A new blind source separation framework for signal analysis and artifact rejection in functional Near-Infrared Spectroscopy

Alexander von Lühmann,Zois Boukouvalas,Klaus-Robert Müller,Tülay Adalı

DOI: https://doi.org/10.1016/j.neuroimage.2019.06.021

IF: 5.7

2019-10-01

NeuroImage

Abstract:<h5>Graphical abstract</h5>

radiology, nuclear medicine & medical imaging,neurosciences,neuroimaging

What problem does this paper attempt to address?

Rapid Second-Older Blind Source Separation Algorithm for Vibration Signals

叶红仙,杨世锡,杨将新

DOI: https://doi.org/10.3969/j.issn.1000-3835.2008.07.018

2008-01-01

Abstract:A rapid second-order blind identification algorithm was developed to separate temporally correlated sources with different normalized spectra based on the original algorithm of blind source separation. The set of convariance matrices of the original algorithm was substituted by their average matrix to obtain their' average eigenstructure'. And the problem of joint diagonalization of several matrices was reduced to one matrix diagonalization. So the cost of the computation was reduced. In contrast to the original algorithm, the modified algorithm enhances the speed of computation obviously without leading to the degeneration of separation performance. The numerical simulations and real experiments illustrate the effectiveness and rapidness of the proposed method. It is possible to apply the method to real-time signal analysis due to its rapidness and efficiency.
Blind Decomposition of Spectral Imaging Microscopy: A Study on Artificial and Real Test Data

Fabian J. Theis,Richard Neher,Andre Zeug

DOI: https://doi.org/10.1007/978-3-642-00599-2_69

2009-01-01

Abstract:Recently, we have proposed a blind source separation algorithm to separate dyes in multiply labeled fluorescence microscopy images. Applying the algorithm, we are able to successfully extract the dye distributions from the images. It thereby solves an often challenging problem since the recorded emission spectra of fluorescent dyes are environment and instrument specific. The separation algorithm is based on nonnegative matrix factorization in a Poisson noise model and works well on many samples. In some cases, however, additional cost function terms such as sparseness enhancement are necessary to arrive at a satisfactory decomposition. In this contribution we analyze the algorithm on two very well controlled real data sets. In the first case, known sources are artificially mixed in varying mixing conditions. In the second case, fluorescent beads are used to generate well behaved mixing situations. In both cases we can successfully extract the original sources. We discuss how the separation is influenced by the weight of the additional cost function terms, thereby illustrating that BSS can be be vastly improved by invoking qualitative knowledge about the nature of the sources.
Blind source separation techniques for the decomposition of multiply labelled

Richard A. Neher,Mišo Mitkovski,Frank Kirchhoff,Erwin Neher,Fabian J. Theis,André Zeug

2008-01-01

Abstract:* Kavli Institute for Theoretical Physics, University of California, address: Santa Barbara, CA, 93106 † Department of Molecular Biology of Neuronal Signals, Max Planck Institute of Experimental Medicine Göttingen, address: Hermann Rein Strasse 3, 37075 Göttingen, Germany ‡ Glial Physiology and Imaging, Neurogenetics, Max Planck Institute of Experimental Medicine Göttingen, address: Hermann Rein Strasse 3, 37075 Göttingen, Germany § Department Membranbiophysik, Max-Planck Institute for Biophysical Chemistry Göttingen, address: Am Fassberg 11, 37077 Göttingen, Germany ¶ Institute for Bioinformatics and Systems Biology, Helmholtz Zentrum München, address: Ingolstädter Landstraße 1, D-85764 Neuherberg, Germany || Max Planck Institute for Dynamics and Self-Organization, Göttingen, Germany, address: Bunsenstraße 10, 37073 Göttingen, Germany ** Department of Neurophysiology and Cellular Biophysics, University Göttingen, Germany †† Deutsche Forschungsgemeinschaft-Research Center for the Molecular Physiology of the Brain (FZT 103), Göttingen, Germany ‡‡ present address: Department of Cellular Neurophysiology, Hannover Medical School, Germany, address: Carl-Neuberg-Str. 1, 30625 Hannover, Germany
Blind source separation by sparse decomposition in a signal dictionary

