Abstract:Sulfide-based all-solid-state Li-ion batteries (ASSLIBs) are recognized as promising next-generation batteries, due to its advantage of high energy density, high safety and high Li+ diffusivity in sulfide solid electrolytes (SEs). However, interfacial instability between cathode (like LiCoO2) and sulfide SEs hinders its commercial applica-tions. Herein, a simple mechanochemical strategy, which mechanically mixed polyanionic borate precursor and Li2CO3 residue on LiCoO2 (LCO) cathode with subsequent thermochemical reactions, was proposed to achieve analogous "solid electrolyte interphase (SEI)" to address such issues. The artificial SEI consists of crystalline LiBa (B3O5)3 (LBBO), Li3BO3 (LBO) and amorphous lithium boron oxide (Li-B-O). Therein, the former two endow high interfacial stability with SEs and ionic conductivity respectively, while the latter presented in the former interspace isolated the LCO cathode from Li10GeP2S12 (LGPS) solid electrolyte and constructed a continuous interlayer with LBBO and LBO. According to the phase diagram and direct observation through TEM, it is confirmed that a suitable ratio of raw LBBO precursor and Li2CO3 residue can realize an appropriate proportion of LBO to balance the interfacial stability and the diffusion of Li+ in obtained artificial interlayer, which enables high cyclability and rate performance in LCO/LGPS/Li-In ASSLIBs. Specifically, SEI with 9.4 mol.% LBO boosts an initial discharge capacity of 153.8 mAh g+1 (2.6-4.3 V (vs. Li/Li+), 0.1 C) with 74.4 % retention (150 cycles) and an excellent rate capability of 92.9 and 56.1 mAh g+1 at 1 C and 2 C respectively. Upon increased cut-off voltage of 4.5 V, an initial 167.3 mAh g+1 capacity (0.2 C) and 64.7 % retention (150 cycles) can also be ach-ieved. The present strategy utilizing mechanochemical reactions between polyanionic borate and Li2CO3 residue to construct analogous SEI will offer fresh insights to stabilize the electrode/electrolyte interface of ASSLIBs derived from diverse polyanionic-type borates or phosphates, which can be widely used in other all-solid-state batteries with various cathodes and electrolytes.

In-situ synthesis of barium sulfate as inorganic expander of lead-acid cells

A Dual‐Insertion Type Sodium‐Ion Full Cell Based on High‐Quality Ternary‐Metal Prussian Blue Analogs

A Dual-Insertion Type Sodium-Ion Full Cell Based on High-Quality Ternary-Metal Prussian Blue Analogs

Stabilizing Zn2SiO4 Anode by a Lithium Polyacrylate Binder for Highly Reversible Lithium-Ion Storage.

Synthesis and characterisation of tribasic lead sulphate as the negative active material of lead-acid battery

Effect of BaSO4 additive on cycling performance of ZnS/C–SnO2 for advanced sodium-ion batteries

Mechanochemical Reactions Between Polyanionic Borate and Residue Li2CO3 on LiCoO2 to Stabilize Cathode/electrolyte Interface in Sulfide-Based All-Solid-state Batteries

Amino Acid Based Ionic Liquids for Revitalization of Sulfated Lead Anodes

An Optimized Preparation Procedure of Tetrabasic Lead Sulfate for Lead-Acid Batteries

In Situ Formed Continuous and Dense Inorganic Borate‐Based SEI for High‐Performance Li‐Metal Batteries

Synergistic Bimetallic Effects of BiSb Anodes Enable Long‐Stable Sodium Storage

Stabilizing Zn 2 SiO 4 Anode by a Lithium Polyacrylate Binder for Highly Reversible Lithium-Ion Storage

Effect of Polyaniline-Modified Lignosulfonate Added to the Negative Active Material on the Performance of Lead-Acid Battery

Botryoidal Pb/PbO@C nanocomposite derived from eggplant biomass as negative electrode additives for long-cyclability lead-acid batteries

In-situ carbon encapsulated Pb/PbO nanoparticles derived from spent lead paste for lead-carbon battery

Barium ions Act as Defenders to Prevent Water from Entering Prussian blue Lattice for Sodium-Ion Battery

Highly branched amylopectin binder for sulfur cathodes with enhanced performance and longevity

A Simple Room-Temperature Refurbishment Method for Sulfated Lead-Acid Batteries Using Ammonium Acetate Treatment

Water‐Soluble Cross‐Linking Functional Binder for Low‐Cost and High‐Performance Lithium–Sulfur Batteries

Bioinspired Binders Actively Controlling Ion Migration and Accommodating Volume Change in High Sulfur Loading Lithium–Sulfur Batteries

In-situ Polymerized Cross-Linked Binder for Cathode in Lithium-Sulfur Batteries