Abstract:The AC losses, the current density and the magnetic field are important variables to design devices made of High Temperature Superconductors (HTS). These variables are often numerically computed using a transient finite element analysis even though the interest may lay in the steady-state regime of the device. The need for solving time-dependent variables has led to improve the computation time with efficient finite element models (FEM) relying on different formulations. These transient FEM are computationally slow and demanding in terms of resources. In the present work, an alternative path is taken with the development of a frequency-domain FEM using a phasor representation to alleviate the computation burden. This model does not have the versatility of the transient models. However, it can generate the initial steady-state conditions for a subsequent transient analysis. It is perfectly adapted to study the steady-state regime of HTS devices operated in AC conditions. In this phasor modelling approach, the Root Mean Square (RMS) resistivity of the superconductor is introduced. It is subsequently approximated by an exponential function introducing a factor to ease its implementation in the commercial software COMSOL Multiphysics with the most recent and fastest formulations T-A and J-A. The case studies encompass single BSCCO and REBCO tapes as well as a CORC cable or specifically, in the present work, a CORT (Conductor on Round Tube). The results of the time- and frequency-domain FEM simulations are compared against experimental data. The comparison of the models' results is carried out comparing the current density distributions as well as the AC losses. The comparison against experimental data is only conducted on the AC losses. In the present case, it is used to quantify thoroughly the accuracy of the numerical results compared to the measurements. A reasonable agreement between those results and the experimental data was found.

Use of the J-A Approach to Model Homogenized 2G Tape Stacks and HTS Bulks

The T-A formulation: an efficient approach to model the macroscopic electromagnetic behaviour of HTS coated conductor applications

Calculation of AC losses in stacks and coils made of second generation high temperature superconducting tapes for large scale applications

Real-time simulation of large-scale HTS systems: multi-scale and homogeneous models using T-A formulation

Self-consistent Modeling of the $I_c$ of HTS Devices: How Accurate do Models Really Need to Be?

Numerical calculations of high temperature superconductors with the J-A formulation

2-D Thin-Shell Model Based on the - -Formulation for Modeling HTS Tapes in COMSOL Multiphysics

Foil Conductor Model for Efficient Simulation of HTS Coils in Large Scale Applications

Numerical models for AC loss calculation in large-scale applications of HTS coated conductors

An efficient HTS electromagnetic model combining thin-strip, homogeneous and multi-scale methods by T-A formulation

An FEM framework for modeling forces between NdFeB magnets and HTS bulks

A frequency-domain finite element model for simulating high-temperature superconductors using the J-A and T-A formulations

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Superconducting Magnetic Bearings Simulation using an H-formulation Finite Element Model

3D homogenization of the T-A formulation for the analysis of coils with complex geometries

Ac Losses in Hts Tapes and Devices with Transport Current Solved Through the Resistivity-Adaption Algorithm

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Modeling of High- Tc Superconducting Bulk using Different Jc- T Relationships over Dynamic Permanent Magnet Guideway

The Optimal Design of a 300~MJ Superconducting Magnet Using HTS Tapes

Reconsideration of Nonphysical Solution in Jiles–Atherton Model for Real-Time Hysteresis Estimation

2D axisymmetric electromagnetic modeling of HTS coils based on T-A formulation with modified Newman boundary conditions