M Zibulevsky,B A Pearlmutter

DOI: https://doi.org/10.1162/089976601300014385

Abstract:The blind source separation problem is to extract the underlying source signals from a set of linear mixtures, where the mixing matrix is unknown. This situation is common in acoustics, radio, medical signal and image processing, hyperspectral imaging, and other areas. We suggest a two-stage separation process: a priori selection of a possibly overcomplete signal dictionary (for instance, a wavelet frame or a learned dictionary) in which the sources are assumed to be sparsely representable, followed by unmixing the sources by exploiting the their sparse representability. We consider the general case of more sources than mixtures, but also derive a more efficient algorithm in the case of a nonovercomplete dictionary and an equal numbers of sources and mixtures. Experiments with artificial signals and musical sounds demonstrate significantly better separation than other known techniques.
A smart universal single-channel blind source separation method and applications

Qiao Zhou,Jie-Peng Yao,Jin-Hai Li,Zhong-Yi Wang,Lan Huang

DOI: https://doi.org/10.1007/s11045-022-00843-x

IF: 2.03

2022-08-14

Multidimensional Systems and Signal Processing

Abstract:In industrial, biological, medical and many more scenarios, single-channel blind source separation still remains challenges. A smart universal single-channel blind source separation method, the iterative heuristic general hybrid model with evaluation parameters feedback, Loop-BAS-VMD-ICA, is proposed and verified to recover the original sources automatically in multiple scenarios. Combined with beetle antennae search algorithm based variational mode decomposition and independent component analysis, by designing a new fitness function armed with processing effects of variational mode decomposition components and the final candidate source signals in each step of beetle antennae search algorithm, this model allows us to reconstruct a new optimized vector combining the selected components of variational mode decomposition with the original observation signal through a new scheme by loop mode with evaluation parameters feedback, and then the new vector is used to separate and extract independent source signals by iterative and heuristic calculation. Experimental results show that our method is not only smart, good versatile but also outperforms the state-of-the-art traditional time–frequency-based methods in extraction accuracy and waveform integrity. Compared with the state-of-the-art deep learning based methods, our method also demonstrates its unique advantages. It provides a better and more extensive means for the analysis and application of multicomponent signals.

engineering, electrical & electronic,computer science, theory & methods
Blind Source Separation Techniques for the Decomposition of Multiply Labeled Fluorescence Images.

Richard A. Neher,Miso Mitkovski,Frank Kirchhoff,Erwin Neher,Fabian J. Theis,Andre Zeug

DOI: https://doi.org/10.1016/j.bpj.2008.10.068

IF: 3.4

2009-01-01

Biophysical Journal

Abstract:Methods of blind source separation are used in many contexts to separate composite data sets according to their sources. Multiply labeled fluorescence microscopy images represent such sets, in which the sources are the individual labels. Their distributions are the quantities of interest and have to be extracted from the images. This is often challenging, since the recorded emission spectra of fluorescent dyes are environment- and instrument-specific. We have developed a nonnegative matrix factorization (NMF) algorithm to detect and separate spectrally distinct components of multiply labeled fluorescence images. It operates on spectrally resolved images and delivers both the emission spectra of the identified components and images of their abundance. We tested the proposed method using biological samples labeled with up to four spectrally overlapping fluorescent labels. In most cases, NMF accurately decomposed the images into contributions of individual dyes. However, the solutions are not unique when spectra overlap strongly or when images are diffuse in their structure. To arrive at satisfactory results in such cases, we extended NMF to incorporate preexisting qualitative knowledge about spectra and label distributions. We show how data acquired through excitations at two or three different wavelengths can be integrated and that multiple excitations greatly facilitate the decomposition. By allowing reliable decomposition in cases where the spectra of the individual labels are not known or are known only inaccurately, the proposed algorithms greatly extend the range of questions that can be addressed with quantitative microscopy.
Detection and Signal Processing for Near‐Field Nanoscale Fourier Transform Infrared Spectroscopy

