A new anisotropic thermal conductivity equation for h-BN/polymer composites using finite element analysis

Yingying Sun,Luyao Zhou,Yu Han,Liu Cui,Lin Chen

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.120157

IF: 5.2

2020-10-01

International Journal of Heat and Mass Transfer

Abstract:<p>A new anisotropic thermal conductivity equation of h-BN/polymer composites was successfully derived from a series of numerical calculation and mathematical analysis. A simple finite element model of polymer composite filled with oriented hexagonal boron nitride (h-BN) was firstly established to simulate its thermal transportation. This numerical model was validated by other thermal conductive models and experimental data. Then the influence of many factors on the anisotropic thermal conductivity of h-BN/polymer composites was mathematically investigated, including matrix thermal conductivity, h-BN thermal conductivity, size, aspect ratio and oriented angles, interfacial thermal resistance, and non-uniform factors. It is found that thermal conductivity of polymer composites increases with filler content as a power function; decreases with interfacial thermal resistance in a negative power function form; increases almost proportionally with thermal conductivity of polymer matrix; does not change with h-BN thermal conductivity when the in-plane thermal conductivity of h-BN is higher than 100 W·m⁻¹·K⁻¹ and out-of-plane thermal conductivity of h-BN is higher than 2 W·m⁻¹·K⁻¹; and does not change with h-BN size under the same aspect ratio. With the increasing h-BN aspect ratio, in-plane thermal conductivity of composites increases, while out-of-plane thermal conductivity decreases. The change ranges of position and tilt angle correction factors were also obtained.</p>

engineering, mechanical,thermodynamics,mechanics