Abstract:Most solar cookers usually perform a single task of solely cooking food during sunshine hours. Solar cookers coupled with thermal energy storage (TES) material for off-sunshine cooking are usually expensive and require complex engineering designs, and cannot be used for dual purposes, for example, solar water heating and cooking. In this paper, a solar cooker that can perform dual tasks of cooking as well as storing thermal energy to be used during off-sunshine periods is presented. The experimental setup is composed of a parabolic dish, a solar receiver coupled with a flat plate and an oil-circulating copper coil for charging and discharging a storage tank. The objective of the experiment is to evaluate the energy and exergy thermal performance parameters of the dual-purpose system during charging and discharging cycles. The effect of the flow rate and the mass of the load are investigated while using sunflower oil as both the heat transfer fluid and the storage material. Charging and discharging experiments are conducted using four different flow rates (2, 3, 4, 5 mL/s), and with different masses (0.5, 1, 1.5, 2.0 kg) with water and sunflower oil as the test loads. The charging results show that the average energy and exergy rates as well as their corresponding efficiencies increase with an increase in the charging flow rate. On the other hand, the increase in the mass load tends to decrease marginally the average charging energy and exergy rates for water, and their corresponding efficiencies. For sunflower oil, the average charging energy and exergy rates and efficiencies showed a more pronounced decrease with an increase in the mass. Water generally shows higher charging and discharging energy and exergy efficiencies compared to sunflower oil with an increase in the flow rate. For discharging results, the correlations between the energy and exergy thermal performance parameters with respect to the flow rate and the heating load are not well defined possibly due to different initial storage tank temperatures at the onset of discharging and the inefficient discharging process which needs to be optimized in future.

Experimental studies on evacuated tube collector with in-built energy storage - Waste car engine oil as sensible heat storage medium

Experimental Investigations on Dynamic Performance of Organic Rankine Cycle Integrated with Latent Thermal Energy Storage under Transient Engine Conditions

Optimizing the thermal performance and heat losses of self-stored U-tube based ETC for residential water heating applications: A combined experimental and theoretical approach

Experimental evaluation for enhancement of small-scale concentrated solar power ‎systems – a case study ‎for solar cooking

Comparative thermal performance: An experimental study of self-stored U-pipe vacuum tube collectors operated in closed mode

Performance Optimization of Thermal Energy Storage Based Solar Collector

Computational Fluid Dynamics Modeling of a Heat Pipe Evacuated Tube Solar Collector Integrated With Phase Change Material

Experimental study on heat pipe evacuated tube solar collector for residential use with various condenser configurations

Experimental Investigation of Integrated Energy Storage on Thermal Performance Enhancement of Evacuated Glass-Thermal Absorber Tube Collector (EGATC) for Air Heating Application

Experimental and Numerical Studies of Thermal Energy Storage using Paraffin Wax Phase Change Materials

Experimental study of parabolic trough collector in series having a concentric copper tube in evacuated tube for air heating

Recent Advancements in Evacuated Tube Solar Water Heaters: A Critical Review of the Integration of Phase Change Materials and Nanofluids with ETCs

Thermal performance evaluation of a solar air heater integrated with helical tubes carrying phase change material

Study on carnauba wax as phase-change material integrated in evacuated-tube collector for solar-thermal heat production

Enhanced performance assessment of an integrated evacuated tube and flat plate collector solar air heater with thermal storage material

A Parametric Study on the Efficiency of a Solar Evacuated Tube Collector Using Phase Change Materials: A Transient Simulation

Optimization of thermal efficiency on solar parabolic collectors using phase change materials - experimental and numerical study

Experimental Energetic and Exergetic Performance of a Combined Solar Cooking and Thermal Energy Storage System

Thermodynamic analysis on using titanium oxide/oil nanofluid integrated with porous medium in an evacuated tube solar water heater

Nano-thermal energy storage system for application in solar cooker

Performance analysis of a solar dryer integrated with thermal energy storage using PCM-Al2O3 nanofluids