Abstract:Determination of elemental concentrations in biological tissue is fundamental to many environmental studies. Analytical methods typically used to quantify concentrations in such studies have minimum sample volumes that necessitate lethal or impactful collection of tissues. Laser ablation inductively coupled mass spectrometry (LA-ICP-MS) has small sample volume requirements and offers environmental practitioners an opportunity to employ low-impact sample collection methods. Environmental applications of LA-ICP-MS are limited by the lack of validated methods, partly due to the need for dry samples and scarcity of matrix-matched certified reference materials (CRMs). This study validates an LA-ICP-MS method to determine concentrations of 30 elements in soft biological tissue (fish ovary and muscle). Tissue samples (median: 0.48 grams (g); inter-quartile range: 0.30 g to 0.56 g wet weight) were dehydrated, powdered, compressed into pellets (weighing approximately 0.03 g) and analyzed using LA-ICP-MS alongside three matrix-matched CRMs. The method yielded concentration determinations for CRM elements that were typically accurate to within 30% of theoretical concentrations, and precise (relative standard deviation <20%). These results were repeatable: accuracy rarely deviated from theoretical values by more than 20%, and precision rarely exceeded 33%. Determinations for biological samples were replicable irrespective of tissue (ovary or muscle). There was good linearity between analyte signal strength and theoretical concentration (median R2 ≥ 0.981 for all elements) across ranges typically encountered in environmental studies. Concentrations could not be consistently obtained (i.e., determined concentrations were typically below detection limits) for boron, vanadium, molybdenum, and cadmium in muscles, and arsenic in both ovaries and muscles; however, detection limits were sufficiently low for most environmental contexts. Further methodological refinement could include the incorporation of spiked standards to extend linear ranges, and fine-tuning instrument parameters to obtain smoother signal intensities for rare elements. The method presented promotes the use of low-impact sample collection methods while enabling high-quality determinations of elemental concentrations in biological tissues.

Performance assessment of elemental characterization in environmental samples at the KRISS–KAERI INAA laboratory

Multielemental analysis of Korean geological reference samples by INAA, ICP-AES and ICP-MS

Improvement of analytical capabilities of neutron activation analysis laboratory at the Colombian Geological Survey

Elemental analysis of SRM 1547 peach leaves, 1573a tomato leaves, and 1570a spinach leaves

[Convertibility of the Data Determined by ICP-AES and FAAS for Soil Available K and Na].

High-energy interference-free K-lines synchrotron X-ray fluorescence microscopy of rare earth elements in hyperaccumulator plants

LA-ICP-MS ANALYSIS OF TRACE ELEMENTS IN SILICATE MINERALS ON ICP-MS NEXION 300S MASS SPECTROMETER WITH NWR 213 ATTACHMENT FOR LASER ABLATION: METHODOLOGICAL ASPECTS

Experimental assessment of elemental analyzer isotope ratio mass spectrometry normalization methodologies for environmental stable isotopes

A Non-Matrix-Matched Calibration Method for In Situ Major and Trace Element Analysis of Scheelite by Nanosecond LA-ICP-MS

Use of Instrumental Neutron Activation Analysis to investigate the distribution of trace elements among subsamples of solid materials

Experimental Investigation on the Method of Measuring 9 Elements in Si - Al - Ba Alloy with ICP - AES Int Std

Data Normalization and Quality Control of Light Element Stable Isotope Analyses by Means of Continuous Flow Isotope Ratio Mass Spectrometry

Inter‐laboratory Comparison: Quantitative Surface Analysis of Thin Fe‐Ni Alloy Films

ANALYSIS OF TRACE RARE EARTH ELEMENTS IN MISCH METAL BY MEANS OF ITP-PIXE METHOD

Performance of hybrid angle-energy dispersive X-ray diffraction and fluorescence portable system for non-invasive surface-mineral identification in Archaeometry

Suitability of XRF for Routine Analysis of Multi-Elemental Composition: A Multi-Standard Verification

Optimization and Applications of Instrumental and Preconcentration Neutron Activation Analysis Methods for Rapid Determination of Selected REE by Utilizing their Short‐Lived Activation Products

Method validation for a multi-element panel in serum by inductively coupled plasma mass spectrometry (ICP-MS)

Determination of Elemental Composition in Soft Biological Tissue Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry: Method Validation

High precision potassium isotope analysis of geological samples using MC-ICP-MS

Comparison of the standards for absorbed dose to water of the IAEA and the KRISS, Korea in accelerator photon beams