Abstract:Wellbore hydrate formation is a gradual problem. In this study, the wellbore is divided into fine nodes based on depth, and an iterative method is employed to solve the hydrate formation model. The maximum error in model validation is 6.86%. Hydrate formation in foam drainage gas recovery wells and the shut in accidents caused by plugging have become an important problem that restricts the safe production of natural gas. The blockage and accumulation of hydrates is a gradual problem. This research goes beyond predicting the formation of hydrates and delves deeper into examining the rate of hydrate formation and the degree of pipeline blockage at different wellbore locations. First, the temperature model, pressure model, multiphase flow model, and hydrate plugging model of hydrate formation process are established from the equations of mass conservation, energy conservation, and momentum conservation. Second, an iterative approach is employed to solve the model, with a maximum error of 6.86% in model validation. Finally, sensitivity analysis shows that wellhead temperature, wellhead pressure, and foam viscosity have different effects on hydrate formation, maximum plugging position, and plugging degree. At the same time, combined with the actual drainage and gas production process, and the characteristics of hydrate blockage, proposed hydrate prevention measures can be taken to achieve safe production of natural gas. The research results indicate that a decrease in temperature signifies an increase in undercooling, resulting in an accelerated rate of hydrate formation and an elevated risk of hydrate blockage. The decrease in wellhead pressure leads to a decrease in the rate of hydrate formation and an increase in production, which is beneficial for the hydrate prevention. However, larger pressure differences and gas production rates will put higher requirements on equipment such as well control devices. An increase in foam viscosity will lead to increased pressure, foam compression, reduced drainage capacity, and intensified hydrate generation. Therefore, foam viscosity should be kept as small as possible to keep the foam stable.

Prediction of Hydrate Formation Risk Based on Temperature–Pressure Field Coupling in the Deepwater Gas Well Cleanup Process

An Integrated Prediction Model of Hydrate Blockage Formation in Deep-Water Gas Wells

One-dimensional Analytical Model for Thermo-Hydro-mechanical Coupling Behaviour of Hydrates Overlying Layer During Gas Production

Wellbore Temperature and Pressure Field in Deep-water Drilling and the Applications in Prediction of Hydrate Formation Region

Hydrate deposition prediction model for deep-water gas wells under shut-in conditions

Gas-Liquid Flow Pattern and Hydrate Risk in Wellbore during the Deep-Water Gas-Well Cleanup Process

Research on the Formation and Plugging Risk of Gas Hydrate in a Deepwater Drilling Wellbore: A Case Study

Multiphase Flow Behavior in Deep Water Drilling: the Influence of Gas Hydrate

Prediction of Gas Hydrate Formation in the Wellbore

Prediction and management of hydrate reformation risk in pipelines during offshore gas hydrate development by depressurization

Assessment of forecasting hydrate blockage in foam drainage gas recovery wellbore

Hydrate Formation and Decomposition Regularities in Offshore Gas Reservoir Production Pipelines

Modeling of wellbore multiphase flow with free gas influx during horizontal drilling in marine hydrate reservoirs

Gas Kick Simulation for Offshore Gas-Hydrate Reservoir Drilling

Identification and prediction of hydrate–slug flow to improve safety and efficiency of deepwater hydrocarbon transportation

Improved Thermal Model for Hydrate Formation Drilling Considering Multiple Hydrate Decomposition Effects

Transient Gas–liquid–solid Flow Model with Heat and Mass Transfer for Hydrate Reservoir Drilling

Prediction of Hydrate Formation and Plugging in the Trial Production Pipes of Oﬀshore Natural Gas Hydrates

Prediction of hydrate formation and plugging in the trial production pipes of offshore natural gas hydrates

Simulation of Hydrate Plugging in High Pressure Gas Wells of Shanbei Gas Field

Multiphase non equilibrium pipe flow behaviors in the solid fluidization exploitation of marine natural gas hydrate reservoir