Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Chemiresistive H 2 S gas sensors based on composites of ZnO nanocrystals and foam-like GaN fabricated by photoelectrochemical etching and a sol-gel method

Chemiresistive H2S Gas Sensors Based on Composites of ZnO Nanocrystals and Foam-Like GaN Fabricated by Photoelectrochemical Etching and a Sol-Gel Method

Zno Ncs / F-Gan Composite Nanostructure-Based Gas Sensor Fabricated by Photoelectrochemical Etching and Sol-Gel Method and Its Outstanding H2s Sensing Properties

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

A selective NH3 gas sensor based on Fe2O3–ZnO nanocomposites at room temperature

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

In Situ Synthesis of Flower-Like ZnO on GaN Using Electrodeposition and Its Application As Ethanol Gas Sensor at Room Temperature

High-response H2S sensor based on ZnO/SnO2 heterogeneous nanospheres

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

High Performance Gas Sensor Based on ZnO/CuO Heterostructures

Electrodeposition of ZnO Nanorods Onto GaN Towards Enhanced H2S Sensing

ZnO-Al2O3 Nanocomposite As a Sensitive Layer for High Performance Surface Acoustic Wave H2S Gas Sensor with Enhanced Elastic Loading Effect

Improved H2 Detection Performance of GaN Sensor with Pt/Sulfide Treatment of Porous Active Layer Prepared by Metal Electroless Etching

3D Porous MXene Nanosheet/SnO 2 Nanoparticle Composites for H 2 S Gas Sensing

ZnO-CuO Hollow Nanocages Derived from Metal–Organic Frameworks for Selective H 2 S Sensing

ZnO Nanoparticle-Based MEMS Sensors for H 2 S Detection

ZnO@CuO hollow nanospheres based composites used for sensitive detection of hydrogen sulfide with long-term stability

Low-Cost and High-Performance ZnO Nanoclusters Gas Sensor Based on New-Type FTO Electrode for the Low-Concentration H₂S Gas Detection

ZnO-CuO Hollow Nanocages Derived from Metal–Organic Frameworks for Selective H2S Sensing

ZnO/GaN n-n heterojunction porous nanosheets for ppb-level NO 2 gas sensors

ZnO Nanoparticle-Based MEMS Sensors for H2S Detection