Jonathan M. Larson,Hans A. Bechtel,Robert Kostecki

DOI: https://doi.org/10.1002/adfm.202406643

IF: 19

2024-10-03

Advanced Functional Materials

Abstract:Infrared near‐field nano‐FTIR is increasingly seen as an attractive methodology to characterize the physicochemical properties of materials at the nanoscale. However, complexities associated with technique implementation present challenges to data intuition, and interpretation, and can act as a barrier to entering the field. This work presents a detailed exposition and rigorous mathematical treatment of the technique to alleviate these challenges. Researchers from a broad spectrum of scientific and engineering disciplines are increasingly using scattering‐type near‐field infrared spectroscopic techniques to characterize materials non‐destructively with nanoscale spatial resolution. However, a sub‐optimal understanding of a technique's implementation can complicate data interpretation and act as a barrier to entering the field. Here the key detection and processing steps involved in producing scattering‐type near‐field nanoscale Fourier transform infrared spectra (nano‐FTIR) are outlined. The self‐contained mathematical and experimental work derives and explains: i) how normalized complex‐valued nano‐FTIR spectra are generated, ii) why the real and imaginary components of spectra qualitatively relate to dispersion and absorption respectively, iii) a new and generally valid equation for spectra which can be used as a springboard for additional modeling of the scattering processes, and iv) an algebraic expression that can be used to extract an approximation to the sample's local extinction coefficient from nano‐FTIR. The algebraic model for weak oscillators is validated with nano‐FTIR and attenuated total reflectance Fourier transform infrared (ATR‐FTIR) spectra on samples of polystyrene and Kapton and further provides a pedagogical pathway to cementing some of the technique's key qualitative attributes.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Detection and Signal Processing for Near-Field Nanoscale Fourier Transform Infrared Spectroscopy

Jonathan M. Larson,Hans A. Bechtel,Robert Kostecki

2023-03-18

Abstract:Researchers from a broad spectrum of scientific and engineering disciplines are increasingly using near-field infrared spectroscopic techniques to characterize materials nondestructively and with nanoscale spatial resolution. However, sub-optimal understanding of a technique's implementation can complicate data interpretation and even act as a barrier to enter the field. Here we outline the key detection and processing steps involved in producing scattering-type near-field nanoscale Fourier transform infrared spectra (nano-FTIR). The largely self-contained work (i) explains how normalized complex-valued nano-FTIR spectra are generated, (ii) rationalizes how the real and imaginary components of spectra relate to dispersion and absorption respectively, (iii) derives a new and generally valid equation for spectra which can be used as a springboard for additional modeling of the scattering processes, and (iv) provides an algebraic expression that can be used to extract the sample's local extinction coefficient from nano-FTIR. The algebraic expression is validated with nano-FTIR and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectra on samples of polystyrene and Kapton.

Optics,Materials Science,Applied Physics
A Robustness Analysis of Blind Source Separation

Alexander Schell

2023-03-18

Abstract:Blind source separation (BSS) aims to recover an unobserved signal $S$ from its mixture $X=f(S)$ under the condition that the effecting transformation $f$ is invertible but unknown. As this is a basic problem with many practical applications, a fundamental issue is to understand how the solutions to this problem behave when their supporting statistical prior assumptions are violated. In the classical context of linear mixtures, we present a general framework for analysing such violations and quantifying their impact on the blind recovery of $S$ from $X$. Modelling $S$ as a multidimensional stochastic process, we introduce an informative topology on the space of possible causes underlying a mixture $X$, and show that the behaviour of a generic BSS-solution in response to general deviations from its defining structural assumptions can be profitably analysed in the form of explicit continuity guarantees with respect to this topology. This allows for a flexible and convenient quantification of general model uncertainty scenarios and amounts to the first comprehensive robustness framework for BSS. Our approach is entirely constructive, and we demonstrate its utility with novel theoretical guarantees for a number of statistical applications.

Statistics Theory,Machine Learning
Determined Multichannel Blind Source Separation with Clustered Source Model

Jianyu Wang,Shanzheng Guan

2024-05-06

Abstract:The independent low-rank matrix analysis (ILRMA) method stands out as a prominent technique for multichannel blind audio source separation. It leverages nonnegative matrix factorization (NMF) and nonnegative canonical polyadic decomposition (NCPD) to model source parameters. While it effectively captures the low-rank structure of sources, the NMF model overlooks inter-channel dependencies. On the other hand, NCPD preserves intrinsic structure but lacks interpretable latent factors, making it challenging to incorporate prior information as constraints. To address these limitations, we introduce a clustered source model based on nonnegative block-term decomposition (NBTD). This model defines blocks as outer products of vectors (clusters) and matrices (for spectral structure modeling), offering interpretable latent vectors. Moreover, it enables straightforward integration of orthogonality constraints to ensure independence among source images. Experimental results demonstrate that our proposed method outperforms ILRMA and its extensions in anechoic conditions and surpasses the original ILRMA in simulated reverberant environments.

