Abstract:Cement solidification is a commonly used pre-treatment method for municipal solid waste incineration fly ash (MSWIFA) prior to sanitary landfill. However, the long-term environmental risk of cement-solidified MSWIFA blocks in the exposed scenario of zoning sanitary landfill remains unclear. In this study, the leaching characteristics of different heavy metals in cement-solidified MSWIFA blocks under deionized water and acid rain scenarios were firstly investigated. The leaching control mechanisms of heavy metals were also explored and applied to established mechanical models for the estimation of long-term environmental risk. Results revealed that Pb leaching from cement-solidified MSWIFA blocks was controlled by diffusion; Cu, Cr and As leaching was mainly controlled by surface wash-off and diffusion; and Ni leaching was mainly controlled by diffusion and dissolution. Additionally, the established bulk diffusion, first-order reaction/diffusion and diffusion/dissolution models could accurately fit the abovementioned three types of heavy metals with different leaching control mechanisms (R-2 > 0.95). Under acid rain scenarios, according to the prediction results of the calibrated models, the cumulative leaching amount of Pb in 718 d was higher than the limit in GB16889-2008, the cumulative leaching amount of Cu, Cr, As and Ni did not exceed the limit in GB 16889-2008 even in 50 years. Therefore, the long-term environmental risk was relatively high for Pb but was low for Cu, Cr, As and Ni in cement-solidified MSWIFA blocks. This finding could be attributed to the strong alkali environment of cement-solidified MSWIFA blocks (pH > 12) that induced Pb salts (e.g. Pb(OH)(2) and PbSO4) dissolution. Therefore, the removal of partially soluble Pb salts from freshly made cement-solidified MSWIFA blocks by water or natural rainwater (e.g. without final cover system) washing in the initial landfilling stage (e.g. the leachate drainage system remains functional) is an effective countermeasure to reduce the environmental risks in zoning sanitary landfill.

Attenuation of Zn(II) and Cu(II) by low-alkali activated clay-fly ash liners

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Leaching behavior of aluminum, copper, iron and zinc from cement activated fly ash and slag stabilized soils

Cement and zeolite stabilization/solidification of heavy metal-contaminated sediments: 841-Day leaching characteristics, mechanisms, and microstructure

Adsorption of Metal Ions in Wastewater on Fly Ash

Retention Behaviour of Heavy Metals from Industrial Sludge Amended with Admixtures to Use Them as Liners for Landfill Facilities

Leaching of Arsenic, Chromium, and Copper from Coal Fly Ash Treated Soil

Eluviation and Leaching of Elements from Broken Fly-Ash-Based Porous Geopolymer

Heavy Metal Leaching Behaviour and Long-Term Environmental Risk Assessment of Cement-Solidified Municipal Solid Waste Incineration Fly Ash in Sanitary Landfill

The stabilization ability of NaA zeolite derived from fly ash for lead and cadmium in soil: Mechanisms and evaluation of effectiveness

Heavy Metal Removal from Aqueous Solutions Using Fly-Ash Derived Zeolite NaP1

Immobilization of Pb and Zn in Contaminated Soil Using Alumina-Silica Nano-Amendments Synthesized from Coal Fly Ash

LEACHING BEHAVIOR OF HEAVY METALS FROM MSWI FLY ASH

Impacts of wet treatment on leaching toxicity of municipal solid waste incineration bottom ash

Influence of intruding organic acids on the leaching dynamics of heavy metals in stabilized MSWI fly ash from landfills under various percolation conditions

Leaching Characteristics of Heavy Metals in Municipal Solid Waste Incinerator Fly Ash

Recovery of Zn and Cu from municipal solid waste incineration fly ash by integrating ammonium leaching and ammonia removal

Hydrothermal stabilization of fly ash from a fluidized bed incinerator co-firing refuse and coal

Effect of CaCl2 addition on heat treatment of heavy metals in municipal solid waste incineration fly ash

Leaching Characteristics of Heavy Metals During Cement Stabilization of Fly Ash from Municipal Solid Waste Incinerators

Suppressing Heavy Metal Leaching Through Ball Milling of Fly Ash