Abstract:In recent years, remarkable interest has been focused on the Friction Stir Welding (FSW) process, by academic as well as industrial research groups. Conceptually, the FSW process is quite simple: a non-consumable rotating tool is plunged between the adjoining edges of the parts to be welded and moved along the desired weld line. Frictional and viscous heat generation increases the work piece temperature, softening the processing material and forcing it to flow around the pin. Although FSW has been effectively applied in welding of several materials, such as copper, steel, magnesium, and titanium, considerable attention is still focused on aluminum welding, in particular for transport applications. Recent literature clearly evidenced microstructural variations in the stir zone, imputable to continuous dynamic recrystallization phenomena, leading to the formation of a finer equiaxed grains. Moreover, depending on the specific alloy, thermal cycles can induce coarsening or dissolution of precipitates in the thermo-mechanically affected zone (TMAZ) and in the heat affected zone (HAZ). The influence of the aforementioned microstructural aspects on mechanical properties and formability of FSWed assemblies is also well recognized. The aim of this paper is to numerically and experimentally investigate the influence of process parameters, namely rotating speed and welding speed, on microstructural aspects in AA2024-T3 friction stir butt welds. A three-dimensional Computational Fluid Dynamic (CFD) model has been implemented to simulate the process. A viscoplastic material model, based on Wright and Sheppard modification of the constitutive model initially proposed by Sellars and Tegart has been implemented in the commercial package ANSYS CFX, considering an Eulerian framework. Tool-workpiece interaction has been modeled assuming partial sticking/sliding condition, and incorporating both frictional and viscous contributions to the heat generation. Microstructural aspects have been numerically predicted using the Zenner-Holloman parameter and experimentally measured by means of conventional metallographic techniques. Satisfactory agreement has been found between simulated and experimental results. The influence of process parameters on mechanical properties has also been highlighted.

New aspects of solid-state welding in the aluminium accumulative roll bonding

Review on the Solid-State Welding of Steels: Diffusion Bonding and Friction Stir Welding Processes

Effect of surface oxide layers in solid-state welding of aluminium alloys – review

Analysis of the Strain Distribution and Texture Measurements in Asymmetric Rolling (AR) and Asymmetric Accumulative Roll Bonding (AARB)

Interface bonding mechanism and microstructure evolution in current-induced solid-state welding of Zr–Sn/Zr–Sn–Nb alloy

Effect of Asymmetric Accumulative Roll-Bonding process on the Microstructure and Strength Evolution of the AA1050/AZ31/AA1050 Multilayered Composite Materials

Steel–Steel Laminates Manufactured via Accumulative Roll Bonding

Dissimilar Friction Stir Lap Welding of Aluminium to Steel: Influence of Alloy Type and Sheet Thickness on Strain Distribution and Failure Location

Microstructural evolutions and mechanical properties of multilayered 1060Al/Al–Al2O3 composites fabricated by cold spraying and accumulative roll bonding

An investigation of electrical-assisted solid-state welding/bonding process for thin metallic sheets: Experiments and modeling

Accumulative Roll-Bonding of Aluminum Alloys and Composites: an Overview of Properties and Performance

Tailoring the Microstructure of an AA5754 Aluminum Alloy by Tuning the Combination of Heat Treatment, Friction Stir Welding, and Cold Rolling

Micro-adhesive wear and microhardness behavior of friction stir welded 2524-T3 aluminium alloy

Role of Strain Path Change on Texture and Microstructure of Accumulative Roll-Bonding (ARB) Processed Aluminum: A Comparative Study of Unidirectional and Reverse ARB

Microstructural Evolution During Friction Stir Welding of Ultrafine Grained Al Alloys

Roll bonding characteristics of the Mg/Zn/Cu/Al multilayered composite produced by the ARB process

A Numerical and Experimental Analysis of Microstructural Aspects in AA2024-T3 Friction Stir Welding

An experimental study on lap joining of multiple sheets of aluminium alloy (AA 5754) using friction stir spot welding

Joining thin galvanized low carbon steel sheet to AA6056-T4 by resistance spot welding and adhesive weld bounding

Evolution of texture and microstructure during accumulative roll bonding of aluminum AA5086 alloy

Experimental Study of Steel–Aluminum Joints Made by RSW with Insert Element and Adhesive Bonding