Abstract:Background: Clinical monitoring of planar pressure is vital in several pathological conditions, such as diabetes, where excess pressure might have serious repercussions on health of the patient, even to the extent of amputation. Objective: The main objective of this paper is to experimentally evaluate the combined application of the Fibre Bragg Grating (FBG) and the lead zirconate titanate (PZT) piezoceramic sensors for plantar pressure monitoring during walk at low and high speeds. Methods: For fabrication of the pressure sensors, the FBGs are embedded within layers of carbon composite material and stacked in an arc shape. From this embedding technique, average pressure sensitivity of 1.3 pm/kPa and resolution of nearly 0.8 kPa is obtained. These sensors are found to be suitable for measuring the static and the low-speed walk generated foot pressure. Simultaneously, PZT patches of size 10 × 10 × 0.3 mm were used as sensors, utilizing the d<formula>_{33}</formula> (thickness) coupling mode. A sensitivity of 7.06 mV/kPa and a pressure resolution of 0.14 kPa is obtained from these sensors, which are found to be suitable for foot pressure measurement during high speed walking and running. Both types of sensors are attached to the underside of the sole of commercially available shoes. In the experiments, a healthy male subject walks/runs over the treadmill wearing the fabricated shoes at various speeds and the peak pressure is measured using both the sensors. Commercially available low-cost hardware is used for interrogation of the two sensor types. Results: The test results clearly show the feasibility of the FBG and the PZT sensors for measurement of plantar pressure. The PZT sensors are more accurate for measurement of pressure during walking at high speeds. The FBG sensors, on the other hand, are found to be suitable for static and quasi-dynamic (slow walking) conditions. Typically, the measured pressure varied from 400 to 600 kPa below the forefoot and 100 to 1000 kPa below the heel as the walking speed varied from 1 kilometer per hour (kmph) to 7 kmph. Conclusions: When instrumented in combination, the two sensors can enable measurements ranging from static to high speed conditions Both the sensor types are rugged, small sized and can be easily embedded in commercial shoes and enable plantar pressure measurement in a cost-effective manner. This research is expected to have application in the treatment of patients suffering from diabetes and gonarthrosis.

Shoes With Integrated Electrodes to Measure Floor Impedance and Its Application to Automatic Pathway Classification

Validation of a smart shoe for estimating foot progression angle during walking gait.

Proportion-based Fuzzy Gait Phase Detection Using the Smart Insole

Flexible Insole Sensors with Stably Connected Electrodes for Gait Phase Detection

Concept studies and application development of textile integrated dielectric elastomer sensors for smart shoe technologies

Gait Subphases Classification Based on Hidden Markov Models using in-shoes Capacitive Pressure Sensors: Preliminary Results

A Low-Cost, Portable, and Wireless In-Shoe System Based on a Flexible Porous Graphene Pressure Sensor

On Predicting Transitions to Compliant Surfaces in Human Gait via Neural and Kinematic Signals

Foot type classification using sensor-enabled footwear and 1D-CNN

Recent Innovations in Footwear Sensors: Role of Smart Footwear in Healthcare -- A Survey

Design of Smart Walking Shoe for Visually Impaired People

Ambulation Mode Classification of Individuals with Transfemoral Amputation through A-Mode Sonomyography and Convolutional Neural Networks

Combined application of FBG and PZT sensors for plantar pressure monitoring at low and high speed walking

A Wearable Computer Vision System With Gimbal Enables Position-, Speed-, and Phase-Independent Terrain Classification for Lower Limb Prostheses

A Plantar Pressure Detection and Gait Analysis System Based on Flexible Triboelectric Pressure Sensor Array and Deep Learning

TriboGait: A Deep Learning Enabled Triboelectric Gait Sensor System for Human Activity Recognition and Individual Identification

Smart Insoles for Gait Analysis Based on Meshless Conductive Rubber Sensors and Neural Networks

Deep learning approach to estimate foot pressure distribution in walking with application for a cost-effective insole system

Estimation of Ground Contacts from Human Gait by a Wearable Inertial Measurement Unit using machine learning

Recent Innovations in Footwear and the Role of Smart Footwear in Healthcare-A Survey

A Neural Network-Based Gait Phase Classification Method Using Sensors Equipped on Lower Limb Exoskeleton Robots