Abstract:Background: Coated implant components for total knee arthroplasties are primarily used for metal-sensitive patients and are offered by different manufacturers. However, there is only little knowledge with respect to their coating design and supposed superior tribological performance. Our aim was to compare retrieved coated implants by identifying present damages, critical factors influencing the coating durability and their correlation to the clinical performance. Materials and methods: 28 retrieved knee endoprostheses from nine different manufacturers were analyzed for potential surface defects as well as the coating strategy for each manufacturer. The coating designs were investigated on preserved regions with regard to substrate and coating material, layer thickness and roughness using scanning electron microscopy and confocal microscopy. Furthermore, the mechanical properties and adhesive strength of the layer were evaluated by nanoindentation and scratch testing. The friction performance of the coatings against ultra-high molecular weight polyethylene (UHMWPE) was investigated in a tribological test. In addition, clinical data were collected and evaluated for all patients. Results: Our cohort of 28 retrieved knee endoprostheses exhibited different damage patterns in the articulating area with an incidence of 79% for discoloration and 21% for coating delamination. All coatings presented droplets, macropores and pinholes in preserved areas, which can be attributed to the coating and post-polishing processes. Interestingly, the adhesive strength was significantly increased by 60.4% for titanium nitride coatings on TiAl6V4 alloy in comparison to CoCr28Mo6 substrates. The friction behavior of titanium nitride coatings against UHMWPE is similar to uncoated CoCr28Mo6 alloy and lowest for the ZrN multi-layer coating with a reduction of 14%. Discussion: This study shows that manufacturing related coating deposition defects can cause wear due to adhesive failure and corrosion underneath the coating layers. Adhesive strength was identified as a critical factor for coating durability. Minor adhesive strength was present on CoCr28Mo6 cast alloy in comparison to good adhesion of Ti-based coatings on TiAl6V4 wrought alloy. Based on our findings, this is consistent to higher prevalence rates of CoCr28Mo6/TiNbN coatings for gross delamination and pitting damage with increasing implantation time.

Engineering of multilayered coating on additively manufactured Ti-6Al-4V porous implants to promote tribological and fatigue performances

Experimental investigation of tribo-mechanical and chemical properties of TiN PVD coating on titanium substrate for biomedical implants manufacturing

Mechanical and bioactive properties of PVD TiO2 coating modified PEEK for biomedical applications

Evaluation of tribological and biological properties of Ti6Al4V coated with Si3N4/ND nanoparticles for orthopedic applications: a comprehensive analysis

Mechanical Tests, Wear Simulation and Wear Particle Analysis of Carbon-Based Nanomultilayer Coatings on Ti6Al4V Alloys As Hip Prostheses

Surface modification of Ti6Al4V alloy via advanced coatings: Mechanical, tribological, corrosion, wetting, and biocompatibility studies

Influence of Process Parameters on the Tribological Behavior of PEO Coatings on CP-Titanium 4+ Alloys for Biomedical Applications

Electrochemical deposition multi-walled carbon nanotube coatings on the surface of Ti6Al4V alloy for enhancing its biotribological properties

Mechanical, biocorrosion, and antibacterial properties of nanocrystalline TiN coating for orthopedic applications

Advancements in biomedical coatings: A comprehensive review of DC magnetron sputtering on Ti–6Al–4V alloy

Study of TiCuN/ZrN multilayer coatings with adjustable combination properties deposited on TiCu alloy

Micro-Arc Oxidation Enhances Mechanical Properties and Corrosion Resistance Of Ti-6Al-7Nb Alloy

Toward improved mechanical, tribological, corrosion and in-vitro bioactivity properties of mixed oxide nanotubes on Ti-6Al-7Nb implant using multi-objective PSO

Surface Modification and Tribological Performance of Calcium Phosphate Coatings with TiO2 Nanoparticles on VT1-0 Titanium by Micro-Arc Oxidation

New surface modification for Ti-6Al-7Nb alloy: oxygen diffusion hardening (ODH)

2D magnesium phosphate resorbable coating to enhance cell adhesion on titanium surfaces

In situ reactive multi-material Ti6Al4V-calcium phosphate-nitride coatings for bio-tribological applications

Development of Microstructure and Properties of Multicomponent MoS2/HA/PEEK Coatings on a Titanium Alloy Via Electrophoretic Deposition and Heat Treatment

Topographical Hard Protective Coating for Joint Replacement Implants

Effect of different laser texture configurations on improving surface wettability and wear characteristics of Ti6Al4V implant material

Retrieval study of commercially available knee implant coatings TiN, TiNbN and ZrN on TiAl6V4 and CoCr28Mo6