Sound,Audio and Speech Processing
Blind Separation Using Second Order Statistics for Non-Stationary Signals

Jun Du,Ju Liu,Shengju Sang,Jun Wang

DOI: https://doi.org/10.2298/csis1001163d

2010-01-01

Computer Science and Information Systems

Abstract:In the signal processing area, blind source separation (BSS) is a method aiming to recover independent sources from their linear instantaneous mixtures without resorting to any prior knowledge, such as mixing matrices and sources. There have been increased attentions given to blind source separation in many areas, including wireless communication, biomedical imaging processing, multi-microphone array processing, and so on in recent years. In this paper, we propose a new simple BSS technique that exploits second order statistics for nonstationary sources. Our technique utilizes the algebraic structure of the signal model and the subspace structures so as to efficiently recover sources with interference of noise. Computer simulations have demonstrated that, in comparison with other existent methods, our method has better performance in the regimes of low and medium SNRs. For high SNRs, our method is not as promising methods such as the method called AC ('alternating columns')-DC ('diagonal centers') algorithm, but it gives reasonable performance. This article has been retracted. Link to the retraction 10.2298/CSIS1004005U
Sparsity and adaptivity for the blind separation of partially correlated sources

Jerome Bobin,Jeremy Rapin,Anthony Larue,Jean-Luc Starck

DOI: https://doi.org/10.1109/TSP.2015.2391071

2014-12-09

Abstract:Blind source separation (BSS) is a very popular technique to analyze multichannel data. In this context, the data are modeled as the linear combination of sources to be retrieved. For that purpose, standard BSS methods all rely on some discrimination principle, whether it is statistical independence or morphological diversity, to distinguish between the sources. However, dealing with real-world data reveals that such assumptions are rarely valid in practice: the signals of interest are more likely partially correlated, which generally hampers the performances of standard BSS methods. In this article, we introduce a novel sparsity-enforcing BSS method coined Adaptive Morphological Component Analysis (AMCA), which is designed to retrieve sparse and partially correlated sources. More precisely, it makes profit of an adaptive re-weighting scheme to favor/penalize samples based on their level of correlation. Extensive numerical experiments have been carried out which show that the proposed method is robust to the partial correlation of sources while standard BSS techniques fail. The AMCA algorithm is evaluated in the field of astrophysics for the separation of physical components from microwave data.

Applications,Machine Learning
Source separation with an acoustic vector sensor for terrestrial bioacoustics

Irina Tolkova,Holger Klinck

DOI: https://doi.org/10.1121/10.0013505

Abstract:Passive acoustic monitoring is emerging as a low-cost, non-invasive methodology for automated species-level population surveys. However, systems for automating the detection and classification of vocalizations in complex soundscapes are significantly hindered by the overlap of calls and environmental noise. We propose addressing this challenge by utilizing an acoustic vector sensor to separate contributions from different sound sources. More specifically, we describe and implement an analytical pipeline consisting of (1) calculating direction-of-arrival, (2) decomposing the azimuth estimates into angular distributions for individual sources, and (3) numerically reconstructing source signals. Using both simulation and experimental recordings, we evaluate the accuracy of direction-of-arrival estimation through the active intensity method (AIM) against the baselines of white noise gain constraint beamforming (WNC) and multiple signal classification (MUSIC). Additionally, we demonstrate and compare source signal reconstruction with simple angular thresholding and a wrapped Gaussian mixture model. Overall, we show that AIM achieves higher performance than WNC and MUSIC, with a mean angular error of about 5°, robustness to environmental noise, flexible representation of multiple sources, and high fidelity in source signal reconstructions.
Underdetermined Blind Source Separation by a Novel Time–frequency Method

