Modeling a Zero-Emissions Hydrogen-Powered Catamaran Ferry Using AVL Cruise-M Software

Luca Micoli,Tommaso Coppola,Roberta Russo,Vincenzo Sorrentino
DOI: https://doi.org/10.3390/jmse12050770
IF: 2.744
2024-05-04
Journal of Marine Science and Engineering
Abstract:This work focuses on the modeling of a zero-emissions, high-speed catamaran ferry employing a full-electric propulsion system. It addresses the global emphasis on full-electric vessels to align with IMO regulations regarding ship emissions and energy efficiency improvement. Using the AVL Cruise-M software, this research verified the implementation of an onboard fuel cell power-generating system integrated with a propulsion plant, aiming to assess its dynamic performance under load variations. The catamaran was 30 m long and 10 m wide with a cruise speed of 20 knots. The power system consisted of a proton-exchange membrane fuel cell (PEM) system, with a nominal power of 1600 kWe, a battery pack with a capacity of 2 kWh, two 777 kW electric motors, and their relative balance of the plant (BoP) subsystems. The simulation results show that the battery effectively supported the PEM during the maneuvering phase, enhancing its overall performance and energy economy.
oceanography,engineering, marine, ocean
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to design and verify a zero - emission hydrogen - powered catamaran fast ferry to meet the regulations of the International Maritime Organization (IMO) regarding ship emissions and energy efficiency improvement. Specifically, the research simulated a catamaran ferry equipped with a fully - electric propulsion system through AVL Cruise - M software, aiming to evaluate the dynamic performance of the on - board fuel cell power generation system integrated with the propulsion device, especially under load changes. ### Research Background and Problem Description With the global emphasis on sustainable development, the shipping industry is under pressure to reduce carbon emissions and its dependence on traditional fuels, so it is necessary to explore environmentally - friendly alternative fuels. Hydrogen (H₂) as a potential clean energy has attracted much attention in the shipping field. However, there are many challenges in the storage and use of hydrogen, such as low volumetric energy density, flammability, etc. To address these challenges, researchers propose to combine hydrogen fuel cells (PEM) with battery systems to form a hybrid power system to improve energy efficiency and ensure safe and reliable operation. ### Specific Research Contents 1. **Ship Type Selection**: The research selected a high - speed passenger ferry with a length of 30 meters, a width of 10 meters and a cruising speed of 20 knots as the research object. 2. **Power System Design**: - **Fuel Cell System**: A proton - exchange - membrane fuel cell (PEM) with a rated power of 1,600 kWe was adopted. - **Battery System**: An lithium - ion battery pack with a capacity of 2 kWh was equipped. - **Electric Motor**: Two 777 - kW electric motors were used to drive the two half - hulls of the catamaran. 3. **Simulation Tool**: AVL Cruise - M software was used for simulation to evaluate the system response and fuel consumption under different load conditions. ### Main Objectives - **Performance Evaluation**: Verify the dynamic performance of the hydrogen - fuel - cell - and - battery hybrid power system, especially when the load changes. - **Energy Economy**: Evaluate the supporting role of the battery for the fuel cell during the operation process and improve the overall energy efficiency. - **Safety and Reliability**: Ensure the safety and reliability of the hybrid power system in practical applications and comply with the relevant regulations of the IMO. Through these studies, the paper hopes to provide valuable references for the design and application of future zero - emission ships and promote the application and development of hydrogen - fuel - cell technology in the shipping industry.