode in 10 mM NaNO3 (140 mg L-1)-0.1 M Na2SO4. This well-designed NPC Cu/H-TiO2 NTA as an effective electrocatalyst for the 8e- NO3RR possesses promising potential in the applications of ammonia production.

Durable Electrocatalytic Reduction of Nitrate to Ammonia over Defective Pseudobrookite Fe2TiO5 Nanofibers with Abundant Oxygen Vacancies.

Durable Electrocatalytic Reduction of Nitrate to Ammonia over Defective Pseudobrookite Fe 2 TiO 5 Nanofibers with Abundant Oxygen Vacancies.

Durable Electrocatalytic Reduction of Nitrate to Ammonia over Defective Pseudobrookite Fe<sub>2</sub>TiO<sub>5</sub> Nanofibers with Abundant Oxygen Vacancies

Defective CuO-rich CuFe2O4 Nanofibers Enabled Efficient Synergistic Electrochemical Reduction of Nitrate to Ammonia

High-Performance Electrochemical Nitrate Reduction to Ammonia under Ambient Conditions Using a FeOOH Nanorod Catalyst

Defective CuO-rich CuFe2O4 Nanofibers Enable the Efficient Synergistic Electrochemical Reduction of Nitrate to Ammonia

High-Performance Electrocatalytic Reduction of Nitrite to Ammonia under Ambient Conditions on a FeP@TiO<sub>2</sub> Nanoribbon Array

Deficient Tin oxide nanofibers with regulated valence for efficient nitrate reduction to ammonia

Nano-Polycrystalline Cu Layer Interlaced with Ti3+-Self-Doped TiO2 Nanotube Arrays as an Electrocatalyst for Reduction of Nitrate to Ammonia

Heterogenous Cu@ZrO2 nanofibers enable efficient electrocatalytic nitrate reduction to ammonia under ambient conditions

Co3O4 nanoparticles embedded in porous carbon nanofibers enable efficient nitrate reduction to ammonia

Boosting Electrocatalytic Reduction of Nitrate to Ammonia over Co3O4 Nanosheets with Oxygen Vacancies

Electroreduction of Nitrate to Ammonia on Palladium–Cobalt–Oxygen Nanowire Arrays

Interfacial Defect Engineering Triggered by Single Atom Doping for Highly Efficient Electrocatalytic Nitrate Reduction to Ammonia

NiMoO 4 nanorods with oxygen vacancies self-supported on Ni foam towards high-efficiency electrocatalytic conversion of nitrite to ammonia

High-performance Electrochemical Nitrate Reduction to Ammonia under Ambient Conditions Using NiFe2O4 Nanosheet Arrays

Co<sub>3</sub>O<sub>4</sub> nanoparticles embedded in porous carbon nanofibers enable efficient nitrate reduction to ammonia

NiMoO4 Nanorods with Oxygen Vacancies Self-Supported on Ni Foam Towards High-Efficiency Electrocatalytic Conversion of Nitrite to Ammonia.

Ni Doping Enabled Improvement in Electrocatalytic Nitrite-to-ammonia Conversion over TiO2 Nanoribbon

Cr3C2 Nanoparticles Decorated Carbon Nanofibers for Efficient Nitrate Reduction to Ammonia at Ambient Conditions.

Fe3C Nanoparticles Decorated 3D Nitrogen-Doped Carbon Foam As a Highly Efficient Electrocatalyst for Nitrate Reduction to Ammonia