Qiao Su,Yuehong Shen,Yimin Wei,Changliang Deng

DOI: https://doi.org/10.1016/j.aeue.2017.04.025

IF: 3.169

2017-01-01

AEU - International Journal of Electronics and Communications

Abstract:This paper proposes a novel underdetermined blind source separation (UBSS) method based on short-time Fourier transform (STFT) to separate non-stationary sources. This method relaxes the premise in the subspace algorithm presented by Aissa-El-Bey et al. and allows that the number of active sources is no more than that of sensors by exploiting the statistic characteristic of sources and sparsity of non-stationary signals in time–frequency (TF) domain simultaneously. It first estimates the indexes of active sources in TF domain accurately by calculating the average power of sources at every TF point (except the point with the trivial energy contribution) and then obtains the estimation of source STFT by pseudo-inversion operator, which can avoid calculating the eigenvalue of covariance matrix of the mixtures and seeking the minimum of the object function based on subspace projection. Thus, the proposed algorithm has low computational cost and high separation quality. Simulation results validate the superiority of the proposed algorithm in comparison with the existing subspace-based algorithms.
A Matrix Pencil Approach to the Blind Source Separation of Artifacts in 2D NMR Spectra

K. Stadlthanner,F. J. Theis,E. W. Lang,A. M. Tomé,W. Gronwald,H.-R. Kalbitzer

2003-01-01

Abstract:Multidimensional proton nmr spectra of biomolecules dissolved in aqueous solutions are usually contaminated by an intense water artifact. We discuss the application of the generalized eigenvalue decomposition (GEVD) method using a matrix pencil to solve the blind source separation problem of removing the intense solvent peak and related artifacts. 2D NOESY spectra of simple solutes as well as dissolved proteins are studied.
Blind Source Separation Based Blind Speed Sidelobe Suppression Method for Radon Fourier Transform

Wenjie Liu,Jiangyun Deng,Zhi Sun

DOI: https://doi.org/10.1109/icsip61881.2024.10671421

2024-01-01

Abstract:The Radon Fourier transform (RFT) is widely used in high-speed target detection, which can effectively realize coherent integration (CI) under the condition that the range walk (RW) appears. However, the blind speed sidelobe (BSSL) phenomenon of RFT may cause false alarms and detection loss for multi-target detection. To solve these problems, the BSSL suppression based on blind source separation (BSS) technique is proposed in this paper. This method constructs the RFT response for the target from the position of the RFT main lobe, then the BSS is utilized to process the constructed response and the original RFT results to realize the sidelobe cleaning of the original RFT results. Simulation experiments prove the validity of the proposed method.
Linear-Quadratic Blind Source Separation Using NMF to Unmix Urban Hyperspectral Images

Inès Meganem,Yannick Deville,Shahram Hosseini,Philippe Déliot,Xavier Briottet,Ines Meganem,Philippe Deliot

DOI: https://doi.org/10.1109/tsp.2014.2306181

IF: 4.875

2014-04-01

IEEE Transactions on Signal Processing

Abstract:In this work, we propose algorithms to perform Blind Source Separation (BSS) for the linear-quadratic mixing model. The linear-quadratic model is less studied in the literature than the linear one. In this paper, we propose original methods that are based on Non-negative Matrix Factorization (NMF). This class of methods is well suited to many applications where the data are non-negative. We are here particularly interested in spectral unmixing (extracting reflectance spectra of materials present in pixels and associated abundance fractions) for urban hyperspectral images. The originality of our work is that we developed extensions of NMF, which is initially suited to the linear model, for the linear-quadratic model. The proposed algorithms are tested with simulated hyperspectral images using real reflectance spectra and the obtained results are very satisfactory.

engineering, electrical & electronic
Novel blind source separation algorithm for complex-valued signal

付卫红,杨小牛,刘乃安,曾兴雯

DOI: https://doi.org/10.3785/j.issn.1008-973X.2009.04.021

2009-01-01

Abstract:A novel fast blind source separation algorithm was presented to solve the problem of phase ambiguity in blind source separation of complex-valued digital communication signal. The algorithm extended the FastICA algorithm only applied to the real-valued signal to the complex-valued digital communication signal. The algorithm also eliminated the phase ambiguity of the communication complex-valued signals having the independent in-phase and quadrature components. The algorithm didn't consider the selection of step size and had fast convergence speed. Furthermore, the algorithm had stable separation performance just like FastICA algorithm. Simulation results show that the algorithm can separate not only the signals with the different carrier frequencies, but also with the same carrier frequencies; not only with the different modulation model, but also with the same modulation model.
Blind source separation methods for deconvolution of complex signals in cancer biology

Andrei Zinovyev,Ulykbek Kairov,Tatiana Karpenyuk,Erlan Ramanculov

DOI: https://doi.org/10.1016/j.bbrc.2012.12.043

2013-01-12

Abstract:Two blind source separation methods (Independent Component Analysis and Non-negative Matrix Factorization), developed initially for signal processing in engineering, found recently a number of applications in analysis of large-scale data in molecular biology. In this short review, we present the common idea behind these methods, describe ways of implementing and applying them and point out to the advantages compared to more traditional statistical approaches. We focus more specifically on the analysis of gene expression in cancer. The review is finalized by listing available software implementations for the methods described.

Quantitative Methods,Computational Engineering, Finance, and Science,Genomics
A novel framework for under-determined blind source separation based on adaptive source counting using mixed linear and circular data clustering algorithm for low latency applications

DOI: https://doi.org/10.1007/s11042-024-19121-y

IF: 2.577

2024-04-25

Multimedia Tools and Applications

Abstract:Underdetermined Blind Source Separation (UBSS) refers to a general class of signal processing algorithms, aiming to recover the underlying source signals from related mixtures without resorting to any prior information about the mixing matrix system and with less sensors than source signals. Technologies such as teleconferencing, hands-free telephony and hearing aids mostly require real-time processing. This matter is a major challenge in BSS problem, as traditional methods generally require significant amounts of data to generate sufficient statistics for separation. So, the proposed method is trying to give an overall solution for low latency applications. For this purpose, the High-Resolution Sub-Band Decomposition (HRSBD) algorithm in sparse time domain is utilized to compensate the low data efficiency of short time block lengths. Additionally, in contrast to the conventional methods which presume the known number of source signals during processing frames, we derive an adaptive source counting procedure in each processing block. Some clustering techniques assume a linear distribution for the audio mixture, whereas some others utilize circular statistics. Most of the linear approaches lead to failure in the case of directional data and most of the circular methods are unable to generalize in the case of multi-dimensional setup (multiple-microphone setup). Our research proves that the nature of mixing data in UBSS problem has both linear and circular features. Therefore, a new clustering scheme is proposed which effectively addresses the directional data and multi-dimensional setup simultaneously. Finally, we propose a separation procedure with low computational complexity which selects the best separation method considering the results of adaptive source counting phase of the algorithm. Experimental evaluations show the superiority of the proposed method against the state-of-the-art techniques according to the remarkable and dominant high performance of estimating the number of sources, mixing matrix estimation accuracy and the effective results of the source separation in both instantaneous and reverberant conditions.

computer science, information systems, theory & methods,engineering, electrical & electronic, software engineering

A new blind source separation framework for signal analysis and artifact rejection in functional Near-Infrared Spectroscopy

Rapid Second-Older Blind Source Separation Algorithm for Vibration Signals

Blind Decomposition of Spectral Imaging Microscopy: A Study on Artificial and Real Test Data

Blind source separation techniques for the decomposition of multiply labelled

Blind source separation by sparse decomposition in a signal dictionary

A smart universal single-channel blind source separation method and applications

Blind Source Separation Techniques for the Decomposition of Multiply Labeled Fluorescence Images.

Detection and Signal Processing for Near‐Field Nanoscale Fourier Transform Infrared Spectroscopy

Detection and Signal Processing for Near-Field Nanoscale Fourier Transform Infrared Spectroscopy

A Robustness Analysis of Blind Source Separation

Determined Multichannel Blind Source Separation with Clustered Source Model

Blind Separation Using Second Order Statistics for Non-Stationary Signals

Sparsity and adaptivity for the blind separation of partially correlated sources

Source separation with an acoustic vector sensor for terrestrial bioacoustics

Underdetermined Blind Source Separation by a Novel Time–frequency Method

A Matrix Pencil Approach to the Blind Source Separation of Artifacts in 2D NMR Spectra

Blind Source Separation Based Blind Speed Sidelobe Suppression Method for Radon Fourier Transform

Linear-Quadratic Blind Source Separation Using NMF to Unmix Urban Hyperspectral Images

Novel blind source separation algorithm for complex-valued signal

Blind source separation methods for deconvolution of complex signals in cancer biology

A novel framework for under-determined blind source separation based on adaptive source counting using mixed linear and circular data clustering algorithm for low latency applications